Brick Course Height Calculator

Updated

Brick Course Height Calculator adds one brick height and one bed joint to get the course height, then turns courses into a wall height or a wall height into whole courses of brick.

Quick Setup

Enter how many courses you will lay. The joint is the bed joint between courses.

courses
Brick, Base and ChartMortar bed

Use the actual brick height. A mortar bed under the first course adds one joint to the height.

courses
40 Courses of Modular Brick
8 ft 9 in Tall
105 in overall, with a joint under every course
2.625 in Course Height
Courses per Foot4.57
Courses per Meter15.00
Course height, also called the gauge, is one brick height plus one bed joint. Every other figure here is built from it.
0.417 in Joint Fits the Module
Module Fit3 courses = 8 in
Change From Your Joint+0.042 in
BIA sizes modular brick so whole courses land on a 4 in grid, such as three modular courses in 8 in. Metric work uses 100 mm.
26.25 in Every 10 Courses
Top of Course 513.125 in
Top of Course 2052.5 in
Marks for a story pole, measured from the base to the top of each course. The full list is in the coursing chart below.
2,667 mm Metric Height
At 39 Courses102.375 in
At 41 Courses107.625 in
The same height in the other measuring system, with one course fewer and one more so you can see the next landing points.
Brick Coursing Chart2.625 in per course
CourseInchesFeet and InchesMillimeters
12.6252⅝ in67
25.255¼ in133
37.8757⅞ in200
410.510½ in267
513.1251 ft 1⅛ in333
615.751 ft 3¾ in400
718.3751 ft 6⅜ in467
8211 ft 9 in533
923.6251 ft 11⅝ in600
1026.252 ft 2¼ in667
1128.8752 ft 4⅞ in733
1231.52 ft 7½ in800
1334.1252 ft 10⅛ in867
1436.753 ft 0¾ in933
1539.3753 ft 3⅜ in1,000
16423 ft 6 in1,067
1744.6253 ft 8⅝ in1,133
1847.253 ft 11¼ in1,200
1949.8754 ft 1⅞ in1,267
2052.54 ft 4½ in1,334
2155.1254 ft 7⅛ in1,400
2257.754 ft 9¾ in1,467
2360.3755 ft 0⅜ in1,534
24635 ft 3 in1,600
2565.6255 ft 5⅝ in1,667
2668.255 ft 8¼ in1,734
2770.8755 ft 10⅞ in1,800
2873.56 ft 1½ in1,867
2976.1256 ft 4⅛ in1,934
3078.756 ft 6¾ in2,000
3181.3756 ft 9⅜ in2,067
32847 ft 0 in2,134
3386.6257 ft 2⅝ in2,200
3489.257 ft 5¼ in2,267
3591.8757 ft 7⅞ in2,334
3694.57 ft 10½ in2,400
3797.1258 ft 1⅛ in2,467
3899.758 ft 3¾ in2,534
39102.3758 ft 6⅜ in2,600
401058 ft 9 in2,667
41107.6258 ft 11⅝ in2,734
42110.259 ft 2¼ in2,800
43112.8759 ft 4⅞ in2,867
44115.59 ft 7½ in2,934
45118.1259 ft 10⅛ in3,000
46120.7510 ft 0¾ in3,067
47123.37510 ft 3⅜ in3,134
4812610 ft 6 in3,200
Course Height Diagramh + t
h (brick)t (joint)h + twallheight

Course height = h + t  ·  Wall height = courses × (h + t)

Coursing Ready
40 courses at 2.625 in each stand 8 ft 9 in, counting a bed joint under the first course.

Brick Course Height Calculator and the 2.625 in Gauge

A brick course height is one brick height plus one bed joint. Masons also call it the gauge. A modular or standard US brick is 2 1/4 in high, and a 3/8 in joint brings the course to 2.625 in.

Here h is the actual brick height and t is the bed joint. The Brick Course Height Calculator opens with those two values and 40 courses. The wall comes out 105 in tall, which is 8 ft 9 in or 2,667 mm.

N is the number of courses. At a 2.625 in gauge there are 4.57 courses in a foot of height and 15.00 in a meter. Ten courses rise 26.25 in, a handy mark for a story pole.

One setting changes every answer by a joint. The tool counts a mortar bed under the first course, so each course brings its own joint. If the first course sits dry on a ledge or slab, choose Dry Base and the height drops by one joint. Forty courses then stand 104.625 in.

How Tall Is a Number of Brick Courses?

The heights below are for 2 1/4 in brick with a 3/8 in bed joint and a mortar bed under the first course. A wall described as 22 bricks high has 22 courses, so the same row applies.

CoursesInchesFeet and inchesMillimetersBIA modular coursing
37.8757 7/8 in2008 in
410.510 1/2 in26710 11/16 in
718.3751 ft 6 3/8 in4671 ft 6 11/16 in
923.6251 ft 11 5/8 in6002 ft 0 in
1128.8752 ft 4 7/8 in7332 ft 5 5/16 in
1231.52 ft 7 1/2 in8002 ft 8 in
1436.753 ft 0 3/4 in9333 ft 1 5/16 in
1744.6253 ft 8 5/8 in1,1333 ft 9 5/16 in
2052.54 ft 4 1/2 in1,3344 ft 5 5/16 in
2155.1254 ft 7 1/8 in1,4004 ft 8 in
2257.754 ft 9 3/4 in1,4674 ft 10 11/16 in
2360.3755 ft 0 3/8 in1,5345 ft 1 5/16 in
24635 ft 3 in1,6005 ft 4 in
2873.56 ft 1 1/2 in1,8676 ft 2 11/16 in
3078.756 ft 6 3/4 in2,0006 ft 8 in
3181.3756 ft 9 3/8 in2,0676 ft 10 11/16 in
32847 ft 0 in2,1347 ft 1 5/16 in
3489.257 ft 5 1/4 in2,2677 ft 6 11/16 in

So 3 courses of brick are 7 7/8 in tall, 7 courses are 18 3/8 in and 12 courses are 31 1/2 in. A wall 14 bricks high stands just over 3 ft. A 28 course wall reaches 6 ft 1 1/2 in, and 34 courses reach 7 ft 5 1/4 in.

The Brick Course Height Calculator builds the same chart for any brick and joint. It lists every course up to the length you set, from 5 to 300 courses, in inches, feet and inches, and millimeters.

Why BIA Coursing Charts Read Higher

The last column in the chart follows the Brick Industry Association. Technical Note 10 sets modular brick at three courses to 8 in, so walls line up with a 4 in building grid. That makes each course 2.667 in, not 2.625 in.

The difference is the joint. Three 2 1/4 in bricks in 8 in leave 0.417 in for each bed joint, a little over 3/8 in. The Brick Course Height Calculator shows this as the joint that fits the module, with the change from your own joint beside it.

The gap grows with height. At 12 courses the two methods are 1/2 in apart, 31 1/2 in against 32 in. At 30 courses they are 1 1/4 in apart. Ask which one the drawings use before you mark a story pole.

Other brick sizes have their own fit. The table gives the course height at a 3/8 in joint, the courses in a foot, and the module each size lands on.

BrickBrick heightCourse heightCourses per footModule fitJoint for that fit
Modular, Standard2 1/4 in2.625 in4.573 courses = 8 in0.417 in
King2 5/8 in3 in4.004 courses = 12 in0.375 in
Queen2 3/4 in3.125 in3.845 courses = 16 in0.45 in
Engineer2 13/16 in3.188 in3.765 courses = 16 in0.388 in
Closure, Utility3 5/8 in4 in3.001 course = 4 in0.375 in

Brick dimensions and how long a brick is

Course height uses only the brick height, but the other brick dimensions matter for the count. A modular brick is 3 5/8 in deep, 2 1/4 in high and 7 5/8 in long. A standard brick is the same except for its 8 in length.

Three modular bricks laid end to end with two 3/8 in joints measure 23 5/8 in. Add the third joint and the run is an even 24 in. For the number of bricks in a wall, the Brick Calculator works from wall length and height.

Brick Course Height Calculator in Feet

Most layouts start from a height in feet, such as a sill, a door head or the top of a wall. Set Solve For to Courses for a Wall Height. The Brick Course Height Calculator divides the height by the course height and rounds down to whole courses.

Wall heightCourses by divisionFull coursesShort of the heightJoint to land exactly
3 ft13.71131.875 in0.519 in
4 ft18.29180.75 in0.417 in
6 ft27.43271.125 in0.417 in
8 ft36.57361.5 in0.417 in
9 ft41.14410.375 in0.384 in
10 ft45.71451.875 in0.417 in

An 8 ft wall takes 36 full courses of modular brick and stops 1 1/2 in short. Opening each bed joint to 0.417 in lands the 36th course on 8 ft exactly. That is the BIA module again, since 8 ft is twelve lots of 8 in.

The other two modes work backward. Joint to Hit a Height takes a height and a course count and returns the bed joint. Brick Height to Fit returns the brick height and names the closest standard size.

The same coursing sets the height of a round wall. The Brick Circle Calculator counts the bricks in each course of a fire pit. Block rises faster than brick, so use the Concrete Block Calculator for a CMU wall.

Brick Course Height Calculator in Meters

Enter the wall height in meters or millimeters and the Brick Course Height Calculator gives every result in metric, even with the brick left in inches. A 3 m wall in modular brick takes 44 full courses at 66.7 mm each and stops 66.3 mm short.

When you solve for wall height from a course count, the brick unit decides instead. Switch the brick height to millimeters and the chart lists each course in millimeters and meters, with feet and inches alongside.

Brick course height calculator India

Two India presets follow IS 1077 and set a 10 mm joint. The modular brick is 90 mm high, so each course is 100 mm and ten courses make a meter. A 3 m wall takes exactly 30 courses.

The 70 mm brick gives an 80 mm course, or 12.5 courses per meter. A 3 m wall takes 37 full courses and stops 40 mm short. Five courses reach 400 mm, so this brick lands on every fourth 100 mm line.

UK 65 mm brick

The Brick Development Association gives UK brick a co-ordinating size of 225 by 112.5 by 75 mm with a nominal 10 mm joint in its brickwork dimensions guide. The UK 65 mm preset uses that brick with a 10 mm joint. Each course is 75 mm, four courses are 300 mm, and a 2.4 m wall takes 32 courses.

Brick Course Height Calculator PDF Charts

Printed coursing charts are fixed to one brick and one joint. The BIA chart in Technical Note 10 is a PDF, and its Table 3 lists courses 1 to 50, plus 100, for four coursing modules. It suits modular work laid to the 4 in grid.

For any other joint, build the chart in the tool. Set the brick, the joint and the chart length, then press Print or Save PDF. The coursing chart opens for printing, and saving it as a PDF gives a chart for your own brick and joint.

Brick Count and Cost Questions

How many bricks are in 1 ft?

Going up, 1 ft of wall height holds 4.57 courses of modular brick. Going along, 1 ft of a course holds 1.5 bricks, because each brick and joint takes 8 in.

How many bricks for 1 sq ft?

One square foot of wall takes 6.86 modular bricks with a 3/8 in joint. That is 1.5 bricks along times 4.57 courses up. BIA's nominal coursing gives 6.75.

How many bricks are in a 12 x 12 room?

A 12 by 12 ft room with 8 ft walls has 384 sq ft of wall. That needs 2,634 modular bricks, or 2,765 with 5% waste. Each 8 ft wall is 36 full courses at a 2.625 in course height.

What is the cost of 1,000 bricks?

Brick is priced per thousand, and the price depends on the brick and the supplier. At a sample price of $750 per 1,000, 30 bricks cost $22.50 and 5,000 bricks cost $3,750. The price of one brick in India varies by kiln and city, so multiply your count by a local quote.