Concrete slab cost calculator for patios, driveways and floors that turns slab size and local prices into concrete yards, delivery fees, gravel base, labor, bag counts and a total.
Enter your local ready-mix and labor prices; delivery, base and reinforcement are in the sections below.
Delivery, Base and Reinforcement
Bagged Concrete Option
Slab Plan and Control Joints
Cost Breakdown
| Item | Cost | Per sq ft | Share |
|---|---|---|---|
| Ready-mix concrete | $829.63 | $2.07 | 27.6% |
| Delivery | $150.00 | $0.38 | 5% |
| Rebar or mesh | $200.00 | $0.50 | 6.7% |
| Gravel base | $222.22 | $0.56 | 7.4% |
| Labor, form and finish | $1,600.00 | $4.00 | 53.3% |
| Finish upgrade | $0.00 | $0.00 | 0% |
| Total | $3,001.85 | $7.50 | 100% |
Cost by Slab Size
| Slab Size | Concrete | Total Cost | Per sq ft |
|---|---|---|---|
| 10 × 10 ft | 1.3 cu yd | $963 | $9.63 |
| 12 × 12 ft | 1.87 cu yd | $1,277 | $8.87 |
| 14 × 20 ft | 3.63 cu yd | $2,246 | $8.02 |
| 20 × 20 ft | 5.19 cu yd | $3,002 | $7.50 |
| 20 × 30 ft | 7.78 cu yd | $4,428 | $7.38 |
| 30 × 30 ft | 11.67 cu yd | $6,567 | $7.30 |
| 25 × 40 ft | 12.96 cu yd | $7,280 | $7.28 |
| 30 × 40 ft | 15.56 cu yd | $8,706 | $7.25 |
| 40 × 60 ft | 31.11 cu yd | $17,261 | $7.19 |
Step-by-Step Slab Cost Math
Line Items Inside a Concrete Slab Cost Calculator Total
A 20 × 20 ft slab 4 in thick comes to about $3,002, or $7.50 per sq ft, at sample prices of $160 per cubic yard of ready-mix and $4 per sq ft of labor.
In that concrete slab cost calculator total, labor is over half, and the concrete itself is just over a quarter.
| Line Item | Basis | Cost | Per sq ft | Share |
|---|---|---|---|---|
| Ready-mix concrete | 5.19 cu yd at $160 | $829.63 | $2.07 | 27.6% |
| Delivery | One truck, no short load | $150 | $0.38 | 5% |
| Rebar or mesh | $0.50 per sq ft | $200 | $0.50 | 6.7% |
| Gravel base | 4 in, 4.94 cu yd at $45 | $222.22 | $0.56 | 7.4% |
| Labor, forms and finish | $4 per sq ft | $1,600 | $4 | 53.3% |
| Total | 400 sq ft | $3,001.85 | $7.50 | 100% |
Every price above is a sample input, not a market quote. A concrete slab cost calculator total is only as good as the local ready-mix, labor and gravel prices behind it, so get each one from a supplier or contractor near the job.
In concrete slab cost calculator math, V is the order in cubic yards, L and W are the slab length and width in feet, t is the thickness in inches and w is the waste allowance as a decimal. The 12 converts inches to feet, and 27 converts cubic feet to yards.
For the 20 × 20 slab, 20 × 20 × 4 ÷ 12 ÷ 27 = 4.94 cu yd, and 5% waste brings the order to 5.19 cu yd. At 10% waste the order is 5.43 cu yd, which adds about $40 to a $3,000 job but avoids a short pour.
Labor rate moves a concrete slab cost calculator total more than any material. At $8 per sq ft of labor instead of $4, the same slab reaches $4,602, or $11.50 per sq ft, while raising ready-mix from $160 to $200 per cubic yard only lifts it to $8.02 per sq ft.
Slab Totals From 10×10 to 40×60
At the same sample prices and 4 in thick, a 10 × 10 slab costs about $963, a 20 × 20 about $3,002, a 30 × 40 about $8,706 and a 40 × 60 about $17,261.
Small slabs cost more per square foot in any concrete slab cost calculator result, because fixed fees spread over less area.
| Slab | Area | Concrete to Order | Short-Load Fee | Total | Per sq ft |
|---|---|---|---|---|---|
| 10 × 10 ft | 100 sq ft | 1.3 cu yd | $100 | $963 | $9.63 |
| 12 × 12 ft | 144 sq ft | 1.87 cu yd | $100 | $1,277 | $8.87 |
| 14 × 20 ft | 280 sq ft | 3.63 cu yd | $100 | $2,246 | $8.02 |
| 20 × 20 ft | 400 sq ft | 5.19 cu yd | None | $3,002 | $7.50 |
| 20 × 30 ft | 600 sq ft | 7.78 cu yd | None | $4,428 | $7.38 |
| 30 × 30 ft | 900 sq ft | 11.67 cu yd | None | $6,567 | $7.30 |
| 25 × 40 ft | 1,000 sq ft | 12.96 cu yd | None | $7,280 | $7.28 |
| 30 × 40 ft | 1,200 sq ft | 15.56 cu yd | None | $8,706 | $7.25 |
| 40 × 60 ft | 2,400 sq ft | 31.11 cu yd | None | $17,261 | $7.19 |
Each concrete slab cost calculator total in the table includes 5% waste, $150 delivery, $0.50 per sq ft for rebar or mesh, a 4 in gravel base at $45 per cubic yard and $4 per sq ft of labor. Every slab under 4 cu yd also carries a $100 short-load fee.
The 14 × 20 slab shows the short-load fee at work in a concrete slab cost calculator estimate. At 3.63 cu yd it sits just under the 4 cu yd minimum, so the $100 short-load charge lifts it to $8.02 per sq ft, while a 20 × 20 slab avoids the fee at $7.50.
A 40 × 60 pour of 31.11 cu yd is more than one truck carries, so expect several loads and plan the pour sequence. A concrete slab cost estimator figure at that size should be checked against the plant's per-load delivery terms.
The Concrete Calculator works out cubic yards and bags for footings and other shapes when the pour is not a plain rectangle.
Thickness and Cost per Square Foot at 4, 5 and 6 Inches
Going from 4 in to 6 in adds half again as much concrete but only about $1 per sq ft to a concrete slab cost calculator total. A 400 sq ft slab runs $7.50 per sq ft at 4 in, $8.02 at 5 in and $8.54 at 6 in at the sample prices.
| Thickness | 400 sq ft Concrete | 400 sq ft Total | Per sq ft | 1,000 sq ft Concrete | 1,000 sq ft Total | Per sq ft |
|---|---|---|---|---|---|---|
| 4 in | 5.19 cu yd | $3,002 | $7.50 | 12.96 cu yd | $7,280 | $7.28 |
| 5 in | 6.48 cu yd | $3,209 | $8.02 | 16.2 cu yd | $7,798 | $7.80 |
| 6 in | 7.78 cu yd | $3,417 | $8.54 | 19.44 cu yd | $8,317 | $8.32 |
Each added inch in a concrete slab cost calculator estimate costs only its concrete, because labor, gravel and reinforcement are priced per square foot.
That makes a 4 inch concrete slab cost per square foot the floor, and every inch above it adds about $0.52 per sq ft at $160 per cubic yard.
Thickness also sets the control joint spacing in the section below. A 6 in slab can run joints 15 ft apart instead of 10, so fewer saw cuts partly offset its extra concrete on a large pour.
Decorative work changes a concrete slab cost calculator result far more than thickness. Adding $8 per sq ft for a stamped finish takes the 20 × 20 slab from $3,002 to $6,202, or $15.50 per sq ft, more than double the broom-finished slab.
Ready-Mix per Cubic Yard and Short-Load Fees
A $160 per cubic yard quote becomes $189 per yard delivered on a 20 × 20 slab, and $353 per yard on a 10 × 10 slab.
For a concrete slab cost calculator per-yard figure, the delivery charge and short-load fee are fixed per truck, so small orders pay far more per yard.
| Slab Area | Concrete to Order | Short-Load Fee | Ready-Mix Delivered | Effective Price per cu yd |
|---|---|---|---|---|
| 100 sq ft | 1.3 cu yd | $100 | $457.41 | $352.86 |
| 144 sq ft | 1.87 cu yd | $100 | $548.67 | $293.93 |
| 280 sq ft | 3.63 cu yd | $100 | $830.74 | $228.88 |
| 400 sq ft | 5.19 cu yd | None | $979.63 | $188.93 |
| 1,000 sq ft | 12.96 cu yd | None | $2,224.07 | $171.57 |
The table uses $150 delivery and a $100 fee under a 4 cu yd minimum. Plants set their own minimum and fee, so a concrete slab price per cubic yard comparison only works once those terms are in the quote.
Pump hire is a separate flat charge in a concrete slab cost calculator budget. A $600 pump on the 20 × 20 slab lifts the total from $3,002 to $3,602, or $9 per sq ft, so it pays only when the truck cannot reach the forms.
Site-batched concrete swaps the ready-mix line for cement, sand and stone bought separately. That split for nominal mixes such as 1:2:4 is worked out in the Concrete Mix Calculator from the slab volume.
Bagged Mix Against a Delivered Truck
In a concrete slab cost calculator comparison, bagged concrete costs less than ready-mix only on small slabs.
At $6.50 per 80 lb bag, a 10 × 10 slab needs 59 bags for $383.50 against $457.41 delivered, but a 20 × 20 slab needs 234 bags for $1,521 against $979.63.
The Quikrete Concrete Mix data sheet gives yields of 0.30 cu ft for a 40 lb bag, 0.45 for 60 lb, 0.60 for 80 lb and 0.675 for a 90 lb bag, with a typical 4,000 psi at 28 days.
| Slab Area | Concrete | 80 lb Bags | Bag Cost at $6.50 | Ready-Mix Delivered | Bags Minus Ready-Mix |
|---|---|---|---|---|---|
| 50 sq ft | 0.65 cu yd | 30 | $195 | $353.70 | -$158.70 |
| 100 sq ft | 1.3 cu yd | 59 | $383.50 | $457.41 | -$73.91 |
| 144 sq ft | 1.87 cu yd | 84 | $546 | $548.67 | -$2.67 |
| 150 sq ft | 1.94 cu yd | 88 | $572 | $561.11 | +$10.89 |
| 400 sq ft | 5.19 cu yd | 234 | $1,521 | $979.63 | +$541.37 |
The concrete slab cost calculator crossover lands near a 12 × 12 slab at these prices. Below about 144 sq ft bags save money, and above it the truck wins, even with a short-load fee, because 45 bags of 80 lb make only one cubic yard.
Bag count is also labor. Eighty-four bags of 80 lb is 6,720 lb to lift, mix and place, so a concrete calculator bags figure near the crossover usually favors the truck once the crew's time is counted.
Control Joint Spacing and Saw-Cut Depth
A 4 in slab needs control joints no more than 10 ft apart, a 5 in slab 12.5 ft and a 6 in slab 15 ft. The cuts go at least a quarter of the slab deep, so 1 in on a 4 in slab and 1 1/2 in on a 6 in slab.
Those spacings follow ACI PRC-330-21 as summarized in the NRMCA jointing guide, which also allows a 1 in cut with an early-entry saw. It warns that a shallower cut may not activate the joint, so cracks form elsewhere.
| Slab | Thickness | Max Spacing | Panels | Joint Length | Saw-Cut Depth |
|---|---|---|---|---|---|
| 20 × 20 ft | 4 in | 10 ft | 2 × 2 | 40 lin ft | 1 in |
| 30 × 40 ft | 4 in | 10 ft | 4 × 3 | 170 lin ft | 1 in |
| 30 × 40 ft | 6 in | 15 ft | 3 × 2 | 100 lin ft | 1 1/2 in |
| 40 × 60 ft | 4 in | 10 ft | 6 × 4 | 380 lin ft | 1 in |
| 40 × 60 ft | 6 in | 15 ft | 4 × 3 | 240 lin ft | 1 1/2 in |
Saw-cut footage is a concrete slab cost calculator line of its own when a contractor bills per foot. Going from 4 in to 6 in on a 40 × 60 slab cuts the joints from 380 to 240 lin ft, which offsets part of the 6 in slab's extra concrete.
Narrow slabs need more joints than spacing alone suggests. Each panel should stay no longer than 1.5 times its width, so a 4 ft walk gets a joint every 6 ft or less, not every 10 ft.
| Walk or Strip, 4 in | Panels by 10 ft Spacing | Panels at 1.5 to 1 | Panel Size | Joint Length |
|---|---|---|---|---|
| 30 × 4 ft | 3 | 5 | 6 × 4 ft | 16 lin ft |
| 40 × 4 ft | 4 | 7 | 5.71 × 4 ft | 24 lin ft |
| 50 × 3 ft | 5 | 12 | 4.17 × 3 ft | 33 lin ft |
A 30 × 4 ft walk cut only every 10 ft would leave 10 × 4 ft panels, 2.5 times longer than wide, which tend to crack across the middle. Cutting it into five 6 × 4 ft panels adds only 8 lin ft of sawing to a concrete slab cost calculator joint count.
Timing matters as much as layout. The NRMCA guide puts conventional sawing within roughly 4 to 12 hours of placing, as soon as the cut does not ravel the edges, so the saw crew has to be booked for pour day.
Joints control where the slab cracks as it shrinks. The Concrete Shrinkage Calculator estimates that drying length change, and the Concrete Reinforcing Mesh Calculator prices the mesh that holds those cracks tight.
Tonnage and Pounds per Square Foot
A 4 in slab weighs about 47 to 50 lb per sq ft, so a 20 × 20 slab is 9.3 to 10 tons of concrete. That concrete slab cost calculator weight decides whether the ground, a deck or a suspended floor can carry the pour.
| Thickness | lb per sq ft | 20 × 20 Slab | 25 × 40 Slab |
|---|---|---|---|
| 4 in | 46.7 to 50 | 9.3 to 10 tons | 23.3 to 25 tons |
| 5 in | 58.3 to 62.5 | 11.7 to 12.5 tons | 29.2 to 31.3 tons |
| 6 in | 70 to 75 | 14 to 15 tons | 35 to 37.5 tons |
These weights use normal-weight concrete at 140 to 150 lb per cu ft. Each cubic yard is therefore 1.9 to 2 tons, which is why a 40 × 60 pour of 31.11 cu yd arrives in several trucks rather than one.
In metric, the 20 × 20 ft slab is 37.16 m², orders 3.97 m³ and costs about $80.78 per m² at the sample prices, so a concrete slab cost calculator per square foot figure converts by multiplying by 10.76.
Answering Common Slab Budget Questions
Two budget questions come up after the size table. Both answers use the same 4 in thickness, 5% waste and concrete slab cost calculator sample prices as every table.
How much does a 1000 sq ft slab cost?
A 1,000 sq ft slab 4 in thick costs about $7,280 at the concrete slab cost calculator sample prices, or $7.28 per sq ft. It takes 12.96 cu yd of concrete with 5% waste, about $2,074 of ready-mix and $4,000 of labor at $4 per sq ft.
Dropping the gravel base and reinforcement brings the same slab to $6,224, or $6.22 per sq ft, which is closer to what many quick estimates call average. Those two lines add about $1,056 on 1,000 sq ft and are worth keeping for any slab that carries a vehicle.
Is it cheaper to concrete or slab?
Mixing bagged concrete yourself is cheaper only for slabs under about 144 sq ft, and a delivered ready-mix slab is cheaper above that. At 400 sq ft, 234 bags cost $541 more than 5.19 cu yd from a truck.
Hiring the whole slab adds labor, which runs $1,600 on a 20 × 20 slab at $4 per sq ft. Doing the work yourself saves that line but still needs forms, gravel, a screed, a bull float and a saw for the control joints.