Cubic meters calculator volumes for boxes, slabs, holes, tanks and cartons in mm, cm, m, inches or feet, with CBM, W/M sea freight, air volumetric weight, gravel tonnes and liters.
Each side has its own unit, so 12 ft × 10 ft × 4 in works as typed.
Quantity, Material and Price
Volume Diagram
Cubic Meters in Other Units
| Unit | Your Volume | In 1 m³ |
|---|---|---|
| Cubic Meters (m³) | 1.13267 m³ | 1 m³ |
| Cubic Feet (ft³) | 40 ft³ | 35.3147 ft³ |
| Cubic Yards (yd³) | 1.48148 yd³ | 1.30795 yd³ |
| Cubic Inches (in³) | 69,120 in³ | 61,023.7 in³ |
| Liters (L) | 1,132.67 L | 1,000 L |
| US Gallons (US gal) | 299.221 US gal | 264.172 US gal |
| Imperial Gallons (imp gal) | 249.153 imp gal | 219.969 imp gal |
| Cubic Centimeters (cm³) | 1,132,674 cm³ | 1,000,000 cm³ |
| US Bushels (US bu) | 32.1426 US bu | 28.3776 US bu |
Weight by Material
| Material | Density | Weight | US Tons |
|---|---|---|---|
| Concrete | 2,403 kg/m³ | 2,722 kg | 3.000 US tons |
| Water | 1,000 kg/m³ | 1,133 kg | 1.249 US tons |
| Topsoil (Loose) | 950 kg/m³ | 1,076 kg | 1.186 US tons |
| Dry Earth (Loose) | 1,510 kg/m³ | 1,710 kg | 1.885 US tons |
| Gravel, Dry (Loose) | 1,690 kg/m³ | 1,914 kg | 2.110 US tons |
| Sand, Dry (Loose) | 1,420 kg/m³ | 1,608 kg | 1.773 US tons |
| Sand and Gravel (Loose) | 1,720 kg/m³ | 1,948 kg | 2.148 US tons |
| Crushed Stone (Loose) | 1,600 kg/m³ | 1,812 kg | 1.998 US tons |
| Clay (Loose) | 1,660 kg/m³ | 1,880 kg | 2.073 US tons |
Step-by-Step Math
Box and Room Volumes in a Cubic Meters Calculator
Cubic meters equal length times width times height, with every side in meters. A room 4 m long, 3.5 m wide and 2.6 m high holds 4 × 3.5 × 2.6 = 36.4 m³, which is 36,400 liters or 1,285.45 cubic feet.
V is the volume in cubic meters, and L, W and H are the three sides in meters. Convert each side first in any cubic meters calculator estimate, using 0.01 for centimeters, 0.001 for millimeters, 0.3048 for feet and 0.0254 for inches.
Centimeters are where hand math slips. A 60 × 40 × 40 cm carton is 96,000 cm³, and dividing by 100 gives 960, a nonsense figure, while dividing by 1,000,000 gives the true 0.096 m³ in the CBM calculation formula in cm.
| Job | Sides as Measured | Cubic Meters | Liters | Cubic Feet |
|---|---|---|---|---|
| Carton | 60 × 40 × 40 cm | 0.096 | 96 | 3.39 |
| Pallet load | 1,200 × 800 × 1,500 mm | 1.44 | 1,440 | 50.85 |
| Concrete slab | 5 m × 4 m × 100 mm | 2.00 | 2,000 | 70.63 |
| Footing trench | 10 m × 450 mm × 600 mm | 2.70 | 2,700 | 95.35 |
| Slab in feet and inches | 12 ft × 10 ft × 4 in | 1.133 | 1,133 | 40.00 |
| Room | 4 × 3.5 × 2.6 m | 36.40 | 36,400 | 1,285.45 |
Mixed units need no cleanup if each side is converted on its own. The 12 ft × 10 ft × 4 in slab is 3.6576 × 3.048 × 0.1016 m, so a cubic meters calculator in inches and feet lands on the same 1.133 m³ as a metric tape would.
Floor area times depth works the same way. A 20 m² floor at 100 mm deep is 2 m³, and the Square Meter Calculator sorts out the area of L-shaped or round rooms first.
Concrete, Soil and Gravel by Weight per m³
Weight is volume times density, the step behind every cubic meters calculator concrete or soil order.
Normal-weight concrete at 150 lb/ft³ is 2,403 kg per cubic meter, so the 5 m × 4 m × 100 mm slab weighs about 4,806 kg, or 4.8 tonnes, before any rebar.
Bulk materials have two densities. The Cat earthwork reference tables list a bank figure for ground in place and a lower loose figure once it is dug and heaped, and suppliers sell by the loose figure.
| Material | Loose kg/m³ | Bank kg/m³ | Swell, Bank to Loose | m³ in 20 Tonnes, Loose |
|---|---|---|---|---|
| Concrete | 2,403 | -- | -- | 8.32 |
| Water | 1,000 | -- | -- | 20.00 |
| Topsoil | 950 | 1,370 | × 1.442 | 21.05 |
| Dry earth | 1,510 | 1,900 | × 1.258 | 13.25 |
| Gravel, dry | 1,690 | 1,900 | × 1.124 | 11.83 |
| Sand, dry | 1,420 | 1,600 | × 1.127 | 14.08 |
| Sand and gravel | 1,720 | 1,930 | × 1.122 | 11.63 |
| Crushed stone | 1,600 | -- | -- | 12.50 |
| Clay | 1,660 | 2,020 | × 1.217 | 12.05 |
Digging grows the pile. A 10 m³ hole in clay leaves about 12.17 m³ of loose spoil, and 10 m³ of topsoil stripped in place heaps up to 14.42 m³, so skip and truck counts in a cubic meters calculator soil estimate come from the loose figure.
For a kilos to cubic meters calculator answer, divide the weight by the loose density. A 20 tonne load of dry gravel fills 11.83 m³, while the same 20 tonnes of topsoil fills 21.05 m³, almost twice the space.
Concrete and topsoil prices quoted per cubic yard convert at 0.764555 m³ per yard, so $150 per yard is $196.19 per m³. Yard-based orders carry on in the Cubic Yard Calculator.
Shipping CBM for Cartons, Sea and Air
Shipping CBM is one carton's length × width × height in meters times the carton count. Fifty cartons of 24 × 18 × 16 in are 0.1133 m³ each and 5.663 m³ in total, at 35 lb each, or 793.8 kg gross.
Sea LCL freight bills per W/M ton, the greater of total cubic meters or metric tonnes at one to one. Those 50 cartons are 5.663 m³ against 0.794 t, so they bill as 5.663 W/M, which is $339.80 at a $60 rate.
Air freight swaps the ratio. IATA's general cargo rule divides cm³ by 6,000 to get a volumetric weight in kilograms, and express couriers divide by 5,000.
The same 50-carton shipment is 943.9 kg by air and 1,132.7 kg by courier, both above its 793.8 kg scale weight.
| Carton | Gross Weight | CBM | Air at ÷6,000 | Courier at ÷5,000 | Sea W/M |
|---|---|---|---|---|---|
| 40 × 30 × 20 cm | 5 kg | 0.024 | 4.0 kg | 4.8 kg | 0.024 |
| 50 × 40 × 30 cm | 8 kg | 0.060 | 10.0 kg | 12.0 kg | 0.060 |
| 60 × 40 × 40 cm | 15 kg | 0.096 | 16.0 kg | 19.2 kg | 0.096 |
| 40 × 30 × 30 cm | 40 kg | 0.036 | 6.0 kg | 7.2 kg | 0.040 |
| Pallet, 120 × 80 × 150 cm | 400 kg | 1.440 | 240.0 kg | 288.0 kg | 1.440 |
The density break points decide the bill. Cargo lighter than 167 kg/m³ pays air by volume, lighter than 200 kg/m³ pays courier by volume, and only cargo denser than 1,000 kg/m³ pays sea freight by weight, like the 40 kg carton above at 1,111 kg/m³.
Measure the outside of each packed carton for any cubic meters calculator shipping quote, since forwarders bill the space the box takes, not the goods inside. That is the core of how to calculate CBM for a sea shipment.
Container Fit for 20 ft, 40 ft and High Cube
A container holds fewer cartons than a cubic meters calculator volume split suggests. A 20 ft box holds 33.2 m³ per Maersk's cargo limits.
That is 345.8 cartons of 0.096 m³ on paper, yet only 225 fit when stacked whole inside a 5.9 × 2.352 × 2.393 m interior.
| Carton | Container | By Volume Alone | Fit When Stacked | Payload Limit | Cartons per Box |
|---|---|---|---|---|---|
| 60 × 40 × 40 cm, 15 kg | 20 ft | 345.8 | 225 | 1,886 | 225 |
| 60 × 40 × 40 cm, 15 kg | 40 ft | 705.2 | 500 | 1,924 | 500 |
| 60 × 40 × 40 cm, 15 kg | 40 ft high cube | 795.8 | 600 | 1,912 | 600 |
| 40 × 30 × 30 cm, 40 kg | 20 ft | 922.2 | 686 | 707 | 686 |
| 40 × 30 × 30 cm, 40 kg | 40 ft | 1,880.6 | 1,470 | 721 | 721 |
| 40 × 30 × 30 cm, 40 kg | 40 ft high cube | 2,122.2 | 1,680 | 717 | 717 |
Heavy cartons hit the weight limit before the roof in any cubic meters calculator container plan, so check the payload as well as the space.
The 40 kg carton fills a 40 ft box to its 28,870 kg payload at 721 pieces, under half the 1,470 that fit by space, so a high cube adds nothing for that cargo.
The high cube's extra 305 mm of height pays off only when it fits one more whole layer. The 40 cm carton gets six layers instead of five, a 20% gain from 600 against 500 cartons for the same floor.
Cylinders, Tanks and Round Holes
A cylinder holds π × r² × h. A post hole 300 mm across and 1.2 m deep is π × 0.15² × 1.2 = 0.0848 m³, or 84.8 liters of concrete, about 204 kg at 2,403 kg/m³.
r is the radius, half the inside diameter, and h is the depth, both in meters. Use the inside size for tanks and forms, since wall thickness can take several percent off small round volumes.
| Round Job | Size | Cubic Meters | Liters | Concrete Weight |
|---|---|---|---|---|
| Sonotube pier | 12 in × 4 ft | 0.0890 | 89.0 | 213.8 kg |
| Post hole | 300 mm × 1.2 m | 0.0848 | 84.8 | 203.8 kg |
| Pier footing | 600 mm × 1 m | 0.2827 | 282.7 | 679.4 kg |
| Well ring | 1 m × 1 m | 0.7854 | 785.4 | -- |
| Water tank | 2 m × 3 m | 9.4248 | 9,424.8 | -- |
A square hole of the same width holds 27.3% more than a round one in cubic meters calculator math, since 4 ÷ π = 1.273. Ordering concrete for a 300 mm square hole when the auger cut a round one leaves 0.023 m³ over per hole.
A round tank's full volume in liters is the cubic meters calculator result times 1,000, so the 2 m × 3 m tank holds 9,425 liters of water and weighs 9.4 tonnes full.
Imperial and Liquid Units per Cubic Meter
One cubic meter holds 35.3147 cubic feet, 1.30795 cubic yards and 61,023.7 cubic inches. All follow from the exact 0.3048 m foot, so a cubic feet to cubic meters converter multiplies by 0.0283168 with no rounding beyond the digits shown.
| Unit | In 1 m³ | One Unit in m³ |
|---|---|---|
| Cubic feet | 35.3147 | 0.0283168 |
| Cubic yards | 1.30795 | 0.764555 |
| Cubic inches | 61,023.7 | 0.0000163871 |
| Liters | 1,000 | 0.001 |
| US gallons | 264.172 | 0.00378541 |
| Imperial gallons | 219.969 | 0.00454609 |
| US bushels | 28.3776 | 0.0352391 |
Sand and aggregate in India and nearby markets are often sold by the CFT, or cubic foot. A 100 CFT truckload is 2.832 m³, and 1 m³ is 35.31 CFT, the figure behind any cubic meters calculator India conversion.
Yards to cubic meters runs the other way in a cubic meters calculator conversion, multiplying each cubic yard by 0.764555.
A 10 cubic yard skip is 7.646 m³, so the yard sizes common in the US are about a quarter smaller than the same number of cubic meters. Box volumes in feet carry on in the Cubic Feet Calculator.
One Cubic Meter in Plain Terms
A cubic meter is easier to picture once it is tied to water, a tape and a load, and each answer below puts a number on it for everyday cubic meters calculator jobs.
How much is 1 cubic meter?
One cubic meter is a cube 1 m long, wide and high, about 3 ft 3 3/8 in on each side. It holds 1,000 liters, 264.17 US gallons or 35.31 cubic feet, and filled with water it weighs one metric tonne.
Why is 1 cubic meter 1000 liters?
A liter is one cubic decimeter, a cube 10 cm on each side. A meter is 10 decimeters, so a cubic meter holds 10 × 10 × 10 = 1,000 of those cubes, and 1 mL equals 1 cm³.
What is 1 cubic meter called?
One cubic meter is written m³ and called CBM in shipping. In liquid terms it is a kiloliter, and firewood sold by the cubic meter of stacked logs is called a stere, which includes the air between the pieces.
How do I convert meters to cubic meters?
A length in meters cannot become cubic meters on its own, because volume needs three sides. Multiply length, width and depth in meters, so 10 m of trench 0.45 m wide and 0.6 m deep is 2.7 m³.
How do I measure a cubic metre?
Measure the inside length, width and height in meters before any cubic meters calculator math, or in centimeters divided by 100. Take each side at its longest point for cartons and at the average depth for a dug hole or a heaped pile.
When to use cubic meter?
Use cubic meters for concrete and earthworks in metric countries, for sea and air freight worldwide and for water tanks. In the US, ready-mix and bulk soil are still sold by the cubic yard, at 0.7646 m³ each.