Fence stain calculator for gallons on privacy, picket, shadowbox or ranch fences, counting both sides, posts and rails, coats, label coverage and waste, then pails and cans to buy.
Measure the full run including gates; height is the board height above ground.
Pickets, Rails & Posts
Waste, Cans & Price
Fence Section Diagram
Stain by Coats and Sides
| Coats | One Side | Both Sides |
|---|---|---|
| 1 coat | 4.40 gal | 9.71 gal |
| 2 coats | 8.80 gal | 19.42 gal |
| 3 coats | 13.20 gal | 29.13 gal |
Stain by Coverage Rate
| Coverage | Stain Needed | To Buy | Cost |
|---|---|---|---|
| 125 sq ft/gal | 11.65 gal | 12.00 gal | $430.00 |
| 150 sq ft/gal | 9.71 gal | 10.00 gal | $350.00 |
| 200 sq ft/gal | 7.28 gal | 8.00 gal | $295.00 |
| 250 sq ft/gal | 5.83 gal | 6.00 gal | $215.00 |
| 300 sq ft/gal | 4.85 gal | 5.00 gal | $175.00 |
| 350 sq ft/gal | 4.16 gal | 5.00 gal | $175.00 |
Stain by Fence Style
| Fence Style | Area to Stain | Stain Needed | Cost |
|---|---|---|---|
| Solid Privacy | 1,324 sq ft | 9.71 gal | $350.00 |
| Board-on-Board | 1,501 sq ft | 11.01 gal | $430.00 |
| Spaced Picket | 1,130 sq ft | 8.28 gal | $335.00 |
| Shadowbox | 1,726 sq ft | 12.65 gal | $470.00 |
| Rail (Ranch) | 399 sq ft | 2.93 gal | $120.00 |
Step-by-Step Fence Stain Math
Fence Stain Calculator Gallons for a 100-Foot Privacy Fence
A 100 ft run of 6 ft solid privacy fence needs about 9.7 gallons for one coat on both sides at 150 sq ft per gallon with 10% waste. That buys as two 5-gallon pails, or $350 at $175 a pail.
A fence stain calculator estimate built on the common shortcut of length times height, doubled, then divided by 250 says 4.8 gallons. It is half the real order, since fence stain labels rate far below 250 and the back carries more wood.
G is gallons to buy, Af and Ab are the front and back areas in sq ft, n is the number of coats, C is the label coverage in sq ft per gallon, and w is the waste allowance in percent, the five numbers behind any fence stain calculator result.
For the 100 ft fence, (600 + 724) × 1 ÷ 150 × 1.10 gives 9.71 gallons, which works out to 10.3 ft of fence per gallon or about 0.75 gallon per 8 ft section between posts.
Measure the length with gates included, since gate boards take stain like any other section. For a yard you have not measured yet, the Rectangle Fence Perimeter Calculator turns side lengths into the run to feed any fence stain calculator estimate.
Label Coverage Runs 125 to 150, Not 250 to 350
Penetrating oil fence stains are rated near 125 to 150 sq ft per gallon on fence boards. The 250 to 350 figure quoted widely fits smooth, sealed surfaces, not rough or dry fence pickets.
The Ready Seal application instructions list 125 sq ft per gallon on a cedar fence and 150 on spruce, pine and treated pine fences, with 170 reserved for smooth pine siding.
The 1Deck Premium Fence Stain data sheet goes lower still, at 100 to 150 sq ft per gallon for two coats together, set by how porous the surface is and how it is applied.
Here is how a fence stain calculator order for the same 100 ft, 6 ft privacy fence, both sides and one coat with 10% waste, changes as the label rate rises. Prices assume $40 per gallon can and $175 per 5-gallon pail.
| Label Coverage | Stain Needed | Cheapest Buy | Cost |
|---|---|---|---|
| 125 sq ft/gal (cedar) | 11.65 gal | 2 pails + 2 cans | $430 |
| 150 sq ft/gal (pine, treated pine) | 9.71 gal | 2 pails | $350 |
| 200 sq ft/gal | 7.28 gal | 1 pail + 3 cans | $295 |
| 250 sq ft/gal | 5.83 gal | 1 pail + 1 can | $215 |
| 300 sq ft/gal | 4.85 gal | 1 pail | $175 |
| 350 sq ft/gal | 4.16 gal | 1 pail | $175 |
Using 300 in a fence stain calculator for a cedar fence that really takes 125 leaves you about 6.8 gallons short, which means a second trip and a later batch that may not match the first in color.
Does rough or old wood use more stain?
Yes, rough-sawn and weathered boards soak up more. Ready Seal rates rough cedar siding at 125 sq ft per gallon against 150 for smooth, and the cedar fence rate of 125 adds about 1.9 gallons to the 100 ft job.
Weathered wood is more porous, and the 1Deck sheet ties its rate to surface porosity. Run your fence stain calculator numbers at the low end of the label range for any fence older than a few seasons.
Back Sides Hold Every Post and Rail
The back of a solid privacy fence has 21% more surface than the front. The front is flat boards, 600 sq ft on a 100 ft by 6 ft run, while the back adds rail faces, rail edges and three sides of each post.
| Back Side Surface (100 ft × 6 ft) | Area |
|---|---|
| Board backs, full run | 600 sq ft |
| Hidden behind 3 rails (3.5 in faces) | -87.5 sq ft |
| Hidden behind 14 posts (3.5 in faces) | -24.5 sq ft |
| Rail faces and both edges (6.5 in per rail) | +162.5 sq ft |
| Three exposed faces of 14 posts | +73.5 sq ft |
| Back side total | 724 sq ft |
Posts at 8 ft spacing on 100 ft come to 14, one more than the 13 sections. Each post removed by wider spacing takes 3.5 sq ft off the back side, since 5.25 sq ft of exposed faces go and 1.75 sq ft of board back reappears.
Posts and rails make up 236 sq ft, or 18% of the 1,324 sq ft fence stain calculator total. Leaving them bare drops the order to 7.98 gallons and $295, with the framing left unprotected.
Should I stain one side or both sides of the fence?
Stain both sides when you can reach them, since the back holds all 236 sq ft of posts and rails. Front only on the 100 ft fence is 600 sq ft and 4.4 gallons, or one pail at $175, against 9.71 gallons for both.
A neighbor-facing back side is often skipped for access reasons. If yours faces your own yard, stain it, because it holds the framing that rots first and needs all 724 sq ft in the fence stain calculator estimate.
Doubling a measured one-side area misses that framing. On the 100 ft fence, 2 × 600 gives 1,200 sq ft, 124 sq ft or 9% short, and 8.8 gallons that buy as one pail and four cans at $335.
Shadowbox Takes Half Again the Stain of Spaced Pickets
Style alone swings a fence stain calculator order by a factor of four on one run. On the same 100 ft by 6 ft run with 5.5 in boards, both sides and one coat at 150, shadowbox needs 12.65 gallons against 8.28 for spaced pickets.
| Fence Style | Boards | Area, Both Sides | Stain | Cost |
|---|---|---|---|---|
| Solid privacy, boards butted | 219 | 1,324 sq ft | 9.71 gal | $350 |
| Board-on-board, 1 1/4 in overlap | 283 | 1,501 sq ft | 11.01 gal | $430 |
| Spaced picket, 2.5 in gaps | 150 | 1,130 sq ft | 8.28 gal | $335 |
| Shadowbox, 3.5 in gaps | 268 | 1,726 sq ft | 12.65 gal | $470 |
| 3-rail ranch, 1×6 boards | 39 | 399 sq ft | 2.93 gal | $120 |
Board-on-board with a 1 1/4 in overlap on each edge needs 283 boards instead of 219, and their 5/8 in edges add 177 sq ft. That lifts the fence stain calculator order by 1.3 gallons and costs $430 against $350 for butted boards.
A tighter 1 in overlap needs 267 boards and 10.93 gallons, which buys as two pails and one can at $390. The edge area, not the face area, is what the overlap changes, since the faces still cover 100 ft by 6 ft.
Shadowbox carries boards on both faces of the rails, so each side shows its own board faces plus the inner faces of the opposite row through the gaps. That totals 1.53 times the picket area and 1.30 times solid privacy.
Picket edges count too. Each 5/8 in thick picket has two edges the full height, which adds 94 sq ft on the 150 pickets above, split evenly between the two sides.
Board counts come from the board width plus the gap. For picket and board orders on the same run, the Fence Picket Calculator and Wood Fence Calculator use the same spacing.
Second Coats Depend on What the Wood Absorbs
One coat of a penetrating stain is enough on new smooth boards that will not take more, and two coats suit rough or weathered wood. Counting a second coat in a fence stain calculator doubles the 100 ft order to 19.42 gallons, four pails at $700.
| Coats | Front Only (600 sq ft) | Both Sides (1,324 sq ft) |
|---|---|---|
| 1 | 4.40 gal | 9.71 gal |
| 2 | 8.80 gal | 19.42 gal |
| 3 | 13.20 gal | 29.13 gal |
Ready Seal is meant as a two-coat stain but warns that new smooth-milled wood may refuse the second. Its test is a few drops an hour after coat one, wiped after 30 to 45 minutes. Pigment on the towel means stop at one coat.
Wet-on-damp stains change the math. The 1Deck rate of 100 to 150 sq ft per gallon covers both coats applied 20 to 30 minutes apart, so a two-coat count at 150 each would order up to twice what that product needs.
Because a refused second coat is common on new boards, buy for one coat plus the waste allowance, then add cans after the drop test rather than ordering the full two-coat fence stain calculator figure up front.
Gallons per 100 Feet at Four Heights
Solid privacy fence stained on both sides with one coat at 150 sq ft per gallon and 10% waste needs 6.66 gallons per 100 ft at 4 ft tall, rising to 12.76 gallons at 8 ft.
| Height | 100 ft | 150 ft | 200 ft |
|---|---|---|---|
| 4 ft | 6.66 gal | 9.97 gal | 13.28 gal |
| 5 ft | 8.18 gal | 12.25 gal | 16.32 gal |
| 6 ft | 9.71 gal | 14.54 gal | 19.37 gal |
| 8 ft | 12.76 gal | 19.11 gal | 25.46 gal |
Height does not scale a fence stain calculator estimate one for one. Rails stay fixed as a fence grows, so 4 ft to 8 ft takes 1.92 times the stain. For the boards and posts behind these runs, the Fence Calculator lists the materials.
How much stain do I need for 200 ft of fence?
A 200 ft, 6 ft privacy fence takes 19.37 gallons for one coat on both sides at 150, bought as four pails for $700. Front only is 1,200 sq ft and 8.8 gallons, one pail plus four cans at $335.
Cedar at 125 sq ft per gallon raises the both-sides fence stain calculator figure to 23.24 gallons, four pails and four cans at $860. Two full coats of that cedar job would need 46.48 gallons and $1,655.
Pails Beat Cans Once the Order Passes 4 Gallons
At $175 a pail and $40 a can, a 5-gallon pail costs the same as 4.375 cans. Any order above 4 gallons, which needs five cans at $200, is cheaper as one pail, even with stain left over.
The same rule applies to whatever is left after full pails. An 8.6 gallon order is cheapest as one pail plus four cans at $335, while 9.2 gallons flips to two pails at $350 because a fifth can would cost $375.
The $350 fence stain calculator cost for the 100 ft privacy job works out to $3.50 per foot of fence and $0.26 per sq ft stained, stain only. Sprayer rental, brushes, cleaner and labor sit on top of that figure.
Mix every container in a large bucket before you start, so pails from different batches blend to one color along the run. The 0.29 gallon left from the 100 ft job is about right for touching up gate edges later.
Moisture and Weather Before the First Coat
Label rates in a fence stain calculator estimate assume dry wood. Ready Seal asks for 12% moisture content or less, checked with a meter at corners and knots. In humid areas 14 to 15% is accepted, though the wood may then take only one coat.
New smooth-milled boards need a brightener and a rinse at 1,000 psi or less before staining, per Ready Seal, while rough-cut lumber needs only to be dry. Full cure takes up to 14 days.
The 1Deck sheet calls for surface temperatures from 45°F to 95°F, no rain within 12 hours and no direct sun on the boards. It also asks oily woods such as cedar to weather about a year before the first coat.
Decks, Brands and Liters
A few searches around fence staining reach past the fence itself, into decks, brand tools and metric cans. Each answer below uses the same coverage, coat and waste math as the fence stain calculator figures above.
How much stain for a 300 sq ft deck?
About 2.2 gallons for one coat at Ready Seal's 150 sq ft per gallon for a treated pine deck, with 10% waste, so three gallon cans at $120. Two coats need 4.4 gallons, one pail at $175.
Deck floors are only part of the job. Rails, balusters and stair stringers add area the floor size misses, which the Deck Stain Calculator counts separately.
What does coverage per gallon mean on a fence stain label?
Coverage is the area one gallon coats in a single pass on the stated surface, so a label rate of 150 means 150 sq ft of board face per gallon.
At that rate, 1,324 sq ft of fence takes 8.83 gallons before waste in a fence stain calculator count, or 0.73 gallon per 100 sq ft with 10% added.
How many liters of fence stain does a fence need?
The 100 ft by 6 ft privacy fence, 30.48 m by 1.83 m, needs about 36.8 L for one coat on both sides in a metric fence stain calculator estimate. A rate of 150 sq ft per gallon equals 3.68 m² per liter, and 125 equals 3.07 m² per liter.
Does Fence Armor have a stain calculator?
Yes. Fence Armor's version asks for wood species from treated yellow pine to ipe, wood condition and spray or brush, counts posts on 8 ft centers, and returns a product list for its EXPERT stain without printing coverage rates.