Vinyl fence cost calculator for a straight run, backyard or full lot: panel and post counts, gates, concrete bags, and the installed total and cost per foot from your local prices.
Enter one straight fence line and any gates; the gate openings are taken out of the panel count.
Posts, Gates & Concrete
Prices, Labor & Fees
Fence Layout Plan
Shopping List With Prices
| Item | Qty | Unit Price | Total |
|---|---|---|---|
| Vinyl panels | 20 | $120.00 | $2,400 |
| Line posts | 18 | $35.00 | $630 |
| End posts | 2 | $35.00 | $70 |
| Gate posts | 2 | $35.00 | $70 |
| Post caps | 22 | $5.00 | $110 |
| Walk gates | 1 | $400.00 | $400 |
| 50 lb concrete bags | 66 | $6.50 | $429 |
| Gravel base, 6 in per hole | 6.00 cu ft | Not priced | Not priced |
| Sales tax, 7% | 1 | $287.63 | $288 |
| Permit & delivery | 1 | $150.00 | $150 |
| Install labor | 150 ft | $12.00 / ft | $1,800 |
| Installed total | 150 ft | $42.31 / ft | $6,347 |
Vinyl Fence Cost by Length
| Straight Run | Panels | Posts | DIY + Fees | Installed | Per Foot |
|---|---|---|---|---|---|
| 20 ft | 2 | 4 | $1,089 | $1,329 | $66.47 / ft |
| 40 ft | 6 | 8 | $1,858 | $2,338 | $58.44 / ft |
| 60 ft | 8 | 10 | $2,242 | $2,962 | $49.36 / ft |
| 80 ft | 10 | 12 | $2,626 | $3,586 | $44.82 / ft |
| 100 ft | 12 | 14 | $3,010 | $4,210 | $42.10 / ft |
| 150 ft | 20 | 22 | $4,547 | $6,347 | $42.31 / ft |
| 200 ft | 26 | 28 | $5,699 | $8,099 | $40.50 / ft |
| 300 ft | 38 | 40 | $8,004 | $11,604 | $38.68 / ft |
| 500 ft | 62 | 64 | $12,613 | $18,613 | $37.23 / ft |
| 1,000 ft | 126 | 128 | $24,906 | $36,906 | $36.91 / ft |
Step-by-Step Fence Math
- Fence line = 150 ft; minus gates 4 ft = 146 ft of panels.
- Panels = each fence piece ÷ 8 ft, rounded up (each gate adds one more fence piece on its side) = 20 panels.
- Posts = 20 panels + 1 + 1 for gates = 22 posts and caps.
- Post length = 1.5 × 6 ft fence height = 9 ft, with 3 ft buried.
- Concrete per post = (π × 10 in² ÷ 4 - 5 in²) × 2.75 ft (buried depth less 3 in of soil on top) = 1.02 cu ft ÷ 0.375 cu ft per bag = 3 bags.
- Materials $4,109 + 7% tax $288 + fees $150 + labor $1,800 = $6,347.
- Result: $6,347 Installed.
How a Vinyl Fence Cost Calculator Builds a Quote
A vinyl fence cost calculator counts every part the fence needs, prices each one, then adds tax, fees and labor. The total is only as good as the part counts, so the panel and post math comes first.
These are the two counts every vinyl fence cost calculator starts from. P is the number of panels, L is the fence length, G is the total width of gate openings, and w is the panel width.
Each gate splits a side into two fence pieces, and each piece is rounded up on its own, so two gates can add a panel even on the same fence length.
N is the post count on a straight fence with two free ends, and g is the number of gates. A closed fence that returns to its start needs no extra end post, so the +1 drops away.
How do I estimate a vinyl fence?
Measure the fence line in feet, mark where each gate goes, and pick a panel width. Most vinyl panels are 8 ft on center. One install guide sold with Home Depot vinyl panels sets 5 × 5 posts 96 in on center, or 91 in clear between posts.
Then get local prices for the vinyl fence cost calculator: one panel, one post, one cap, a bag of concrete and each gate. A per-foot labor rate from an installer completes the estimate.
The same math works for a vinyl fence cost calculator in India or the Philippines. Enter lengths in meters and prices in rupees or pesos from a local supplier, and the panel, post and concrete counts stay the same.
How to calculate vinyl fence cost for a 150 ft fence?
Run a 150 ft straight fence with one 4 ft walk gate through the vinyl fence cost calculator. The gate leaves 146 ft of panels in two 73 ft pieces. Each piece takes 10 panels of 8 ft, so the fence needs 20 panels, 22 posts and 22 caps.
At $120 per panel, $35 per post, $5 per cap, $400 for the gate and 66 bags of concrete at $6.50, materials come to $4,109. Add 7% tax, $150 for permit and delivery and $12 per foot of labor, and the installed total is $6,347.
That works out to $42.31 per foot, with 69% of the money going to materials and tax. The 14 ft of panel left over after cutting the last panel in each piece is waste you still pay for.
What Does 100 Ft of Vinyl Fencing Cost?
At the vinyl fence cost calculator's example prices, a 100 ft vinyl privacy fence with one walk gate costs $4,210 installed, or $42.10 per foot. Your total moves with local panel and labor prices, so treat the table as the shape of the math, not a market rate.
| Fence Length | Panels | Posts | Installed, 10 in Holes | Per Foot | Installed, 15 in Holes | Per Foot |
|---|---|---|---|---|---|---|
| 20 ft | 2 | 4 | $1,329 | $66.47 | $1,469 | $73.43 |
| 40 ft | 6 | 8 | $2,338 | $58.44 | $2,616 | $65.40 |
| 60 ft | 8 | 10 | $2,962 | $49.36 | $3,310 | $55.16 |
| 80 ft | 10 | 12 | $3,586 | $44.82 | $4,003 | $50.04 |
| 100 ft | 12 | 14 | $4,210 | $42.10 | $4,697 | $46.97 |
| 150 ft | 20 | 22 | $6,347 | $42.31 | $7,112 | $47.41 |
| 200 ft | 26 | 28 | $8,099 | $40.50 | $9,073 | $45.36 |
| 300 ft | 38 | 40 | $11,604 | $38.68 | $12,995 | $43.32 |
| 1,000 ft | 126 | 128 | $36,906 | $36.91 | $41,357 | $41.36 |
Every row is a straight 6 ft privacy fence with one 4 ft walk gate, 7% tax, $150 in fees and $12 per foot of labor. The hole columns differ only in concrete, which is explained in the post section below.
How much does 20 ft of vinyl fencing cost?
A 20 ft run with a gate costs $1,329 at these prices, or $66.47 per foot. The gate, its two posts and the fixed fees are spread over very few feet, so short fences always cost the most per foot in any vinyl fence cost calculator.
How much does 200 linear feet of vinyl fence cost?
A 200 ft fence with one walk gate costs $8,099 installed, or $40.50 per foot, on 10 in holes. Quikrete's wider 15 in holes raise concrete from 84 bags to 224 and the total to $9,073.
How much does 1,000 feet of fence cost?
A 1,000 ft straight fence comes to $36,906 in the vinyl fence cost calculator at these prices. Per foot it comes close to the 300 ft fence, because fees and the gate barely register at that length and panels, posts and labor make up most of the bill.
Vinyl Fence Cost Calculator Per Foot
Cost per foot is the whole job divided by the fence length, gates included. It is the fair way to compare against a contractor who quotes per linear foot, as long as both figures include the same gates and fees.
This is how a vinyl fence pricing calculator turns one total into a per-foot rate. M is the material cost, t is the sales tax rate, F is permit and delivery, R is the labor and removal rate per foot, and L is the fence length.
Because F and the gates stay fixed whatever the length, the per-foot figure falls as the fence gets longer and levels off past about 300 ft.
Is it cheaper to build a fence yourself?
Building it yourself removes the labor line, and a vinyl fence installation cost calculator shows exactly how big that line is.
On the 150 ft example, labor is $1,800 of the $6,347 total, so a DIY build comes to $4,547 with tax and fees. You still need a post-hole auger, a level and help lifting panels.
Old fence removal adds its own per-foot rate. At $3 per foot, tearing out 150 ft adds $450, which is often worth paying for if the old posts are set in concrete.
How much should I pay for fencing?
Ask each installer for a per-foot price and a list of what it includes. Then run the same length, gates and hole size through the vinyl fence cost calculator, so a low quote that leaves out gates or concrete stands out.
A vinyl fence installation cost estimator is most useful as a check on the line items. A quote far below your DIY material total usually means thinner panels, fewer posts or missing gate hardware.
Gates and Layouts in a Vinyl Fence Cost Calculator
A gate replaces panels, but it adds two gate posts and its own price. On the 150 ft example, one 4 ft walk gate adds $684, and one 10 ft double drive gate adds $835 after the panel it replaces.
How much does a gate add to the total?
Adding a walk gate to a 150 ft fence costs $400 for the gate, one extra panel piece and two extra posts with caps and concrete. With tax, that is $684 at these prices, or about 12% of a $5,663 no-gate fence.
Leave the opening slightly wider than the gate. The Home Depot vinyl install guide sets gate openings 1-1/2 in wider than the gate, so hinges and latches have room to swing.
How many posts and panels does my fence need?
A straight fence needs one more post than panels, plus one per gate, and a vinyl fence estimator counts the gate posts separately from line posts.
A backyard fence that runs down both sides and across the back is L + 2W long, and each corner is shared by two sides, so it needs no extra post.
For a 100 × 60 ft backyard on three sides, the fence line is 220 ft. To size the line around a whole rectangular lot first, the Rectangle Fence Perimeter Calculator gives the perimeter, and the Fence Calculator handles posts and rails for any fence type.
A budget can also set the length. With $8,000 to spend and the example prices, the vinyl fence cost calculator works backward to the longest fence that fits, which is useful before you commit to fencing the whole lot.
Vinyl Fence Post Depth and Concrete
Concrete is the line that swings most between estimates, even inside the same vinyl fence cost calculator. Quikrete's post-setting guide sizes each hole at 3 times the post width and 1/3 of the overall post length deep, plus 6 in of gravel at the bottom.
For a 6 ft fence on 9 ft posts, that rule gives 3 ft buried and a 15 in hole for a 5 × 5 post. Quikrete fills to 3 to 4 in below grade, so each hole takes about 2.90 cu ft, or 8 bags of 50 lb fast-setting mix at 0.375 cu ft per bag.
How deep should fence posts be set?
Set posts about one third of their overall length in the ground, plus 6 in of gravel. The Home Depot vinyl guide lists at least 26 in for 8 ft posts and 38 in for 9 ft posts. In frost areas, holes must reach below the frost line.
Vinyl install guides call for smaller holes than Quikrete's general rule. One asks for a 10 in minimum hole for a standard 5 × 5 post, and a post kit sold at Home Depot asks for 12 in, which changes the concrete bill a lot.
| Hole Diameter | Concrete per 5 × 5 Post, 33 in Fill | 50 lb Bags per Post | Bags for 22 Posts | Cost at $6.50 a Bag |
|---|---|---|---|---|
| 10 in | 1.02 cu ft | 3 | 66 | $429 |
| 12 in | 1.68 cu ft | 5 | 110 | $715 |
| 15 in | 2.90 cu ft | 8 | 176 | $1,144 |
Give the vinyl fence cost calculator the hole size your panel maker prints in its install guide. For hole depth by frost line and soil, the Fence Post Depth Calculator works out depth and concrete per post. Call 811 a few days before digging so buried lines get marked.
How to Choose a Vinyl Fence
Pick the height first, because the vinyl fence cost calculator uses it to set the post length and the hole depth. A 6 ft privacy fence on 9 ft posts buries 3 ft, while a 4 ft picket fence on 6 ft posts buries 2 ft and uses far less concrete per post.
Then compare panels on price per foot of fence, not price per panel, which is how a vinyl fence price estimator ranks them. A $120 panel that covers 8 ft costs $15 per foot, while a $95 panel that covers 6 ft costs $15.83 per foot and also needs more posts.
Wider panels mean fewer posts, caps and holes, which the vinyl fence cost calculator shows in the post count. On 150 ft with one gate, 6 ft panels need 26 panels and 28 posts, against 20 panels and 22 posts at 8 ft.
Is it cheaper to do a vinyl or wood fence?
A vinyl fence cost calculator can only price vinyl, so compare the two with your own local quotes, because panel prices vary widely by region and style. Run the same length and gates through the Wood Fence Calculator and set the two totals side by side.
Count the upkeep too. Wood needs stain or paint every few years, while vinyl is usually only washed, so a wood fence that is cheaper to build can cost more over its life.
Does a sloped or rocky yard cost more?
Yes, in parts and labor. Vinyl panels stay level and step down the grade, so each panel drops by the slope times the panel width. That step leaves a gap under the low end of every panel and makes the posts longer.
| Ground Slope | Step per 8 ft Panel | Post Length, 6 ft Fence |
|---|---|---|
| 0% | None | 9 ft |
| 5% | 4.8 in | 9.4 ft |
| 10% | 9.6 in | 9.8 ft |
| 15% | 14.4 in | 10.2 ft |
| 20% | 19.2 in | 10.6 ft |
Set the slope in the vinyl fence cost calculator, then price the longer post when you enter the post cost, since a 10 ft post costs more than a 9 ft one. Shorter panels cut the step, so 6 ft panels on a steep yard leave smaller gaps than 8 ft panels.
Rocky ground slows every hole, so ask whether the labor rate assumes clear digging or adds a charge when the auger hits stone.
Do I need a permit to build a fence?
Many towns require one, and most limit height near property lines and streets. Permit fees vary by town, so add yours to the permit and delivery line before trusting any total from a vinyl fencing cost calculator.