Fresnel Zone Calculator

Updated

Fresnel zone calculator for point-to-point radio links: zone radius anywhere on the path, 60% clearance, Earth bulge, minimum antenna height and loss from any obstacle on the beam.

Fresnel Zone Link Setup

Enter the antenna distance and frequency; d1 gives the Fresnel radius at any point on the path.

n
Show Results In
Clearance & Earth Curve60% Clear · k 1.3333
% of F1
k
25.91 ft Fresnel Zone Radius
Exact 25.9141 ft · 7.899 m · Zone 1 at the Midpoint
25.39 ft Radius at Your Point
60% Clear Radius There15.23 ft
Earth Bulge There1.080 ft
Radius anywhere on the path: r = √(n·λ·d1·d2 / D); it shrinks toward each antenna.
15.55 ft 60% Clear at Midpoint
80% Clear at Midpoint20.73 ft
Zone 1 Diameter (Midpoint)51.83 ft
Most links keep 60% of the first zone open; 80% adds margin for trees and growth.
16.67 ft Min Antenna Height
Earth Bulge at Midpoint1.125 ft
For 100% Zone 1 Clear27.04 ft
Equal antenna heights over flat ground, adding Earth bulge to the clear radius.
121.4 dB Free-Space Path Loss
Wavelength (λ)2.03 in
Loss if Obstacle Grazes Beam+6.0 dB
Path loss in open space; anything that touches the beam line costs about 6 dB more.
Fresnel Zone Path ProfileHeights Exaggerated · 3.000 mi
A 16.67 ftB 16.67 ftZone 1 Max 25.91 ft · Dashed = 60% ClearGround with Earth Bulge (k 1.3333) · 3.000 mi Path
Fresnel Radius Along the Path9 Points · 3.000 mi
PointFrom AZone 1 Radius60% ClearEarth BulgeMin Beam Height
10% from A0.3000 mi15.55 ft9.329 ft4.86 in9.734 ft
20% from A0.6000 mi20.73 ft12.44 ft8.64 in13.16 ft
30% from A0.9000 mi23.75 ft14.25 ft11.3 in15.20 ft
40% from A1.200 mi25.39 ft15.23 ft1.080 ft16.31 ft
Midpoint1.500 mi25.91 ft15.55 ft1.125 ft16.67 ft
60% from A1.800 mi25.39 ft15.23 ft1.080 ft16.31 ft
70% from A2.100 mi23.75 ft14.25 ft11.3 in15.20 ft
80% from A2.400 mi20.73 ft12.44 ft8.64 in13.16 ft
90% from A2.700 mi15.55 ft9.329 ft4.86 in9.734 ft
Fresnel Radius by FrequencyOver 3.000 mi
FrequencyWavelengthZone 1 Max60% ClearMin Antenna HeightPath Loss
900 MHz1.09 ft65.79 ft39.47 ft40.60 ft105.2 dB
2.4 GHz4.92 in40.29 ft24.17 ft25.30 ft113.7 dB
3.65 GHz3.23 in32.67 ft19.60 ft20.73 ft117.4 dB
5.8 GHz2.03 in25.91 ft15.55 ft16.67 ft121.4 dB
6.175 GHz1.91 in25.11 ft15.07 ft16.19 ft121.9 dB
11 GHz1.07 in18.82 ft11.29 ft12.42 ft127.0 dB
18 GHz0.656 in14.71 ft8.826 ft9.951 ft131.2 dB
24 GHz0.492 in12.74 ft7.644 ft8.769 ft133.7 dB
60 GHz0.197 in8.057 ft4.834 ft5.960 ft141.7 dB
80 GHz0.148 in6.978 ft4.187 ft5.312 ft144.2 dB
Step-by-Step Math8 Steps
1. Wavelengthλ = 299.792458 / 5,800 MHz = 0.05168835 m
2. Widest Radiusr = √(1 × 0.05168835 × 4,828.032 / 4) = 7.898624 m = 25.9141 ft
3. Radius at Pointr = √(1 × 0.05168835 × 1,931.2128 × 2,896.8192 / 4,828.032) = 7.739039 m = 25.3905 ft
4. Clear Radius0.6 × 7.898624 = 4.739174 m = 15.5485 ft
5. Earth Bulgeh = 2,414.016 × 2,414.016 / (2 × 1.3333 × 6,371,000) = 0.3430163 m = 1.12538 ft
6. Min Antenna Height0.3430163 + 4.739174 = 5.082191 m = 16.6739 ft
7. Free-Space Path Loss20 log(4π × 4,828.032 / 0.05168835) = 121.39 dB
8. Result25.91 ft Fresnel Zone Radius
Keep 15.55 ft Clear Around the Beam at Midpoint
Over flat ground both antennas need about 16.67 ft. Trees or roofs inside the 60% radius cause fading; an obstacle touching the beam costs about 6 dB.

Fresnel Zone Calculator Math: Radius Anywhere on the Path

The first Fresnel zone on a 3 mi (4.83 km) link at 5.8 GHz is 25.91 ft (7.90 m) wide in radius at the midpoint. It is an ellipsoid wrapped around the straight beam line, thin at each antenna and fattest halfway along.

Radio energy does not travel as a thin ray. Paths that bend out to the edge of zone 1 arrive at most half a wavelength late and still add to the direct signal.

An obstacle inside that ellipsoid therefore weakens the link even when the far antenna is in plain sight, which is why visual line of sight is not radio line of sight.

Here rn is the radius of zone n, lambda is the wavelength (299.792458 / f in MHz gives meters), and d1 and d2 are the distances from the point to each antenna. All lengths share one unit.

The product d1 x d2 peaks when both distances are equal, which is why the radius is widest at the midpoint, where a Fresnel zone calculator reading is usually quoted.

There the formula shrinks to the square root of lambda x D / 4, where D is the full path length and each distance equals D / 2.

For a hand check of a Fresnel zone calculator figure, r1 comes out in meters with distances in km and f in GHz.

For feet with miles, the constant becomes 72.06, and at the midpoint the two forms reduce to 8.657 x the square root of D / f and 36.03 x the square root of D / f.

Many references round the metric constant to 17.32, which assumes light travels at exactly 300,000 km/s. The NIST value of c gives 17.31, a 0.03% difference that no antenna mount will notice.

Point on a 3 mi, 5.8 GHz pathZone 1 radius60% clear radiusZone 2 radius
10% from either end15.55 ft (4.74 m)9.33 ft21.99 ft
25% from either end22.44 ft (6.84 m)13.47 ft31.74 ft
40% from either end25.39 ft (7.74 m)15.23 ft35.91 ft
Midpoint25.91 ft (7.90 m)15.55 ft36.65 ft

The zone is symmetric, so any Fresnel zone calculator radius 10% from either antenna is the same. Even 10% out, it still holds 60% of its midpoint width, which is why a roof edge close to one mast can still clip the beam.

Frequency and Distance Set the Zone Size

Doubling the frequency cuts the radius by about 29%, and doubling the distance grows it by about 41%.

Both follow from the square root in the Fresnel zone calculator formula, so a 2.4 GHz link needs about 1.55 times the clearance of a 5.8 GHz link over the same path.

FrequencyWavelength1 km path5 km path10 km path30 km path
900 MHz33.31 cm9.13 m (29.9 ft)20.41 m (66.9 ft)28.86 m (94.7 ft)49.98 m (164.0 ft)
2.4 GHz12.49 cm5.59 m (18.3 ft)12.50 m (41.0 ft)17.67 m (58.0 ft)30.61 m (100.4 ft)
5.8 GHz5.17 cm3.59 m (11.8 ft)8.04 m (26.4 ft)11.37 m (37.3 ft)19.69 m (64.6 ft)
11 GHz2.73 cm2.61 m (8.6 ft)5.84 m (19.1 ft)8.25 m (27.1 ft)14.30 m (46.9 ft)
24 GHz1.25 cm1.77 m (5.8 ft)3.95 m (13.0 ft)5.59 m (18.3 ft)9.68 m (31.8 ft)
60 GHz0.50 cm1.12 m (3.7 ft)2.50 m (8.2 ft)3.53 m (11.6 ft)6.12 m (20.1 ft)
80 GHz0.37 cm0.97 m (3.2 ft)2.16 m (7.1 ft)3.06 m (10.0 ft)5.30 m (17.4 ft)

Every value is the Fresnel zone calculator radius for zone 1 at the midpoint. The 1 km column matches the figures quoted most often online: 5.59 m at 2.4 GHz, 3.87 m at 5 GHz and 3.53 m at 6 GHz.

Millimeter-wave 5G and E-band links get a small Fresnel zone calculator radius, often under a meter on short urban hops.

A 60 GHz hop of 500 m needs only 0.79 m of midpoint radius, so a lamp post or a wall a meter off the beam line stays outside zone 1, while rain fade, not clearance, sets the reach.

Low frequencies pay the opposite price. A 900 MHz Fresnel zone calculator result over 10 km is 28.86 m, taller than most masts, which is why long sub-GHz links run from hilltops and towers rather than rooftops.

Clearance Targets: 60%, 80% or the Full First Zone

Keep at least 60% of the zone 1 radius free of obstacles, the usual Fresnel zone clearance target. ITU-R P.530 gives 60% clearance above ground as the condition for free-space propagation on a line-of-sight path.

The 60% figure comes straight from knife-edge diffraction. The loss is near zero until an obstacle edge reaches about 55% of the radius, then rises fast, so 60% is the smallest clearance that still behaves like open space.

Here c is the clearance from the obstacle top up to the beam line, negative when the obstacle sits above the beam, and r1 is the zone 1 radius at that point. The dimensionless v feeds the loss formula below.

J(v) is the extra loss in dB on top of free-space path loss, from ITU-R P.526. It applies for v above -0.78, and below that the loss is taken as 0 dB.

Clearance (share of r1)vDiffraction loss
100% clear-1.4140 dB
80% clear-1.1310 dB
60% clear-0.8490 dB
40% clear-0.5661.48 dB
20% clear-0.2833.65 dB
Edge on the beam line06.03 dB
20% blocked0.2838.48 dB
50% blocked0.70711.89 dB
100% blocked1.41416.34 dB

The table answers the line-of-sight question directly: an obstacle that just touches the beam costs 6 dB, a quarter of the received power. Add that figure to a link budget calculator margin before deciding a mast is tall enough.

The 80% target in vendor guides adds room for trees that grow and for refraction that bends the beam toward the ground. On a 3 mi, 5.8 GHz path, moving from 60% to 80% raises the clear radius from 15.55 ft to 20.73 ft at the midpoint.

Licensed microwave links follow a stricter method. ITU-R P.530 sizes antennas for 1.0 F1 over the highest obstacle at the median k of 4/3, and a Fresnel zone calculator run at 100% covers that step.

The standard then checks 0.0 F1 for an isolated obstacle or 0.3 F1 for an extended one, both at the low k exceeded 99.9% of the time.

The same standard asks for 0.6 F1 at low k on tropical paths longer than about 30 km, and adds obstacle-height accuracy to the clearance above about 13 GHz.

Earth Bulge, Refraction and Antenna Height

Earth curvature becomes part of the Fresnel zone calculator clearance on long links. At 5.8 GHz, the bulge is 1% of the needed antenna height on a 1 km path, 18% at 10 km and 53% at 30 km, so short Wi-Fi hops can ignore it and backhaul links cannot.

Here h is the height of the ground bulge above the chord between the two antenna bases, d1 and d2 are the distances to each end, Re is the Earth radius of 6,371 km, and k is the effective-Earth factor for refraction.

Standard air bends radio waves slightly downward, which makes the Earth look flatter. ITU-R P.530 uses k = 4/3 as the median when no local data exist, giving an effective radius near 8,500 km and a midpoint bulge of D2 / 67.96 m, with D in km.

The imperial shortcut at k = 4/3 is D2 / 8 in feet with D in miles, so a 3 mi path bulges 1.13 ft at the middle. Geometric line of sight with no refraction (k = 1) gives D2 / 6 instead, one third more.

Path at 5.8 GHzZone 1 radiusBulge, k = 4/3Bulge, k = 2/3Antenna height, 60% clearAntenna height, 100% clear
1 km3.59 m0.01 m0.03 m2.17 m (7.1 ft)3.61 m (11.8 ft)
5 km8.04 m0.37 m0.74 m5.19 m (17.0 ft)8.41 m (27.6 ft)
10 km11.37 m1.47 m2.94 m8.29 m (27.2 ft)12.84 m (42.1 ft)
20 km16.08 m5.89 m11.77 m15.53 m (51.0 ft)21.96 m (72.1 ft)
30 km19.69 m13.24 m26.49 m25.06 m (82.2 ft)32.93 m (108.0 ft)
50 km25.42 m36.79 m73.58 m52.04 m (170.7 ft)62.21 m (204.1 ft)

Heights assume equal masts over flat ground at k = 4/3, with each antenna at bulge plus the clear radius. Past about 28 km the bulge outgrows the 60% radius, so the curvature, not the Fresnel zone, drives tower cost.

A k of 2/3 doubles the 4/3 bulge and stands in for sub-refraction on cold, humid mornings. On a 30 km path that adds 13.24 m to the obstacle profile, which is why long links get a second Fresnel zone calculator check at a low k as well as at 4/3.

Level terrain sits behind every flat-ground Fresnel zone antenna height calculator answer, so hills and valleys need their own correction.

For real ground, read the elevation of each site and of the highest point between them from a terrain profile in Google Earth or a maps tool, all from the same datum such as sea level.

Obstacle Height Limits Along the Path

The highest obstacle a link can tolerate is the beam height at that point, minus the Earth bulge, minus 60% of the zone 1 radius there.

Where the obstacle stands changes the Fresnel zone calculator answer, because both the radius and the beam height vary along the path.

Here HA and HB are the antenna tops, each ground elevation plus mast height, eO is the ground elevation at the obstacle, d1 is its distance from antenna A, and D is the path length.

The last two terms are the Earth bulge and 60% of the zone 1 radius, both taken at d1. Over flat ground all three elevations are 0, and the antenna tops are simply the mast heights.

Take a 3 mi, 5.8 GHz Fresnel zone clearance case with antennas at 40 ft and 30 ft and a 25 ft tree line 1.2 mi from the taller mast. The beam passes at 36.00 ft, the bulge adds 1.08 ft, and the zone 1 radius there is 25.39 ft.

That leaves 9.92 ft of clearance, only 39% of zone 1, for about 1.57 dB of diffraction loss. The tree line would need to stay under 19.69 ft, or both masts need 5.31 ft more to reach the 60% target.

Raising only one mast also works in a Fresnel zone calculator plan, but it costs more height. Holding A at 40 ft, B must reach 43.29 ft, and holding B at 30 ft, A must reach 48.86 ft, since lifting the far mast moves the beam less at the obstacle.

A shortcut that subtracts 0.6 r1 from the antenna height gives the wrong limit once the beam slopes between masts of different height.

Using the 40 ft mast, it allows a 24.77 ft obstacle, yet a 25 ft tree line here leaves only 39% clear, because the beam slopes down toward the 30 ft mast and the bulge lifts the ground.

Move the same 25 ft tree line to 0.3 mi from the 40 ft mast and the picture flips. The radius there is 15.55 ft and the beam sits at 39.00 ft, so the clearance reaches 87% of zone 1 with no added loss and no mast change.

Terrain shifts a Fresnel zone calculator result more than any mast change. Put the same masts on ground at 500 ft (A) and 480 ft (B) with the tree line on ground at 470 ft, and the beam passes 58.00 ft above the trees' base, 126% clear of zone 1.

Raise the ground under the trees to 490 ft instead, and the beam sits only 38.00 ft above it. Clearance drops to 47%, the trees must stay under 21.69 ft, and both masts need 3.31 ft more to reach 60%.

A rooftop-to-rooftop Wi-Fi bridge shows the same Fresnel zone calculator math at small scale. On a 2 km, 5.8 GHz hop with roofs at 15 m and 12 m and an 11 m tree 0.8 km from the higher roof, the clearance is 2.74 m, or 55% of the 4.98 m radius.

That shortfall costs only 0.01 dB, and raising both radios 0.25 m reaches 60%. The same tree 0.2 km from the higher roof sits at 121% clearance, so for short hops the radio position on the roof often matters more than mast height.

Fresnel zone calculator clearance does not change the free-space loss itself. The 2 km hop still carries 113.7 dB of path loss, and the 3 mi link 121.4 dB, figures a free space path loss calculator confirms before any obstruction loss is added.

Beyond Zone 1: Higher Zones, Antennas and Receive-Only Links

Three questions come up once the first zone is clear. Each answer below uses the same 3 mi, 5.8 GHz Fresnel zone calculator path, where zone 1 reaches 25.91 ft at the midpoint.

What is the second Fresnel zone used for?

The second Fresnel zone marks where reflections arrive between one half and one full wavelength late and tend to cancel the direct signal.

Its midpoint radius is the square root of 2 times zone 1, or 36.65 ft on the 3 mi, 5.8 GHz path, and zone 3 is 44.88 ft.

Point-to-point planning rarely asks a Fresnel zone calculator for zone 2 clearance. An obstacle that reaches into zones 2 or 3 but stays out of zone 1 causes little steady loss.

A flat reflecting surface such as water or a parking lot at that depth can still produce deep fades, so engineers shift antenna height to move the reflection point.

Can directional antennas reduce the required Fresnel zone clearance?

Antenna gain does not shrink the Fresnel zone, because the radius depends only on wavelength and path geometry.

A 30 dBi dish and a 10 dBi panel on the same 3 mi, 5.8 GHz path get the same Fresnel zone calculator clearance, 15.55 ft of clear radius at the midpoint.

A narrow beam does help in other ways. It picks up less energy reflected from the ground and nearby walls, and its extra gain buys fade margin, so a partly obstructed path may still close, though the diffraction loss in dB stays the same.

Does the Fresnel zone calculation change for receive-only links?

The calculation stays the same for a receive-only link, such as a TV or a telemetry receiver. Radio paths are reciprocal, so the zone 1 radius depends only on the frequency and the distances, not on which end transmits.

Any Fresnel zone calculator result therefore applies in both directions. A receive-only path at 5.8 GHz over 3 mi still needs 15.55 ft of clear radius at the midpoint and loses 6 dB if an obstacle edge touches the beam line.