Pea Gravel Calculator

Updated

Pea Gravel Calculator for paths, patios, driveways, circles and tree rings, giving cubic yards, tons, bags, coverage per ton, edging length, and bulk or bagged cost at every depth.

Pea Gravel Setup

Measure the area to cover and the finished gravel depth.

Gravel Weight and Waste2,727 lb/cu yd, no waste

Tested 3/8 in pea gravel weighs about 101 lb per cu ft dry. Wet gravel weighs more.

lb/cu yd
%
Bags and Prices0.5 cu ft bags, $45/ton bulk

Store bags usually hold 0.5 cu ft. Compare bulk delivery with bagged price.

/bag
Pea Gravel Needed
1.85 cu yd Pea Gravel
Spread 3 in deep, no waste added
2.53 tons Pea Gravel
One Ton Covers79.2 sq ft
One Cubic Yard Weighs1.36 tons
Bulk pea gravel is sold by the ton or cubic yard. One ton covers less area as the layer gets deeper, so check it at your depth.
100 Bags of Pea Gravel
Each Bag Weighs50.5 lb
Bags per Cubic Yard54.0 bags
Store bags of pea gravel are sold by volume or weight. The bag count rounds up to whole bags, so you never come up short.
108 sq ft per Cubic Yard
Edging Length60 ft
Volume in Cubic Feet50.00 cu ft
Each cubic yard spreads over less ground at greater depth. Edging along the full outside edge keeps the stones from drifting.
$113.63 Bulk Pea Gravel
Bulk Cost per Sq Ft$0.57
Bagged Instead$550.00
Material only, from your bulk and bagged prices. Delivery fees, landscape fabric, edging and labor are extra and vary by supplier.
Depth Suits a Patio or Walkway
3 in of pea gravel is within the 2 to 3 in usually used for patios and walkways. Edging along the 60 ft outside edge keeps the stones in place.
Pea Gravel by Areaat your depth
AreaPea GravelWeightBags
10 × 10 ft0.93 cu yd1.26 tons50 bags
12 × 12 ft1.33 cu yd1.82 tons72 bags
200 sq ft1.85 cu yd2.53 tons100 bags
1,000 sq ft9.26 cu yd12.63 tons500 bags
Step-by-Step Mathwith your numbers
StepMathResult
1. Area20 ft × 10 ft200.00 sq ft
2. Pea gravel volume200 sq ft × 3 in ÷ 12 ÷ 271.85 cu yd
3. Weight1.8519 cu yd × 2,727 lb ÷ 2,0002.53 tons
4. Bags50 cu ft ÷ 0.5 cu ft, rounded up100 bags
5. One ton covers2,000 lb ÷ 101 lb/cu ft ÷ (3 in ÷ 12)79.2 sq ft
6. One cu yd covers27 cu ft ÷ (3 in ÷ 12)108 sq ft
7. Edging length2 × (20 + 10) ft60 ft
8. Bulk cost2.525 tons × $45$113.63
9. Bulk cost per sq ft$113.625 ÷ 200 sq ft$0.57
10. Bagged cost100 bags × $5.5$550.00

Yards, Tons and Bags From a Pea Gravel Calculator

A 10 × 30 ft path at 2 in deep takes 1.85 cu yd of pea gravel, about 2.53 tons or 100 bags of 0.5 cu ft. A 3 in layer on the same path raises that to 2.78 cu yd and 150 bags.

The pea gravel calculator figures below use 101 lb per cu ft, or 2,727 lb per cu yd. That matches the Quikrete All-Purpose Gravel listing, which yields about 0.5 cu ft per 50 lb bag.

AreaDepthCubic YardsCubic FeetUS Tons0.5 cu ft Bags
12 × 12 ft patio2 in0.8924.001.2148
12 × 12 ft patio3 in1.3336.001.8272
10 × 30 ft path2 in1.8550.002.53100
10 × 30 ft path3 in2.7875.003.79150
20 × 20 ft area2 in2.4766.673.37134
20 × 20 ft area3 in3.70100.005.05200

No waste is built into these pea gravel calculator numbers. Add 5 to 10% when the edges are soft or the ground dips, because loose stone spreads past any line you mark.

Depth drives the order more than area does. Going from 2 to 3 in adds half again as much stone, so settle the depth before any pea gravel calculator square feet figure goes to the yard.

Depth by Use for Paths, Driveways, Drainage and Play

Patios and walkways usually take 2 to 3 in of pea gravel, driveways 3 to 4 in, and drainage beds 6 in or more. Playgrounds need far more, 9 in once compressed, so the use sets any pea gravel calculator quantity per 100 sq ft.

UseDepthCubic Yards per 100 sq ftTons per 100 sq ftBags per 100 sq ft
Patio or walkway2 in0.620.8434
Patio or walkway3 in0.931.2650
Driveway4 in1.231.6867
Drainage bed6 in1.852.53100
Playground, compressed9 in2.783.79150
Playground, initial fill12 in3.705.05200

The playground rows come from public health guidance, not habit. NDSU Extension's playground safety guide cites the CPSC figure that 9 in of pea gravel protects a fall from 5 ft.

The Iowa Department of Public Health advises a 12 in initial fill, since loose fill compresses by at least 25%, and topping it up whenever it drops below 9 in. It also flags pea gravel as a choking hazard for children under 3.

The 6 to 8 in often quoted for play areas falls short of that. For taller equipment or younger children, a playground mulch calculator sizes wood surfacing for comparison.

A pea gravel calculator for driveway work stops at the top layer. Round stones roll under tires, so a 12 × 40 ft driveway needs its 5.93 cu yd of pea gravel at 4 in over a compacted road base layer.

Square Feet to Cubic Yards and Tons by Hand

To calculate pea gravel, multiply length by width for square feet, multiply by the depth in inches, and divide by 324 for cubic yards. At 101 lb per cu ft, each cubic yard weighs 1.36 US tons.

V is pea gravel in cubic yards, L and W are length and width in feet, and d is depth in inches. The 324 is 12 × 27, which converts inches to feet and cubic feet to cubic yards in one step.

T is weight in US tons and w is the gravel weight in lb per cu yd. At 2,727 lb, one ton of pea gravel is 0.73 cu yd, or 19.8 cu ft of stone.

B is the bag count, rounded up, and b is the bag size in cubic feet. A cubic yard holds 54 bags of 0.5 cu ft, and each of those bags weighs about 50.5 lb. Round up any pea gravel calculator bags count, since stores sell whole bags.

For a 14 × 18 ft patio at 3 in, the pea gravel calculator cubic yards math runs 252 × 3 ÷ 324 = 2.33 cu yd. That is 63 cu ft, 3.18 tons, or 126 bags.

Coverage per yard is the same math backward. One cubic yard covers 324 sq ft at 1 in, 162 sq ft at 2 in and 108 sq ft at 3 in, which is the fastest pea gravel coverage calculator check on a quote.

Weight per Cubic Foot Changes the Tons

The same 1.85 cu yd of pea gravel weighs between 2.40 and 2.79 tons, depending on the weight figure used. Top-ranking tools use anywhere from 96 to 111.6 lb per cu ft, a 16% spread.

Weight per cu ftWeight per cu ydMetric DensityTons for 1.85 cu yd0.5 cu ft Bags
96 lb2,592 lb1,538 kg/m³2.40100
101 lb2,727 lb1,618 kg/m³2.53100
103.6 lb2,798 lb1,660 kg/m³2.59100
111.6 lb3,013 lb1,788 kg/m³2.79100

Bag counts do not move because bags are sold by volume. Bulk yards weigh the truck, so the weight behind a pea gravel calculator tons figure sets what you pay per ton.

Standard pea gravel is about 3/8 in. A 3/8 pea gravel calculator figure of 101 lb per cu ft sits within 1% of the 100 lb per cu ft implied by a 50 lb bag yielding 0.5 cu ft.

Wet stone weighs more than dry. For a pea gravel calculator by weight figure that matches the scale ticket, ask the yard what one cubic yard of its washed stock weighs.

Round Beds and Tree Rings

A 10 ft circle at 3 in deep takes 0.73 cu yd of pea gravel, about 0.99 tons or 40 bags. A ring 8 ft across around a 3 ft tree well takes 0.40 cu yd and 22 bags.

ShapeGravel AreaCubic Yards (3 in)US Tons0.5 cu ft BagsEdging Length
8 ft circle50.27 sq ft0.470.632625.13 ft
12 ft circle113.10 sq ft1.051.435737.70 ft
14 ft circle153.94 sq ft1.431.947743.98 ft
6 ft ring, 2 ft center25.13 sq ft0.230.321325.13 ft
8 ft ring, 3 ft center43.20 sq ft0.400.552234.56 ft
12 ft ring, 4 ft center100.53 sq ft0.931.275150.27 ft

A is the ring area in square feet, D is the outer diameter and d is the open center, both in feet. Set d to 0 for a full circle, and edging for a ring runs both edges, pi × (D + d).

A pea gravel calculator circle figure that ignores the center overorders. The 8 ft ring needs 14% less stone than an 8 ft circle, because the tree well stays open.

Pea Gravel Price per Ton, Yard and Bag

At $45 a ton, bulk pea gravel costs $61.36 per cu yd. Bags at $5.50 for 0.5 cu ft cost $297 per cu yd, close to five times as much.

ProjectDepthBulk at $45 per TonBulk per Sq FtBagged at $5.50 per Bag
12 × 12 ft patio3 in$81.81$0.57$396.00
20 × 20 ft area2 in$151.50$0.38$737.00
10 × 30 ft path3 in$170.44$0.57$825.00
12 × 40 ft driveway4 in$363.60$0.76$1,760.00

Pea gravel is not expensive in bulk. Pea gravel price per ton varies by region and delivery distance, so swap in your yard's rate, and treat the delivery fee as the cost that decides small jobs.

Pea gravel calculator Home Depot and Lowe's searches usually end at 0.5 cu ft bags of about 50 lb, the size behind the bag prices above.

Bags suit a small bed of a few bags, while anything near a cubic yard is cheaper in bulk. Price any pea gravel calculator yards figure both ways before ordering.

Metric Orders in Tonnes and Cubic Meters

A 10 m² path at 50 mm deep takes 0.50 m³ of pea gravel, about 0.81 tonnes or 33 bags of 25 kg. At 2,727 lb per cu yd, pea gravel works out to 1,618 kg/m³.

AreaDepthCubic MetersTonnes25 kg Bags
10 m²50 mm0.500.8133
10 m²75 mm0.751.2149
20 m²50 mm1.001.6265
20 m²75 mm1.502.4398
50 m²50 mm2.504.04162
50 m²75 mm3.756.07243

A pea gravel calculator UK order usually goes by the tonne. A 25 kg bag holds about 15.5 liters at this density, and bulk bags vary by supplier, so check the stated weight before you divide.

Common Searches on Pea Gravel Coverage

Each pea gravel calculator answer below uses 101 lb per cu ft, 0.5 cu ft bags and no waste allowance, so add your own margin for soft edges or uneven ground.

How many feet will 1 ton of pea gravel cover?

One ton of pea gravel covers about 79.2 sq ft at 3 in deep and 118.8 sq ft at 2 in. At 1 in it covers 237.6 sq ft, and at 4 in it covers 59.4 sq ft.

Coverage halves each time the depth doubles. Base the pea gravel calculator order on the depth you will actually rake to, since a ton spread an inch thinner leaves gaps where fabric shows.

How much pea gravel for a 10x10 area?

A 10 × 10 ft area needs 0.93 cu yd of pea gravel at 3 in deep, about 1.26 tons or 50 bags. At 2 in, it needs 0.62 cu yd, 0.84 tons or 34 bags.

In bulk at $45 a ton, the 3 in layer costs about $56.81. The same 50 bags at $5.50 each cost $275, so bags only make sense if delivery is unavailable.

How much pea gravel to cover 200 square feet?

Covering 200 sq ft at 3 in takes 1.85 cu yd of pea gravel, about 2.53 tons or 100 bags. At 2 in, it takes 1.23 cu yd, 1.68 tons or 67 bags.

A 20 × 10 ft area also needs 60 ft of edging around the outside. Without it, foot traffic spreads the stones and the layer thins at the borders first.

How many tons of gravel for 1000 sq ft?

For 1,000 sq ft of pea gravel, plan on 8.42 tons at 2 in deep or 12.63 tons at 3 in. That is 6.17 or 9.26 cu yd, which is a truck delivery rather than a bag job.

The 3 in layer would take 500 bags of 0.5 cu ft. In bulk at $45 a ton it costs about $568.13, against $2,750 for the same quantity bagged.

What does 1 ton of pea gravel look like?

One ton of pea gravel is about 19.8 cu ft, a pile roughly the size of a cube 2.7 ft on each side. It fills about 40 bags of 0.5 cu ft, or just under three-quarters of a cubic yard.

Spread out, that ton covers a 9 × 9 ft patch at 3 in deep. Damp stone looks the same but weighs more, so a wet ton covers slightly less ground.

Is 2 inches of pea gravel enough?

Two inches is enough for a path or patio on firm ground with landscape fabric, the low end of the 2 to 3 in range. It uses 0.62 cu yd per 100 sq ft, a third less than 3 in.

It is not enough for a driveway, which needs 3 to 4 in over a compacted base, and it is far short for a playground. Below 2 in, the fabric or soil shows through as stones scatter.

What is the best base for pea gravel?

For paths and patios, the best base for pea gravel is firm, graded soil covered with landscape fabric, held in by edging. For driveways, lay pea gravel over a compacted layer of crushed stone with fines.

Round pea gravel does not lock together, so the base does the structural work. A crushed stone calculator sizes that layer, and the pea gravel goes on top as a 2 to 4 in wearing surface.