Plant Spacing Calculator

Updated

Plant spacing calculator for plants needed in a bed, hedge or plot from center-to-center spacing and edge gap, in square, staggered or row layouts, per sq ft, m², acre and hectare.

Quick Setup

Measure the bed and set the center-to-center spacing from the plant tag; the edge gap is often half the spacing.

plants
rows
Extra Plants, Packs and Price5% extra · packs of 6 at $4.50
%
plants
per plant
Plants Needed
64 Plants
in a Square Grid
An area-only estimate would say 75 because it ignores the edges
4 Rows × 16 Plants
Left Along the Length0.0 in
Left Across the Width12.0 in
Rows that fit inside the edge gap, and the spare space left over.
78 Plants if Staggered
Difference+14 plants (+21.9%)
Staggered Row Gap15.6 in
Same bed in the other pattern, and the plants that adds or loses.
0.44 Plants per sq ft
Area per Plant2.25 sq ft
Plants per Acre19,360 per acre
Plants per unit of ground, the room each gets, and the field rate.
12 Packs of 6
Plants in the Packs72 plants
Cost$324.00
Plants to buy with a loss allowance, in full packs, and their cost.
Planting Layout DiagramDrawn to scale
64 plants shown to scale24.00 ft × 7.00 ft, dashed line is the 9.0 in edge gap
Plant Spacing ChartYour spacing is highlighted
SpacingSquare per sq ftStaggered per sq ftArea per Plant (Square)Plants for Your Bed
4 in9.0010.390.11 sq ft1,156
6 in4.004.620.25 sq ft552
8 in2.252.600.44 sq ft306
9 in1.782.050.56 sq ft248
10 in1.441.660.69 sq ft196
12 in1.001.151.00 sq ft138
15 in0.640.741.56 sq ft95
18 in0.440.512.25 sq ft64
24 in0.250.294.00 sq ft36
30 in0.160.186.25 sq ft30
36 in0.110.139.00 sq ft16
Vegetable Spacing GuideIn-row and between-row gaps
VegetableIn the RowBetween RowsBand Plants per sq ftIn Your BedSet
Asparagus18.0 in5.00 ftNot listed32
Beans, lima, bush4.0 in24.0 inNot listed204
Beans, lima, pole3.00 ft3.00 ftNot listed16
Beans, snap, bush4.0 in24.0 in3 to 4204
Beans, snap, pole3.00 ft24.0 inNot listed24
Beets3.0 in15.0 in25455
Broccoli15.0 in30.0 in357
Brussels sprouts18.0 in30.0 in248
Cabbage18.0 in24.0 in248
Cabbage, Chinese12.0 in18.0 inNot listed92
Carrots3.0 in15.0 in100455
Cauliflower24.0 in30.0 in236
Celery6.0 in18.0 inNot listed184
Chard, Swiss6.0 in24.0 in9138
Collards18.0 in24.0 inNot listed48
Corn, sweet12.0 in24.0 inNot listed69
Cucumbers3.00 ft30.0 in124
Eggplant30.0 in30.0 in130
Endive12.0 in18.0 in492
Kale15.0 in18.0 in476
Kohlrabi4.0 in15.0 in4340
Leeks3.0 in15.0 in64455
Lettuce, leaf or romaine8.0 in15.0 in6170
Lettuce, Bibb6.0 in15.0 inNot listed230
Muskmelons3.00 ft6.00 ft18
Mustard greens12.0 in15.0 in9115
Okra24.0 in3.00 ftNot listed24
Onions, dry4.0 in15.0 in16340
Parsley6.0 in15.0 in16230
Parsnips3.0 in18.0 in25364
Peas2.0 in18.0 in25544
Peppers15.0 in15.0 in495
Pumpkins4.00 ft8.00 ftNot listed6
Radishes1.0 in12.0 in1441,626
Rhubarb3.00 ft4.00 ftNot listed16
Rutabagas4.0 in18.0 in5272
Spinach4.0 in18.0 in4272
Squash, bush24.0 in4.00 ft124
Squash, vine3.00 ft6.00 ftNot listed8
Sweet potatoes12.0 in3.00 ft146
Tomatoes24.0 in3.00 ft124
Turnips3.0 in18.0 inNot listed364
Watermelons3.00 ft8.00 ftNot listed8
White potatoes12.0 in24.0 in169
Step-by-Step Plant Spacing Math6 steps
Space inside the edge gap288.000 in - 2 × 9.000 in = 270.000 in long; 84.000 in - 2 × 9.000 in = 66.000 in wide
Rowsfloor(66.000 in ÷ 18.000 in) + 1 = 4
Plants per rowfloor(270.000 in ÷ 18.000 in) + 1 = 16
Total4 × 16 = 64 plants
Plants to buy64 plants × 1.05 = 68 → 12 × 6 = 72 plants
Cost72 plants × $4.50 = $324.00
Center the Grid in the Bed
Set the first row 15.0 in from the side edge and the first plant 9.0 in from the end, so the spare space is even all round.

Why Bed Edges Change a Plant Spacing Calculator Count

A 24 by 7 ft bed planted 18 in apart holds 64 plants, not 75. Dividing 168 sq ft by the 2.25 sq ft each plant claims gives 74.7, but whole rows have to fit inside the edges of the bed.

A plant spacing calculator count works row by row. Each row is counted along its length with the first plant set back from the edge, then rows across the width are counted and multiplied.

Here L is the bed length, e is the edge gap from the bed edge to the first plant's center, and s is the center-to-center spacing. The floor rounds down, and the +1 adds the first plant.

In the 7 ft width, 84 in minus two 9 in gaps leaves 66 in. That fits 4 rows 18 in apart with 12 in to spare, so a fifth row never fits. Along 24 ft, 270 in fits 16 plants, and 4 × 16 = 64.

The edge gap is usually half the spacing, so outer plants reach the edge as they fill in. Setting plants right on the frame adds a whole extra row and column, with half of every outer plant hanging outside.

A 4 by 8 ft raised bed shows how far the methods drift apart. Area division only matches a plant spacing calculator count when the spacing divides both sides of the bed evenly.

SpacingEdge Gap of Half the SpacingPlants on the EdgeArea ÷ Spacing²
4 in288325288
6 in128153128
9 in506657
12 in324532
18 in101814
24 in8158

At 9 in, area division asks for 57 plants but only 50 fit; at 18 in it asks for 14 when 10 fit. Buying to the area figure leaves 7 and 4 plants with nowhere to go.

Once the plant spacing calculator count is set, the fill depth and soil volume for the same 4 by 8 ft frame come from the Raised Bed Soil Calculator.

Plants per Square Foot and per m² by Spacing

At 6 in spacing a square grid holds 4 plants per square foot, and at 12 in it holds 1. Plants per square foot equal 144 divided by the spacing in inches, squared.

Here D is plants per square foot and s is the spacing in inches. Each plant then claims s² ÷ 144 sq ft, so 18 in spacing gives 2.25 sq ft per plant and 0.44 plants per sq ft.

This plant spacing chart covers the common garden range, with the staggered density beside the square one and a count per 100 sq ft for ordering by the flat.

SpacingSquare, per sq ftStaggered, per sq ftSq ft per PlantSquare, per 100 sq ft
3 in16.0018.480.061,600
4 in9.0010.390.11900
6 in4.004.620.25400
8 in2.252.600.44225
9 in1.782.050.56178
10 in1.441.660.69144
12 in1.001.151.00100
15 in0.640.741.5664
18 in0.440.512.2544
24 in0.250.294.0025
36 in0.110.139.0011

Square foot gardening uses the top rows of the chart, where 16, 9, 4 and 1 plants per square match 3, 4, 6 and 12 in spacing. Purdue's HO-124 intensive gardening guide lists cooking onions at 16 and radishes at 144 per sq ft.

Multiply any density in the chart by the bed area for a quick plant spacing calculator per square foot estimate on open ground, then check it against the row count from the first section.

In metric units, plants per m² equal 10,000 divided by the spacing in centimeters, squared. One inch is exactly 2.54 cm, so 18 in is 45.72 cm and 30 cm is 11.81 in.

SpacingSquare, per m²Staggered, per m²Square, per 10 m²
10 cm100.00115.471,000.0
15 cm44.4451.32444.4
20 cm25.0028.87250.0
25 cm16.0018.48160.0
30 cm11.1112.83111.1
40 cm6.257.2262.5
50 cm4.004.6240.0
60 cm2.783.2127.8
75 cm1.782.0517.8
100 cm1.001.1510.0

Feet or meters, the plant spacing calculator total is the same, because 1 m² equals 10.764 sq ft. The common slip is a 45 cm spacing read as 45 in, which cuts the plant count to under a sixth.

Square Grid or Staggered: Where the 15.5% Gain Shrinks

On open ground a staggered layout holds 15.5% more plants than a square grid at the same spacing. In a small bed the gain can drop to zero or turn into a loss.

Staggered rows are shifted by half a space, so every plant sits the same distance from six neighbors. That lets the rows close up to 0.866 of the spacing.

Here r is the gap between staggered rows and s is the spacing along each row. Each plant claims 0.866 × s², and 1 ÷ 0.866 = 1.1547 is the gain behind every triangular plant spacing calculator figure.

Shifted rows lose a plant at one end, and the closer rows only help when an extra row fits across the bed. A 4 by 8 ft bed with a half-spacing edge gap shows both effects.

SpacingSquare GridStaggered, Rows Along 8 ftStaggered, Rows Along 4 ftStaggered Gain, Better Direction
4 in288306311+23 (+8.0%)
6 in128140135+12 (+9.4%)
9 in506054+10 (+20.0%)
12 in3230320
18 in10912+2 (+20.0%)
24 in876-1 (-12.5%)

At 12 in, the shifted rows along 8 ft hold 7 plants instead of 8, and the 48 in width still fits only 4 rows, so staggering costs 2 plants. Turning the rows the other way only brings it back level.

At 18 in the direction decides it: staggered rows along the 8 ft side hold 9 plants, while rows along the 4 ft side hold 12. Check both directions before trusting any staggered plant spacing calculator count.

A staggered plant spacing calculator result pays off on large plots and groundcover beds where many rows fit. In a narrow bed with wide spacing, a square grid is often equal or better, with straight lanes to hoe.

Rows With a Wider Gap for Vegetables

Plant spacing is the gap between plants within a row, and row spacing is the gap between rows. Rutgers Cooperative Extension fact sheet FS129 sets tomatoes 24 in apart in rows 36 in apart, so each plant claims 6 sq ft.

Here s is the in-row spacing and r is the row spacing, both in inches, and D is plants per square foot. Square spacing is the special case where r equals s.

For row crops, a plant spacing calculator result needs both numbers. The row figures below are from Rutgers FS129, and the last column is the intensive band-planting density from Purdue HO-124.

CropIn RowBetween RowsSq ft per PlantPer 100 sq ft in RowsPurdue Band, per sq ft
Tomatoes24 in36 in6.0016.71
Peppers15 in15 in1.5664.04
Leaf lettuce8 in15 in0.83120.06
Cabbage18 in24 in3.0033.32
Broccoli15 in30 in3.1332.03
Carrots3 in15 in0.31320.0100
Dry onions4 in15 in0.42240.016
Bush beans4 in24 in0.67150.03 to 4
Eggplant30 in30 in6.2516.01
Kale15 in18 in1.8853.34

The two systems are far apart. A tomato at 1 per sq ft uses one sixth of the row-garden area, and carrots go from 320 to 10,000 plants per 100 sq ft.

Utah State University Extension spaces tomatoes 18 to 24 in in the row and 36 to 48 in between rows, depending on variety. Rutgers' 24 by 36 in sits inside that range, so either source works as a plant spacing calculator input.

In a 4 by 8 ft bed with half the in-row spacing left at each edge, the Rutgers rows hold 4 tomatoes in a single row, 18 peppers, 36 leaf lettuces or 128 carrots.

Per Acre and Per Hectare Planting Density

One acre holds 43,560 plants at 12 in square spacing, because an acre is 43,560 sq ft. For any other spacing, divide that area by the square feet each plant claims.

Here s and r are the in-row and between-row spacing in feet. For hectares, use 10,000 m² and spacing in meters, so 1 m square spacing gives 10,000 plants per hectare.

The same division sits behind every plant spacing calculator per acre or per hectare figure. The tables run from garden spacing up to orchard trees set out on a square or a triangle.

SpacingSquare, per AcreStaggered, per Acre
12 in43,56050,299
18 in19,36022,355
24 in10,89012,575
36 in4,8405,589
5 ft1,7422,012
10 ft436503
15 ft194224
20 ft109126
SpacingSquare, per HectareStaggered, per Hectare
25 cm160,000184,752
50 cm40,00046,188
1 m10,00011,547
2 m2,5002,887
3 m1,1111,283
5 m400462

Row crops use both spacings in a plant spacing calculator per acre count. The Rutgers tomato spacing of 2 by 3 ft works out to 7,260 plants per acre, and 15 by 15 in peppers to 27,878.

Apply the per-acre rate to the planted area only, not to paths and headlands. A 1 acre block with 10% lost to paths holds 6,534 tomatoes at 2 by 3 ft, not 7,260.

Hedges and Single Rows by the Foot or Meter

Hedge plants usually go 30 to 60 cm (1 to 2 ft) apart in the row, according to the RHS hedge planting guide. For hedges thicker than 90 cm, it advises a staggered double row with rows 45 cm apart and plants 90 cm apart.

Ashridge Nurseries puts the most common garden hedge at 33 cm, three plants per meter, with the first plant set half a space in from the end rather than on the line.

For a hedge or a vegetable row, the plant spacing calculator count follows the bed-row formula from the first section. A 30 ft row at 18 in with 9 in end gaps holds 342 ÷ 18 = 19 spaces, plus 1, or 20 plants.

RunSpacingEnd GapSingle RowStaggered Double Row
10 m33 cm16.5 cm3059
10 m40 cm20 cm2549
10 m40 cm02651
30 ft18 in9 in2039
30 ft18 in02141
20 ft24 in12 in1019

The shifted second row holds one plant fewer, because it starts half a space later. Ashridge describes the same shortfall in a 6-per-meter double row, whose last meter holds 5 plants.

Plants per foot or per meter turn a plant spacing calculator hedge count into an order. Thirty plants on 10 m is 3 per meter, and 20 plants on 30 ft is 0.67 per foot, or 66.7 per 100 ft of hedge.

Odd Shapes, Circles and Spacing From a Plant Count

A plant spacing calculator count for a round bed works in rings, not by area. An 8 ft circle at 12 in spacing with a 6 in rim gap holds 47 plants, while 50.27 sq ft at 1 sq ft per plant says 51.

Here A is the bed area and d is its diameter. Area division ignores the curved wall, so the rings are laid out from the rim inward, one spacing apart, with each ring holding as many plants as stay one spacing apart around it.

Here n is the plant count on a ring of radius ρ and s is the spacing. In the 8 ft bed the rings sit 42, 30, 18 and 6 in from the center and hold 21, 15, 9 and 2 plants.

In metric, a 2 m circle with a 15 cm rim takes 32 plants at 30 cm, in rings of 17, 11 and 4, against 35 by area. With no rim the outer ring sits on the edge and the count rises to 43.

Split a kidney bed or an L-shaped border into rectangles and circles, count each part, then add them. Density counts for odd shapes carry no edge gap, so they run a little high on small beds.

To find the area required for planting, reverse the plant spacing calculator math: plants times area per plant. Fifty plants at 18 in need 112.5 sq ft in a square grid, or 97.4 sq ft staggered.

With a fixed count and area, the plant spacing calculator answer is a spacing. 100 plants on 200 sq ft is 0.5 per sq ft, which sets square spacing at 16.97 in and staggered spacing at 18.24 in.

Here A is the planting area, N is the plant count and s is the spacing, in matching units; the first line is the square grid and the second is staggered. This plant spacing formula works in feet, inches or meters as long as A and s match.

Round the spacing down so every plant fits. At 16 in square spacing the same 200 sq ft has room for 112 plants, and at 18 in staggered for 102, leaving spares for the 100 in hand.

Mulch volume for the same bed area comes from the Mulch Calculator, for the bare soil between young plants until they close over.

Center Spacing, Pots and Buying Extra Plants

Spacing on a plant tag is always measured center to center. Most questions after that are about small containers, fixed areas and how many plants to order.

What is center-on-center spacing?

Center-on-center spacing is the distance from the middle of one plant's stem to the middle of the next. A tag reading 18 in means stems 18 in apart, so two plants each 18 in wide just touch at maturity.

Every plant spacing calculator input means center to center, not the gap between leaves. Measuring 18 in from the edge of one young plant to the edge of the next can stretch real spacing to 24 in, which drops the plant count by over 40%.

How do I find the right plant spacing?

Start from the mature spread on the plant tag or seed packet and use it as the plant spacing calculator center spacing. For vegetables, extension charts such as Rutgers FS129 give tested in-row and between-row figures.

Then decide how soon the bed should close. Groundcovers set at 12 in instead of 18 in need 2.25 times as many plants for the same area, which buys faster cover at a higher cost.

Can I plant closer than the recommended spacing?

Closer planting is the basis of intensive beds, where Purdue's band-planting table sets tomatoes at 1 per sq ft against 1 per 6 sq ft in Rutgers rows. That is six times the plants on the same ground.

Six times the plants is not six times the harvest, since each plant gets a sixth of the soil, water and light. Utah State notes that indeterminate tomatoes need more space than determinate ones.

How many plants fit in a pot or container?

A 12 in pot at 6 in spacing fits 2 plants once a 3 in rim is kept clear, even though its 113 sq in divides into 3.14 plant spaces. A round wall wastes space that any plant spacing calculator density figure ignores.

With a 3 in rim, plant centers stay inside a 6 in circle, which holds 2 plants 6 in apart or 3 plants 5.2 in apart. An 18 in pot at 6 in fits 7, a ring of 6 around one center plant, against 8 by area.

How many plants spaced 50 cm apart can I fit in a 3×2 m area?

A 3 by 2 m area fits 24 plants at 50 cm in a square grid with a 25 cm edge gap, as 6 plants along the 3 m side in 4 rows. That matches 6 m² divided by 0.25 m² per plant, the density a plant spacing calculator in meters starts from.

Staggering does not help here. Rows 43.3 cm apart still fit only 4 across 1.5 m, and the shifted rows lose an end plant, giving 22. With plants on the boundary and no gap, the square grid reaches 35.

How many extra plants should I buy?

Add your expected loss rate to the plant spacing calculator count, then round up to whole packs. At 5%, a 64-plant bed needs 68 plants, which in packs of 6 means 12 packs, or 72 plants costing $324.00 at $4.50 each.

Pack rounding often covers the allowance on its own. The same 64 plants with no extra still take 11 packs of 6, or 66 plants, so the 5% allowance costs one more pack.