Rainwater harvesting calculator for roof catchment, giving yearly yield in gallons or liters by roof material, monthly tank size, dry-spell storage and payback at local water cost.
Use the roof footprint that drains to your gutters, not the sloped surface area.
Monthly Rainfall
Losses, Dry Spell and Storm
Water Rate and System Cost
Rainwater Harvesting Diagram
Rainwater Harvest by Roof Size
| Roof Area | Gross per Inch | Net per Inch | Net per Year |
|---|---|---|---|
| 500 sq ft | 312 gal | 252 gal | 9,083 gal |
| 1,000 sq ft | 623 gal | 505 gal | 18,167 gal |
| 1,500 sq ft | 935 gal | 757 gal | 27,250 gal |
| 2,000 sq ft | 1,246 gal | 1,009 gal | 36,333 gal |
| 2,500 sq ft | 1,558 gal | 1,262 gal | 45,417 gal |
| 3,000 sq ft | 1,869 gal | 1,514 gal | 54,500 gal |
| 4,000 sq ft | 2,492 gal | 2,019 gal | 72,667 gal |
Step-by-Step Rainwater Math
Rainwater Harvesting Calculator Formula in Gallons and Liters
Each inch of rain on 1 sq ft of roof is 0.623 US gallons. In a rainwater harvesting calculator estimate, a 2,000 sq ft metal roof in a 36 inch climate collects about 36,333 gallons a year once runoff and system losses are taken off.
V is the yearly harvest in US gallons, A is the roof footprint in square feet and R is rainfall in inches. C is the runoff coefficient for the roof surface and L is the share lost to first flush, splash and overflow.
The 0.623 comes from 7.48 gallons per cubic foot divided by 12 inches per foot. The Texas Manual on Rainwater Harvesting rounds it to 0.62 gallons per square foot per inch.
In metric units the rainwater harvesting calculation formula is simpler for any rainwater harvesting calculator India or UK estimate.
One millimeter of rain on one square meter is one liter, so liters equal roof area in m² times rainfall in mm times C times (1 - L).
| Roof footprint | Gross per inch | Net per inch | Net per year at 36 in |
|---|---|---|---|
| 500 sq ft (46 m²) | 312 gal | 252 gal | 9,083 gal |
| 1,000 sq ft (93 m²) | 623 gal | 505 gal | 18,167 gal |
| 1,500 sq ft (139 m²) | 934 gal | 757 gal | 27,250 gal |
| 2,000 sq ft (186 m²) | 1,246 gal | 1,009 gal | 36,333 gal |
| 3,000 sq ft (279 m²) | 1,869 gal | 1,514 gal | 54,500 gal |
| 4,000 sq ft (372 m²) | 2,492 gal | 2,019 gal | 72,667 gal |
The net columns in this rainwater harvesting calculator table use a metal roof at C 0.9 with 10% system losses, so 81% of the rain reaches the tank.
That sits at the low end of the 75 to 90 percent collection efficiency the Texas manual says most installers assume.
Runoff Coefficients by Roof Material
A metal roof delivers 0.9 of the rain that falls on it, tile about 0.75 and a flat cement roof about 0.65.
Thatch and other organic roofs pass only 0.2, so in a roof rainwater collection calculator they collect less than a quarter of what a metal roof does.
These values sit inside the ranges published by RUVIVAL, the Hamburg University of Technology learning project, which lists iron sheets above 0.9, aluminium 0.8 to 0.9, tiles 0.6 to 0.9 and flat cement 0.6 to 0.7.
| Roof surface | Coefficient | Net factor with 10% losses | 2,000 sq ft, per inch | 2,000 sq ft, per year at 36 in |
|---|---|---|---|---|
| Metal sheet | 0.90 | 0.810 | 1,009 gal | 36,333 gal |
| Aluminium sheet | 0.85 | 0.765 | 953 gal | 34,315 gal |
| Tile | 0.75 | 0.675 | 841 gal | 30,278 gal |
| Flat cement | 0.65 | 0.585 | 729 gal | 26,241 gal |
| Thatch or organic | 0.20 | 0.180 | 224 gal | 8,074 gal |
The quick rule that 1 inch on 1,000 sq ft yields 623 gallons is the gross figure. On a metal roof with losses the real yield is 505 gallons, so the rule overstates a rainwater harvesting calculator result by 23%, and on a tile roof by 48%.
A rough or porous surface holds water in its texture, and the first light rain of each storm only wets the roof. The Texas manual puts the loss on clay or concrete tile at up to 10%, and smoother roofs lose less.
Monthly Tank Sizing With a Water Balance
A rainwater harvesting tank size calculator tracks each month's harvest minus use and finding the smallest volume that never runs dry.
A 2,000 sq ft metal roof with rain spread evenly through a 33.6 inch year needs only a 721 gallon tank for 80 gallons a day.
Sm is the water stored at the end of month m, Hm is that month's harvest and Um is its use, all in gallons. Storage never drops below zero, and anything above the tank size overflows and is lost, the same balance the Texas manual uses.
The common rainwater harvesting calculator shortcut of three months of demand, or yearly use divided by four, says 7,300 gallons for 80 gallons a day. With even rain that is ten times too big, because every month refills most of what the house uses.
Seasonal rain flips the result. The same roof in a 31 inch climate with wet winters and a dry summer, from 5.3 inches in December to 0.2 inches in July, needs a 9,472 gallon tank, and the shortcut falls 2,172 gallons short.
| Daily use, seasonal rain | Tank with no dry month | 3-month shortcut | Use met with 2,500 gal | Use met with 5,000 gal |
|---|---|---|---|---|
| 50 gal (189 L) | 4,622 gal | 4,563 gal | 88.4% | 100% |
| 60 gal (227 L) | 6,152 gal | 5,475 gal | 83.3% | 94.7% |
| 80 gal (303 L) | 9,472 gal | 7,300 gal | 76.1% | 84.7% |
A rainwater harvesting tank calculator built on monthly rain catches both errors, which no yearly total can.
Feed it median monthly rainfall rather than the average where you can, since the Texas manual calls median the more conservative choice for sizing.
No tank fixes a yearly gap. With even rain, 100 gallons a day uses 36,500 gallons against a 33,911 gallon harvest, so a 2,500 gallon tank still runs short in 5 months and meets 92.9% of use.
Dry Spells, Storms and Drum Count
Covering 30 days without rain at 80 gallons a day takes 2,400 gallons of storage in rainwater harvesting calculator terms, about 9,085 liters. In 55 gallon drums that is 44 drums, or 46 drums of 200 liters.
A single storm sets how fast that storage refills. On the 2,000 sq ft metal roof, a 1.5 inch storm delivers 1,514 gallons, so one good rain refills 63% of a 2,400 gallon dry-spell tank.
| Daily use | Dry days | Storage needed | 55 gal drums | 200 L drums |
|---|---|---|---|---|
| 50 gal | 45 | 2,250 gal (8,517 L) | 41 | 43 |
| 80 gal | 30 | 2,400 gal (9,085 L) | 44 | 46 |
| 80 gal | 60 | 4,800 gal (18,170 L) | 88 | 91 |
| 150 gal | 30 | 4,500 gal (17,034 L) | 82 | 86 |
Drums suit a garden with light use, but 44 linked drums need far more ground and fittings than one 2,500 gallon tank. Storm capture on this roof runs 505 gallons at 0.5 inch, 1,009 gallons at 1 inch and 3,028 gallons at 3 inches.
Size the tank for the dry spell, then check in the rainwater harvesting calculator math that one storm can fill a useful share of it. The Tank Volume Calculator turns a chosen gallon or liter figure into cylinder or box dimensions.
Annual Coverage of Household Water Use
A 2,000 sq ft metal roof in a 36 inch climate covers 124% of a household using 80 gallons a day, but only 35% in a 10 inch climate. Rainfall moves rainwater harvesting calculator coverage far more than roof material or tank size.
| Annual rainfall | 1,000 sq ft roof | 2,000 sq ft roof | 3,000 sq ft roof | 2,000 sq ft, share of 80 gal/day |
|---|---|---|---|---|
| 10 in (254 mm) | 5,046 gal | 10,093 gal | 15,139 gal | 34.6% |
| 20 in (508 mm) | 10,093 gal | 20,185 gal | 30,278 gal | 69.1% |
| 36 in (914 mm) | 18,167 gal | 36,333 gal | 54,500 gal | 124.4% |
| 50 in (1,270 mm) | 25,232 gal | 50,463 gal | 75,694 gal | 172.8% |
For a metric UK or India check, a 100 m² metal roof collects 81 liters per mm of rain. At 800 mm a year that is 64,761 liters, or 177 liters a day on average.
The same 100 m² roof gives 48,571 liters at 600 mm, 97,141 liters at 1,200 mm and 161,902 liters at 2,000 mm. A tile roof at C 0.75 collects 53,967 liters at 800 mm, about 17% less than metal.
The yearly surplus at 36 inches only helps if storage carries it into dry months. Where coverage sits below 100%, the shortfall has to come from mains water, a well or lower use, whatever the tank size.
Savings and Payback at Local Water Rates
At $8.50 per 1,000 gallons, a household using all 29,200 gallons of its yearly 80 gallon a day demand from rain saves $248 a year. A $3,000 system pays back in about 12.1 years at that rate in a rainwater harvesting calculator payback check.
Only water you use replaces bought water. The 2,000 sq ft roof collects 36,333 gallons a year, but the 7,133 gallons above the household's 29,200 gallon use save nothing.
That is why rainwater harvesting calculator savings count the smaller of harvest and use, not the full yearly harvest.
| Water and sewer rate | Saved per year | Saved per month | Payback on $3,000 |
|---|---|---|---|
| $4.00 per 1,000 gal | $116.80 | $9.73 | 25.7 years |
| $8.50 per 1,000 gal | $248.20 | $20.68 | 12.1 years |
| $12.00 per 1,000 gal | $350.40 | $29.20 | 8.6 years |
| $15.00 per 1,000 gal | $438.00 | $36.50 | 6.8 years |
Use the combined water and sewer rate from your bill, since many utilities charge sewer on metered water.
Outdoor-only rainwater may not cut the sewer charge where that is billed separately, so check which part of the rate the harvest actually replaces.
Catchment Area, Tanks and Diverters
Each answer below works fresh numbers through the same rainwater harvesting calculator math as the tables above.
What is a rainwater harvesting calculator?
It is an estimate of how much rain a roof can collect and how big a tank must be to store it. The core rainwater harvesting formula is roof area times rainfall times 0.623, then times the runoff coefficient and the share left after losses.
A rainfall collection calculator that stops at the yearly total misses the tank question, since sizing needs monthly rain. A 31 inch year with a dry summer needs a 9,472 gallon tank where an even 33.6 inch year needs 721 gallons.
How do I calculate rainwater harvesting potential?
Multiply the roof footprint by the yearly rainfall and by 0.623 for US gallons, then by the runoff coefficient and one minus the losses. A 1,500 sq ft tile roof in a 20 inch climate gives 1,500 × 20 × 0.623 × 0.675, about 12,616 gallons.
In metric, multiply m² by mm to get liters before the coefficient. A 60 m² flat cement roof with 1,000 mm of rain gives 60,000 liters gross and about 35,080 liters net at a 0.585 net factor.
How much rainwater can a 1,000 sq ft roof collect?
A 1,000 sq ft roof collects 623 gallons per inch of rain before losses, and about 505 gallons as a metal roof with 10% losses. In a 36 inch year that is 18,167 gallons net.
That 505 gallons per inch covers an 80 gallon a day household for about 6 days. On tile the same roof nets 421 gallons per inch, about 5 days of the same use.
What size rainwater tank do I need?
The right tank is the smallest one that carries the wet months' surplus through the driest stretch without running dry. For 60 gallons a day from a 2,000 sq ft metal roof in a dry-summer 31 inch climate, that is 6,152 gallons.
In rainwater harvesting calculator terms, a 5,000 gallon tank on that house meets 94.7% of use and runs short in 2 months. Any tank above the no-shortfall size only adds overflow storage, so buying past it buys nothing.
Should I use the roof's slope area or footprint?
Use the footprint, the flat area the roof covers seen from above, not the sloped surface. The Texas manual states that the effective collection surface is the area covered, whatever the pitch.
Rain falls straight down, so a steep roof over 1,000 sq ft of floor catches the same water as a flat one.
Count only the parts that drain to guttered downspouts feeding the tank in any rainwater harvesting calculator area, since an unguttered side collects nothing.
What runoff coefficient should I pick?
Use 0.9 for metal, 0.85 for aluminium, 0.75 for tile, 0.65 for flat cement and 0.2 for thatch. The coefficient is the share of rain that runs off the surface into the gutters, after wetting and texture losses.
It matters because it scales the whole rainwater harvesting calculator harvest. On a 2,000 sq ft roof in a 36 inch year, choosing tile instead of metal drops the net harvest from 36,333 to 30,278 gallons, a 6,055 gallon difference.
What is a first flush diverter and do I need one?
A first flush diverter sends the first dirty runoff of each storm away from the tank, along with the dust and debris it carries. The Texas manual suggests diverting at least 10 gallons for every 1,000 sq ft of roof.
The same manual also cites 1 to 2 gallons per 100 sq ft, so a 2,000 sq ft roof diverts 20 to 40 gallons per storm. That is 2 to 4% of one inch of net harvest, well inside the 10% system loss a rainwater harvesting calculator default allows.
Can a rainwater harvesting calculator tell me my ROI?
Payback is the system cost divided by yearly savings, and savings are the rainwater you use times your water and sewer rate. A $5,000 system saving $350.40 a year at $12 per 1,000 gallons pays back in about 14.3 years.
Savings stop rising once harvest exceeds use, so a bigger roof or tank does not raise the return past that point. A rainwater harvesting calculator online estimate of ROI also leaves out pump power and maintenance, which lengthen the payback.