Steel Plate Weight Calculator

Updated

Steel Plate Weight Calculator for rectangular, round, ring, gusset, hexagon and drilled base plates in 9 steel grades, finding weight, thickness or length from a weight, plus cost.

Quick Setup

Pick the steel type and enter the plate size.

pcs
holes
Solve for Thickness or LengthPlate weight
Price and Cost$783.10 at $1.20 per lb
Weight of 1 Plate
652.58 lb Plate Weight
296.01 kg, Carbon Steel at 489.44 lb/cu ft
20.39 lb per Sq Ft
Per Square Meter219.51 lb
Per Sq Ft per Inch Thick40.79 lb
Plate weight spread over its face area, the figure mills and charts list for each thickness.
32.000 sq ft Plate Area
Paint Area, All Sides65.000 sq ft
In Square Meters2.973 m²
One face of the plate, plus the paint or blast area with both faces and all edges counted.
1.333 cu ft Steel Volume
In Metric37,756 cm³
Plates per US Ton3.06
Face area times thickness gives the steel volume that the density turns into weight.
$783.10 Plate Cost
Cost per Sq Ft$24.47
Cost per kg$2.65
Your price times the weight, the face area or the plate count, whichever basis you picked.
Live Plate Diagram96 in × 48 in, 0.5 in thick
Steel Plate Weight Chart1/4 to 6 in, Carbon Steel
Weight by Steel Type9 steel types compared
Step-by-Step Plate Weight MathWith your numbers
    Plate Weight Found
    This is the nominal weight. Mills roll plate at or a little over nominal thickness, so a scale weight often reads higher.

    Per-Inch Rule Behind Every Steel Plate Weight Calculator

    Carbon steel plate weighs 40.84 lb per square foot for each inch of thickness. In metric, it weighs 7.85 kg per square meter for each millimeter, so 10 mm plate is 78.5 kg/m².

    W is the total steel plate weight calculator result, L the length, Wd the width, t the thickness, rho the density and n the plate count. With inches and 0.2836 lb/in³ for carbon steel, the result is in pounds.

    Here length and width are in meters and thickness in millimeters. A 2.5 × 1.5 m plate 6 mm thick works out to 2.5 × 1.5 × 6 × 7.85 = 176.63 kg, the shortcut behind any steel plate weight calculator in kg.

    Both steel plate weight calculator rules rest on 7,850 kg/m³, which equals 490 lb/ft³. That is the steel figure in the Iowa DOT rules for computing structural steel weight, and it is the basis of published plate weight tables.

    Some density lists put carbon steel at 7,840 kg/m³, 0.13% under the chart figure. A 4 × 8 × 1/2 in plate comes to 652.58 lb at 7,840 against 653.41 lb at 7,850, a gap smaller than mill thickness variation.

    Using 0.282 lb/in³ in a steel plate weight calculator in lbs reads 0.6% light, and rounding up hides it. A 4 × 8 ft plate 3/16 in thick weighs 245.0 lb at 0.2836 lb/in³, not the "about 250 lb" often quoted for it.

    Thickness Chart in lb per sq ft and kg per m²

    Quarter-inch carbon steel plate weighs 10.21 lb per square foot, or 49.85 kg/m², in this steel plate weight chart. One-inch plate weighs 40.84 lb per square foot, and stainless at 8,030 kg/m³ adds about 2.3% at every thickness.

    Thickness (in)Carbon Steel (lb/ft²)Carbon Steel (kg/m²)Stainless (lb/ft²)
    3/167.6637.397.83
    1/410.2149.8510.44
    5/1612.7662.3113.05
    3/815.3174.7715.67
    1/220.4299.6920.89
    5/825.52124.6226.11
    3/430.63149.5431.33
    7/835.73174.4736.55
    140.84199.3941.77
    1 1/451.05249.2452.22
    1 1/261.26299.0862.66
    281.68398.7883.55
    3122.51598.17125.32
    4163.35797.56167.10
    6245.031,196.34250.65

    Metric plate follows the 7.85 rule exactly, so a steel plate weight calculator kg m2 figure is simply thickness × 7.85. The table adds whole-sheet weights for three common metric sheet sizes.

    Thickness (mm)Carbon Steel (kg/m²)Stainless (kg/m²)1250 × 2500 mm (kg)1500 × 6000 mm (kg)2000 × 6000 mm (kg)
    323.5524.0973.6211.9282.6
    539.2540.15122.7353.2471.0
    647.1048.18147.2423.9565.2
    862.8064.24196.2565.2753.6
    1078.5080.30245.3706.5942.0
    1294.2096.36294.4847.81,130.4
    16125.60128.48392.51,130.41,507.2
    20157.00160.60490.61,413.01,884.0
    25196.25200.75613.31,766.22,355.0
    30235.50240.90735.92,119.52,826.0
    40314.00321.20981.22,826.03,768.0
    50392.50401.501,226.63,532.54,710.0
    100785.00803.002,453.17,065.09,420.0

    Inch and metric plates rarely match in a steel plate weight calculator total. A 1/4 in plate is 6.35 mm, so it weighs 49.85 kg/m² against 47.10 kg/m² for 6 mm plate, a 5.8% gap when a drawing in one system is filled from stock in the other.

    Stock Sheet Sizes and Their Weights

    A 4 × 8 ft steel plate 1/4 in thick weighs 326.7 lb, and a 1 in plate of the same size weighs 1,306.8 lb. Each sheet weight is the steel plate weight calculator per-square-foot figure times the sheet area.

    Plate stockists carry widths from about 36 to 120 in and lengths from 96 to 480 in. Continental Steel's carbon plate range, for one, runs 3/16 to 8 in thick within those sizes.

    Thickness (in)48 × 96 in (lb)60 × 120 in (lb)96 × 240 in (lb)120 × 240 in (lb)96 × 480 in (lb)
    3/16245.0382.91,225.11,531.42,450.3
    1/4326.7510.51,633.52,041.93,267.1
    3/8490.1765.72,450.33,062.94,900.6
    1/2653.41,021.03,267.14,083.86,534.1
    3/4980.11,531.44,900.66,125.79,801.2
    11,306.82,041.96,534.18,167.713,068.3

    A single 8 × 20 ft plate at 1/2 in already weighs 3,267 lb, more than one and a half times a 1-ton hoist's rating. Check lifting gear against the steel plate weight calculator figure before the plate leaves the truck.

    For metal plates in aluminum, the Aluminum Weight Calculator uses the same area math at about one third of steel's weight.

    Disc, Ring, Gusset and Hexagon Plates

    A 24 in round steel plate 1/2 in thick weighs 64.15 lb. Round steel plate weight calculator math is π ÷ 4 × diameter² × thickness × density, so doubling the diameter quadruples the weight.

    Shape, 1/2 in ThickArea FormulaArea (sq in)Weight (lb)Weight (kg)
    Disc, 12 inπ ÷ 4 × D²113.1016.047.27
    Disc, 24 inπ ÷ 4 × D²452.3964.1529.10
    Disc, 36 inπ ÷ 4 × D²1,017.88144.3365.47
    Ring, 24 in OD × 12 in IDπ ÷ 4 × (D² - d²)339.2948.1121.82
    Half circle, 24 inπ ÷ 8 × D²226.1932.0714.55
    Oval, 24 × 12 inπ ÷ 4 × a × b226.1932.0714.55
    Hexagon, 12 in across flats0.866 × s²124.7117.688.02
    Gusset triangle, 12 × 12 inb × h ÷ 272.0010.214.63
    Trapezoid, 12 and 6 in × 8 in tall(a + b) ÷ 2 × h72.0010.214.63

    A round plate weight calculator in kg uses the same disc area in meters. A 1,000 mm disc 10 mm thick weighs 61.65 kg, and a 500 mm OD ring with a 300 mm bore at 12 mm weighs 11.84 kg.

    Cutting a disc from a square leaves 21.5% of the square as scrap. A 24 in disc weighs 64.15 lb, but the 24 × 24 in square it comes from weighs 81.68 lb, and that larger steel plate weight calculator figure is the one bought and shipped.

    Holes, Cutouts and Net Plate Weight

    Bolt holes barely move a base plate's steel plate weight calculator total. A 14 × 14 × 1 in plate weighs 55.59 lb, and four 1 1/16 in holes trim it to 54.58 lb, a 1.8% cut.

    PlateHolesGross (lb)Net (lb)Removed
    12 × 12 × 3/4 in4 × 13/16 in30.6330.191.4%
    14 × 14 × 1 in4 × 1 1/16 in55.5954.581.8%
    18 × 18 × 1 1/4 in4 × 1 5/16 in114.86112.941.7%
    10 × 10 × 1/2 in1 × 6 in14.1810.1728.3%

    Large cutouts are the case worth netting out. A single 6 in hole in a 10 in square removes 28% of the steel, so use the net weight for the finished part and the gross weight for the blank.

    Any odd outline reduces to a known face area times thickness for a steel plate weight calculator estimate. A plasma-cut part with a 2.5 sq ft face at 3/8 in weighs 2.5 × 15.31 = 38.29 lb, whatever its shape.

    Grades From Tool Steel to Stainless

    Grade shifts a steel plate weight calculator result by only a few percent. A 4 × 8 × 1/4 in plate weighs 321.09 lb in tool steel at 7,715 kg/m³, 326.71 lb at the 7,850 chart figure and 334.20 lb in stainless at 8,030 kg/m³.

    Steel TypeDensity (kg/m³)lb/ft² per Inch4 × 8 × 1/4 in (lb)4 × 8 × 1/4 in (kg)
    Tool Steel7,71540.14321.09145.64
    Wrought Iron7,75040.32322.54146.30
    Carbon Tool Steel7,82040.68325.46147.63
    Cold-Drawn Steel7,83040.73325.87147.81
    Carbon Steel7,84040.79326.29148.00
    C1020 HR Steel7,85040.84326.71148.19
    Pure Iron7,86040.89327.12148.38
    Mild Steel7,87040.94327.54148.57
    Stainless Steel8,03041.77334.20151.59

    MS plate, or mild steel, is carbon steel, and plate tables use one 7,850 kg/m³ figure for both, the C1020 HR row. Carbon steel at 7,840 or mild steel at 7,870 moves a 10-ton MS plate weight calculator in kg total by only 25 to 51 lb.

    A stainless steel plate weight calculator in kg runs 2.3% above carbon steel. On a 20-plate order of 4 × 8 × 1/4 in, that difference adds 150 lb to the truck.

    Target Weight: Solving for Thickness or Length

    A 4 × 8 ft carbon steel plate that must stay under 2,000 lb can be up to 1.53 in thick. Thickness is the weight divided by the area and the density, the steel plate weight calculator equation solved for t.

    The same rearrangement sets a length. A 48 in wide, 1/2 in carbon plate reaches 1,000 lb at 146.92 in, or 12 ft 3 in, which caps the cut length for a 1,000 lb lifting limit.

    Stainless plate sizing follows the same steel plate weight calculator math at 8,030 kg/m³. For 300 lb of 1/4 in stainless, 48 in wide, the plate can run 86.18 in long, just over 7 ft 2 in.

    In metric, a 1250 × 2500 mm sheet held to 500 kg can be up to 20.38 mm thick. Mill plate tends to roll at or slightly over nominal, so leave margin below a hard weight limit.

    Coating Area and Price per Square Foot

    A 4 × 8 × 1/4 in plate has 32 sq ft of face but 64.5 sq ft to paint or blast, counting both faces and all four edges. Coating quotes need the full surface, not the face area.

    Steel sold by the pound converts to a price per square foot through the steel plate weight calculator weight per square foot. At an example price of $0.60/lb, 1/4 in plate costs $6.13 per square foot, and 1 in plate $24.50.

    4 × 8 ft PlateWeight (lb)Cost at $0.60/lbCost per sq ft
    1/4 in326.7$196.02$6.13
    1/2 in653.4$392.05$12.25
    1 in1,306.8$784.10$24.50

    The $0.60 figure is a placeholder, so use a current quote. A price per kilogram divides by 2.2046 to become a price per pound, and mixing the two is the usual cause of a quote that looks 2.2 times too high.

    Bars, beams and tube for the same job use volume-times-density math in the Steel Weight Calculator, and other metals sit in the Metal Weight Calculator.

    Replies on Stainless, 12 mm Steel and the 162 Rule

    Steel plate weight calculator figures below use 7,850 kg/m³ (0.2836 lb/in³) for carbon steel, with stainless at 8,030 kg/m³ and nominal thickness.

    How much does a steel plate weigh?

    Steel plate weighs 40.84 lb per square foot per inch of thickness, or 7.85 kg per square meter per millimeter. A 5 × 10 ft plate at 3/8 in has 50 sq ft and weighs 765.7 lb.

    Thickness sets the weight per square foot and area sets the steel plate weight calculator total. A 10 × 20 ft plate 1 in thick weighs 8,167.7 lb, over four US tons on one sheet.

    What is a steel plate mass calculator?

    A steel plate mass calculator is the same estimate as a weight calculator, with mass reported in kilograms. Its math is face area × thickness × steel density, with 7,850 kg/m³ for carbon steel.

    A 1.2 × 2.4 m plate 10 mm thick has a mass of 1.2 × 2.4 × 10 × 7.85 = 226.08 kg. Mass and weight are used as the same number in kg or lb in fabrication work.

    How do you calculate the weight of a steel plate?

    Multiply length × width × thickness × 0.2836 lb/in³ for carbon steel in inches, the steel plate weight calculation formula. A 36 × 72 in plate 1/2 in thick holds 1,296 cu in and weighs 367.5 lb.

    In metric, multiply length × width in meters by thickness in millimeters and by 7.85. Steel weight for bar and beam follows the same volume rule with the section area in place of length × width.

    How do I calculate the dimensions of a stainless steel plate?

    Divide the target weight by the density and the known sizes to find the missing one, steel plate weight calculator math run backward. For 1/4 in stainless, 48 in wide and 300 lb, length = 300 ÷ (48 × 0.25 × 0.2901) = 86.18 in.

    Solving for thickness works the same way. A 4 × 8 ft stainless plate weighing 668 lb is about 1/2 in thick, since 668 ÷ (4,608 × 0.2901) = 0.50 in.

    How much does a 1/4-inch of stainless steel plate weigh?

    Quarter-inch stainless plate weighs 10.44 lb per square foot at 8,030 kg/m³ in any stainless steel plate weight calculator. A 4 × 8 ft sheet weighs 334.2 lb, or 151.6 kg, about 7.5 lb more than carbon steel.

    In metric, 1/4 in is 6.35 mm, so the stainless plate weighs 6.35 × 8.03 = 50.99 kg/m². Specific grades such as 304 and 316 sit within about 1% of that figure.

    What is steel plate?

    Steel plate is flat-rolled steel thicker than sheet, stocked from about 3/16 in (4.8 mm) upward. Thinner flat steel is sold as sheet and usually ordered by gauge.

    At 3/16 in, plate weighs 7.66 lb per square foot. Pipe and tube are rolled from plate and strip too, and the Pipe Weight Calculator covers those by schedule.

    What is the standard size of steel plate?

    Common steel plate sizes are 48 × 96, 60 × 120, 96 × 240, 120 × 240 and 96 × 480 in. Stockists cut widths from about 36 to 120 in and lengths from 96 to 480 in.

    A 96 × 240 in plate at 3/8 in weighs 2,450.3 lb, while the 48 × 96 in sheet of the same thickness weighs 490.1 lb. Metric mills commonly roll 1250 × 2500, 1500 × 6000 and 2000 × 6000 mm.

    What is the weight of 12 mm steel?

    A 12 mm steel plate weighs 94.20 kg per square meter, or 19.29 lb per square foot, by steel plate weight calculator in kg math. A 1250 × 2500 mm sheet of it weighs 294.4 kg.

    A 12 mm round steel bar is different and weighs 0.888 kg per meter. Check whether "12 mm steel" means plate thickness or bar diameter before ordering.

    What is 162 in steel weight formula?

    The 162 rule gives round steel bar weight as d² ÷ 162 in kg per meter, with d in millimeters. It comes from π ÷ 4 × 7,850 ÷ 1,000,000 = 1 ÷ 162.2.

    A 16 mm bar gives 256 ÷ 162 = 1.58 kg/m, and a 20 mm bar 2.47 kg/m. The formula applies to round bar and rebar only; plate uses thickness × 7.85 kg/m² instead.