Antenna gain calculator for parabolic dishes, beamwidths, apertures and helical antennas: gain in dBi and dBd, power ratio, beamwidth, effective aperture and EIRP with cable losses.
Enter the dish diameter, frequency and aperture efficiency to get the antenna gain in dBi, dBd and as a ratio.
Transmitter, Cable & Noise
Antenna Beam Diagram
Gain by Antenna Size
| Dish Diameter | Width in λ | Gain at η 55% | Half-Power Beamwidth | Far-Field Distance |
|---|---|---|---|---|
| 1.000 ft | 5.897 λ | +22.76 dBi | 11.9° | 11.79 ft |
| 1.500 ft | 8.845 λ | +26.28 dBi | 7.91° | 26.54 ft |
| 2.000 ft · Yours | 11.79 λ | +28.78 dBi | 5.94° | 47.18 ft |
| 3.000 ft | 17.69 λ | +32.30 dBi | 3.96° | 106.1 ft |
| 4.000 ft | 23.59 λ | +34.80 dBi | 2.97° | 188.7 ft |
| 6.000 ft | 35.38 λ | +38.32 dBi | 1.98° | 424.6 ft |
| 8.000 ft | 47.18 λ | +40.82 dBi | 1.48° | 754.8 ft |
| 10.00 ft | 58.97 λ | +42.76 dBi | 1.19° | 1,179 ft |
Antenna dB Gain Chart
| Gain (dBi) | Gain (dBd) | Power Ratio | Range vs Isotropic | EIRP at Your Power |
|---|---|---|---|---|
| 0.00 dBi | -2.15 dBd | 1.000× | 1.00× | +29.00 dBm (794 mW) |
| +2.15 dBi | 0.00 dBd | 1.641× | 1.28× | +31.15 dBm (1.30 W) |
| +3.00 dBi | +0.85 dBd | 1.995× | 1.41× | +32.00 dBm (1.58 W) |
| +5.00 dBi | +2.85 dBd | 3.162× | 1.78× | +34.00 dBm (2.51 W) |
| +6.00 dBi | +3.85 dBd | 3.981× | 2.00× | +35.00 dBm (3.16 W) |
| +8.00 dBi | +5.85 dBd | 6.310× | 2.51× | +37.00 dBm (5.01 W) |
| +9.00 dBi | +6.85 dBd | 7.943× | 2.82× | +38.00 dBm (6.31 W) |
| +10.00 dBi | +7.85 dBd | 10.00× | 3.16× | +39.00 dBm (7.94 W) |
| +12.00 dBi | +9.85 dBd | 15.85× | 3.98× | +41.00 dBm (12.6 W) |
| +15.00 dBi | +12.85 dBd | 31.62× | 5.62× | +44.00 dBm (25.1 W) |
| +18.00 dBi | +15.85 dBd | 63.10× | 7.94× | +47.00 dBm (50.1 W) |
| +20.00 dBi | +17.85 dBd | 100.0× | 10.0× | +49.00 dBm (79.4 W) |
| +24.00 dBi | +21.85 dBd | 251.2× | 15.8× | +53.00 dBm (200 W) |
| +27.00 dBi | +24.85 dBd | 501.2× | 22.4× | +56.00 dBm (398 W) |
| +28.78 dBi · Yours | +26.63 dBd | 755.0× | 27.5× | +57.78 dBm (600 W) |
| +30.00 dBi | +27.85 dBd | 1,000× | 31.6× | +59.00 dBm (794 W) |
| +35.00 dBi | +32.85 dBd | 3,162× | 56.2× | +64.00 dBm (2.51 kW) |
| +40.00 dBi | +37.85 dBd | 10,000× | 100× | +69.00 dBm (7.94 kW) |
Step-by-Step Math
Gain in dB: The Antenna Gain Calculator Formula for dBi and dBd
A 0.61 m (2 ft) dish at 5.8 GHz with 55% aperture efficiency has a gain of 755 as a power ratio, which is 28.78 dBi or 26.63 dBd. Each antenna gain calculator figure says the same thing against a different reference antenna.
Here G is the power ratio against an isotropic antenna, one that radiates equally in every direction. Gain in dBi is that ratio in decibels, so 10 times the power is 10 dBi and 1,000 times is 30 dBi.
A half-wave dipole has a gain of 1.64, or 2.15 dBi, so gain in dBd is the dBi figure minus 2.15. Comparing a datasheet in dBd with one in dBi without that 2.15 dB step makes the dBd antenna look weaker than it is.
| Gain (dBi) | Gain (dBd) | Power ratio | Free-space range vs isotropic |
|---|---|---|---|
| 0 | -2.15 | 1.00x | 1.00x |
| 2.15 (dipole) | 0 | 1.64x | 1.28x |
| 3 | 0.85 | 2.00x | 1.41x |
| 6 | 3.85 | 3.98x | 2.00x |
| 10 | 7.85 | 10.0x | 3.16x |
| 15 | 12.85 | 31.6x | 5.62x |
| 20 | 17.85 | 100x | 10.0x |
| 24 | 21.85 | 251x | 15.8x |
| 30 | 27.85 | 1,000x | 31.6x |
| 35 | 32.85 | 3,162x | 56.2x |
| 40 | 37.85 | 10,000x | 100x |
Every 6 dB of antenna gain doubles the free-space range, because received power falls with the square of distance.
The range column is the square root of the power ratio, with the gain on one end of the link only, the usual antenna gain calculator assumption.
Gain adds straight to transmit power in EIRP. With 1 W (30 dBm) and 1 dB of cable loss, the 28.78 dBi dish radiates 57.78 dBm EIRP, the same peak signal as 600 W into an isotropic antenna, a figure an EIRP calculator checks against legal limits.
Parabolic Dish Gain by Diameter and Band
By parabolic antenna gain calculator math, a dish gains about 6 dB each time its diameter or frequency doubles. At 55% efficiency, a 0.6 m dish reaches 21.0 dBi at 2.4 GHz, 28.6 dBi at 5.8 GHz and 35.0 dBi at 12 GHz.
Here G is the gain ratio, eta is the aperture efficiency as a decimal, D is the dish diameter, and lambda is the wavelength, 299.792458 / f in MHz for meters. The term pi D / lambda is the rim circumference in wavelengths.
| Dish diameter | 2.4 GHz | 5.8 GHz | 11 GHz | 12 GHz (Ku) |
|---|---|---|---|---|
| 0.30 m (0.98 ft) | 15.0 dBi | 22.6 dBi | 28.2 dBi | 28.9 dBi |
| 0.45 m (1.48 ft) | 18.5 dBi | 26.1 dBi | 31.7 dBi | 32.5 dBi |
| 0.60 m (1.97 ft) | 21.0 dBi | 28.6 dBi | 34.2 dBi | 35.0 dBi |
| 0.90 m (2.95 ft) | 24.5 dBi | 32.2 dBi | 37.7 dBi | 38.5 dBi |
| 1.20 m (3.94 ft) | 27.0 dBi | 34.7 dBi | 40.2 dBi | 41.0 dBi |
| 1.80 m (5.91 ft) | 30.5 dBi | 38.2 dBi | 43.7 dBi | 44.5 dBi |
| 2.40 m (7.87 ft) | 33.0 dBi | 40.7 dBi | 46.2 dBi | 47.0 dBi |
| 3.00 m (9.84 ft) | 35.0 dBi | 42.6 dBi | 48.2 dBi | 48.9 dBi |
The 12 GHz column is the satellite antenna gain calculator case for Ku-band TV, where a 0.6 m dish gives about 35 dBi. The same dish on a 2.4 GHz Wi-Fi link gives only 21 dBi, so low-band links need far larger reflectors for the same reach.
Efficiency is the input most antenna gain calculator guesses get wrong. Feed spillover, edge taper and blockage keep real dishes well under 100%, and each 5-point step in efficiency around 55% moves a 0.6 m dish at 5.8 GHz by only about 0.4 dB.
A manufacturer datasheet makes a good antenna gain calculator check. Ubiquiti's RocketDish RD-5G30-LW is 650 mm across with 30 dBi of gain, which works out to an efficiency of 64% at 5.8 GHz and 71% at 5.5 GHz.
The larger RD-5G34 is 1,050 mm across with 34 dBi from 5 to 5.8 GHz, an efficiency of 62% at 5.8 GHz. Both sit above the 55% default, so a 55% figure gives a safe, slightly low estimate for a modern backhaul dish.
Sizing a Dish for a Target Gain
A 30 dBi dish at 5.8 GHz needs a diameter of about 0.70 m (2.30 ft) at 55% efficiency. The same 30 dBi needs 1.70 m at 2.4 GHz and only 0.37 m at 11 GHz, since the required diameter scales with wavelength.
This is the dish formula solved for D, with G as the target gain ratio (10dBi/10), eta as the efficiency and lambda as the wavelength. Any antenna gain calculator target in dBd needs 2.15 dB added first to convert it to dBi.
| Target gain | 2.4 GHz | 5.8 GHz | 11 GHz | 24 GHz |
|---|---|---|---|---|
| 24 dBi | 0.85 m (2.79 ft) | 0.35 m (1.15 ft) | 0.19 m (0.61 ft) | 0.09 m (0.28 ft) |
| 30 dBi | 1.70 m (5.56 ft) | 0.70 m (2.30 ft) | 0.37 m (1.21 ft) | 0.17 m (0.56 ft) |
| 34 dBi | 2.69 m (8.82 ft) | 1.11 m (3.65 ft) | 0.59 m (1.92 ft) | 0.27 m (0.88 ft) |
| 40 dBi | 5.36 m (17.59 ft) | 2.22 m (7.28 ft) | 1.17 m (3.84 ft) | 0.54 m (1.76 ft) |
Each extra 6 dB doubles the diameter and roughly quadruples the wind load and weight. Going from 34 dBi to 40 dBi at 5.8 GHz means a 2.22 m dish instead of 1.11 m, so the last few dB often come cheaper from a higher band or the other end of the link.
The far-field distance grows with diameter too, at 2D2 / lambda. A 0.61 m dish at 5.8 GHz reaches its full antenna gain calculator figure only beyond 14.4 m (47.2 ft), which matters when testing two dishes across a workshop.
Beamwidth and Pointing Tolerance
A 0.61 m dish at 5.8 GHz has a half-power beamwidth of 5.94 degrees, and it must point within 1.71 degrees of the target to stay within 1 dB of peak gain. A higher antenna gain calculator result always means a narrower beam and tighter aiming.
Theta 3dB is the full beamwidth in degrees between the half-power points, lambda is the wavelength and D is the dish diameter. The 1 dB pointing angle is the beamwidth divided by the square root of 12, about 29% of it.
The 70 constant in this antenna gain calculator rule holds up against real hardware, at least for modern backhaul dishes.
It predicts 5.57 degrees for the 650 mm RocketDish at 5.8 GHz against the 5.8 degrees in its specification, and 3.45 degrees for the 1,050 mm model against its rated 3 degrees.
The same link works backward for antennas with no simple aperture, such as sector panels, where an antenna gain calculator works from datasheet beamwidths.
Directivity is roughly 41,253 divided by the product of the two beamwidths in degrees, since a full sphere holds 41,253 square degrees.
D0 is the directivity ratio, and theta E and theta H are the half-power beamwidths in the E-plane and H-plane in degrees. Multiplying by efficiency gives gain, and the Tai-Pereira form, 72,815 / (theta E2 + theta H2), offers a second estimate.
| Beamwidths | Directivity, 41,253 rule | Gain at 55% | Directivity, Tai-Pereira |
|---|---|---|---|
| 5 x 5 degrees | 32.18 dBi | 29.58 dBi | 31.63 dBi |
| 10 x 10 degrees | 26.15 dBi | 23.56 dBi | 25.61 dBi |
| 30 x 30 degrees | 16.61 dBi | 14.02 dBi | 16.07 dBi |
| 60 x 30 degrees | 13.60 dBi | 11.01 dBi | 12.09 dBi |
| 65 x 7 degrees | 19.57 dBi | 16.98 dBi | 12.31 dBi |
| 120 x 8 degrees | 16.33 dBi | 13.74 dBi | 7.02 dBi |
The two rules agree within about 0.6 dB for round beams and split badly for fan beams, where one plane is many times wider than the other.
A 120 x 8 degree sector reads 16.33 dBi by the 41,253 rule and only 7.02 dBi by Tai-Pereira, so for very uneven beams the choice of rule moves the estimate by more than 9 dB.
Omni Gain From Vertical Beamwidth
An omnidirectional antenna's gain depends on how flat its vertical beam is. A half-wave dipole's 78 degree vertical beam gives 2.15 dBi, and a stacked collinear squeezed to a 10 degree beam reaches a directivity of 10.16 dBi.
D0 is the directivity ratio and theta V is the vertical half-power beamwidth in degrees. This is McDonald's approximation, and Pozar's form, -172.4 + 191 x the square root of (0.818 + 1 / theta V), gives a second estimate.
| Vertical beamwidth | McDonald directivity | Pozar directivity | McDonald in dBd |
|---|---|---|---|
| 78 degrees (dipole) | 2.15 dBi | 2.29 dBi | 0.00 dBd |
| 60 degrees | 3.03 dBi | 3.22 dBi | 0.88 dBd |
| 30 degrees | 5.64 dBi | 5.83 dBi | 3.49 dBd |
| 20 degrees | 7.27 dBi | 7.44 dBi | 5.12 dBd |
| 10 degrees | 10.16 dBi | 10.25 dBi | 8.01 dBd |
| 5 degrees | 13.11 dBi | 13.08 dBi | 10.96 dBd |
Radiation efficiency then takes its share, so at 90% the 10 degree collinear drops from 10.16 to 9.70 dBi. The two formulas agree within 0.2 dB across the table, which makes either one a sound omni antenna gain calculator check on a datasheet.
Halving the vertical beamwidth adds about 3 dB, but a very flat beam can pass over users close below a tall mast. A 10 degree beam drops 1 dB only 2.89 degrees off the horizon, so a tilted mount costs real signal at the edge of coverage.
Helical Antennas: Kraus Versus Modeled Gain
A 12-turn axial-mode helix at 5.8 GHz, 0.65 in (16.5 mm) across with 0.5 in (12.7 mm) turn spacing, reads 16.49 dBi by Kraus's formula. Detailed modeling puts its real maximum closer to 13.2 dBi.
Here N is the number of turns, C is the helix circumference, S is the turn spacing, and lambda is the wavelength. The formula assumes a circumference of 0.75 to 1.33 wavelengths, a pitch angle near 12 to 14 degrees and more than 3 turns.
Darrel Emerson of NRAO modeled about 10,000 helices in NEC-2 and found Kraus's formula overestimates gain by up to 4 to 5 dB. His fit gives maximum gain as 10.25 + 1.22L - 0.0726L2 dB, with L the helix length in wavelengths from 2 to 7.
| Turns at 5.8 GHz | Length (wavelengths) | Kraus gain | Emerson maximum | Half-power beamwidth |
|---|---|---|---|---|
| 10 | 2.46 | 15.70 dBi | 12.81 dBi | 33.1 degrees |
| 12 | 2.95 | 16.49 dBi | 13.22 dBi | 30.2 degrees |
| 16 | 3.93 | 17.74 dBi | 13.92 dBi | 26.1 degrees |
| 20 | 4.91 | 18.71 dBi | 14.49 dBi | 23.4 degrees |
| 24 | 5.90 | 19.50 dBi | 14.92 dBi | 21.3 degrees |
The gap widens with length, from 2.9 dB at 10 turns to 4.6 dB at 24 turns, so doubling the turns buys far less than the 3 dB Kraus promises. For a link budget, the Emerson figure is the safer helix antenna gain calculator number.
The classic 2.4 GHz design with a one-wavelength circumference (39.8 mm diameter) and quarter-wave spacing (31.2 mm) has a pitch angle of 14.04 degrees. At 10 turns it reads 15.74 dBi by Kraus and about 12.85 dBi by Emerson's fit.
Aperture Area to Gain for Horns and Panels
Any aperture antenna's gain follows from its area, efficiency and wavelength. A 1 m2 aperture at 12 GHz with 65% efficiency gives 41.17 dBi.
A 0.1 m2 horn mouth at 10 GHz with 51% efficiency gives 28.53 dBi, a typical horn antenna gain calculator case.
A is the physical aperture area, eta is the aperture efficiency, and lambda is the wavelength. The product eta A is the effective aperture, the area that actually collects signal, and the formula works the same for horns, flat panels and dishes.
Turned around, the effective aperture of the 2 ft dish is 1.73 ft2 (0.161 m2) out of a physical area of 3.14 ft2. That 55% share is the efficiency, which links the antenna gain calculator result straight to a received power.
Flat patch arrays fit the same formula once their area and efficiency are known, while a single patch is better handled by a microstrip patch antenna calculator that works from substrate and size.
Satellite ground stations rate dishes by G/T in dB/K, the receive figure of merit. The 2 ft dish at 28.78 dBi and a 150 K system temperature gives 7.02 dB/K, and a 0.6 m Ku-band dish at 35.0 dBi and 100 K gives 15.0 dB/K.
GdBi is the antenna gain calculator result and T is the system noise temperature in kelvin, which an antenna noise temperature calculator builds from sky, ground and receiver noise.
Isotropic Reference and Lossless Gain
Two questions sit under every gain figure: what the number is measured against, and how much the antenna loses along the way. The answers below use the same 0.61 m, 5.8 GHz dish.
What is antenna gain?
Antenna gain is how much stronger an antenna radiates in its best direction than an isotropic antenna fed with the same power.
A gain of 28.78 dBi means 755 times the power density along the beam, taken from directions where the antenna radiates less.
Gain does not create power. A dish adds no watts to the transmitter but concentrates them, so the 755-fold boost along the 5.94 degree beam is power missing from every other direction.
How do you calculate a lossless antenna?
A lossless antenna has a gain equal to its directivity, which is the antenna gain calculator figure at 100% efficiency.
The 0.61 m dish at 5.8 GHz would then reach 31.38 dBi instead of 28.78 dBi, the 2.60 dB gap being the 55% aperture efficiency.
For a dish the lossless figure is (pi D / lambda)2, and for any beam it is 41,253 divided by the two beamwidths. A lossless half-wave dipole is 1.64, or 2.15 dBi, the reference a dipole antenna length calculator design starts from.