Landscape rock calculator for cubic yards, tons and bags from area or wall size, depth and rock weight, covering beds, circles, triangles, wall backfill and bulk against bag costs.
Measure the bed, then enter how deep you want the rock layer.
Landscape Rock Price and Bags
Rock Bed Diagram
Landscape Rock by Depth
| Rock Depth (Use) | Volume | Weight | Bags | Bulk Delivered |
|---|---|---|---|---|
| 2 in (Pea Gravel, River Rock Minimum) | 1.70 cu yd | 2.04-2.38 tons | 92 | $178.36 |
| 3 in (Most Rock Beds) | 2.55 cu yd | 3.06-3.56 tons | 138 | $225.05 |
| 4 in (Large Rock, Weed Control) | 3.40 cu yd | 4.07-4.75 tons | 184 | $271.73 |
| 6 in (Deep Decorative Layer) | 5.09 cu yd | 6.11-7.13 tons | 275 | $365.09 |
Step-by-Step Landscape Rock Math
Area25 ft × 10 ft = 250.00 sq ft
Volume before extra250.00 sq ft × (3 in ÷ 12) = 62.50 cu ft
Volume to order62.5000 cu ft × 1.1 = 68.75 cu ft ÷ 27 = 2.55 cu yd
Weight, low end2.5463 cu yd × 2,400 lb = 3.06 tons
Weight, high end2.5463 cu yd × 2,800 lb = 3.56 tons
Bags68.7500 cu ft ÷ 0.5 cu ft = 137.50, rounded up to 138 × $6 = $828.00
Bulk delivered2.5463 cu yd × $55 + $85.00 delivery = $225.05
Landscape Rock Calculator Formula With a 100 Sq Ft Check
A 25 × 10 ft bed covered 3 in deep needs 2.55 cu yd of rock with 10% extra. In decorative rock that is about 3.1 to 3.6 tons, so a landscape rock calculator yards total and a tons total both matter when ordering.
V is the volume in cubic yards, A is the area in square feet, d is the rock depth in inches and e is the extra percent for settling and gaps. Dividing by 12 turns inches into feet, and 27 turns cubic feet into yards.
For the 25 × 10 ft bed, 250 sq ft times 0.25 ft gives 62.5 cu ft. The 10% extra makes 68.75 cu ft, and 68.75 ÷ 27 is the 2.55 cu yd order.
| 100 sq ft at | Cubic yards (+10%) | 0.5 cu ft bags | Tons at 2,600 lb/cu yd |
|---|---|---|---|
| 2 in | 0.68 | 37 | 0.88 |
| 3 in | 1.02 | 55 | 1.32 |
| 4 in | 1.36 | 74 | 1.77 |
A round bed uses pi times the radius squared for its area. A 10 ft circle covers 78.5 sq ft, so at 4 in a landscape rock calculator cubic yards figure is 0.97 net and 1.07 with 10% extra. One supplier's published example lists 0.77 for that same bed.
For a landscape rock calculator in metric, an 8 × 3 m bed at 7.5 cm holds 1.8 m³ of rock, or 1.98 m³ with the allowance. At 1,543 kg/m³ for decorative rock, that is about 3.05 tonnes.
Rock Weight by Type, From Pea Gravel to River Rock
A cubic yard of landscape rock weighs 2,400 to 3,500 lb depending on the stone. Decorative rock sits at the light end near 1.3 tons per yard, while river rock spans 1.2 to 1.75 tons.
| Rock type | lb per cu yd | Tons per cu yd | lb/ft³ | kg/m³ |
|---|---|---|---|---|
| Decorative rock | 2,400-2,800 | 1.20-1.40 | 88.9-103.7 | 1,424-1,661 |
| Pea gravel | 2,800-3,200 | 1.40-1.60 | 103.7-118.5 | 1,661-1,898 |
| Washed gravel | 2,800-3,200 | 1.40-1.60 | 103.7-118.5 | 1,661-1,898 |
| Crushed stone | 2,700-3,400 | 1.35-1.70 | 100-125.9 | 1,602-2,017 |
| River rock | 2,400-3,500 | 1.20-1.75 | 88.9-129.6 | 1,424-2,076 |
| Decomposed granite | 3,000 | 1.50 | 111.1 | 1,780 |
Decorative rock, river rock and decomposed granite figures come from Roseville Landscape Material Supply. Pea gravel, washed gravel and crushed stone come from Stone Center, an Ohio stone supplier.
The two suppliers disagree on river rock, with Roseville at 2,400 to 2,600 lb and Stone Center at 2,800 to 3,500, so that row spans both.
The Rockland Weights of Materials chart agrees, putting dry ¼ to 2 in gravel at 2,835 lb per yard and crushed stone at 2,700.
The density behind any landscape rock calculator weight is the rock's weight divided by its volume. A 5-gallon bucket holds 0.668 cu ft, so 58 lb of rock in a level bucket means 86.8 lb/ft³, or about 2,343 lb per cubic yard.
That measured figure sits below the decorative rock range, which would over-order the weight by about 11% at the 2,600 lb midpoint. Lava rock is porous and lighter still, so weigh a bucket or get the yard's own figure before ordering it by the ton.
The Pea Gravel Calculator, River Rock Calculator and Crushed Stone Calculator each carry those single stone types in more detail.
Area One Ton Covers at 2, 3 and 4 Inches
One ton of decorative rock covers about 83 sq ft at 3 in deep, while a ton of crushed stone covers about 71 sq ft. Heavier stone fills less space per ton, so a landscape rock calculator tons figure changes with the rock.
| Rock type (midpoint weight) | At 2 in | At 3 in | At 4 in |
|---|---|---|---|
| Decorative rock (2,600 lb/cu yd) | 124.6 sq ft | 83.1 sq ft | 62.3 sq ft |
| River rock (2,950) | 109.8 sq ft | 73.2 sq ft | 54.9 sq ft |
| Pea or washed gravel (3,000) | 108.0 sq ft | 72.0 sq ft | 54.0 sq ft |
| Crushed stone (3,050) | 106.2 sq ft | 70.8 sq ft | 53.1 sq ft |
A landscape rock calculator cubic feet total converts the same way for every stone, since one cubic yard covers 108 sq ft at 3 in. The often-quoted "about 100 sq ft" is close only after a 10% allowance, which brings it to 98 sq ft.
A landscape rock calculator square feet check runs both ways. Divide the bed area by the coverage figure for tons, or by 108 for cubic yards at 3 in, then add the allowance on top.
Minimum Depths by Rock and Use
Pea gravel and river rock need at least 2 in to hide the ground below, and paver base goes down 4 to 6 in. These minimums come from Stone Center's supplier guidance and set the floor for any landscape rock calculator depth.
| Use | Depth | Cu yd per 100 sq ft (+10%) |
|---|---|---|
| Concrete sand over paver base | 1 in | 0.34 |
| Decorative pea gravel or river rock | 2 in minimum | 0.68 |
| Decomposed granite path | 2 in minimum | 0.68 |
| Decomposed granite driveway | 4 in minimum | 1.36 |
| Crushed limestone or paver base | 4-6 in | 1.36-2.04 |
A deeper layer for weed control is a cost decision, not a free upgrade. Going from 3 in to 4 in adds a third more rock, which on the 25 × 10 ft bed is 0.85 cu yd extra.
A french drain trench 6 in wide and 12 in deep takes 0.20 cu yd of washed gravel per 10 ft with the allowance. The Decomposed Granite Calculator and Paver Base Calculator size those compacted layers.
Retaining Wall Backfill per Foot of Wall
A 3 ft retaining wall with a 12 in backfill zone takes 0.122 cu yd of drainage rock per foot of wall, or 1.22 cu yd per 10 ft with 10% extra. Wall height drives the order more than wall length does.
Allan Block's construction guide runs the wall rock column 12 in deep behind the facing. It calls for 0.25 to 1.5 in well-graded aggregate with no more than 10% passing the #200 sieve.
| Wall height | Cu yd per ft of wall | Per 10 ft | 30 ft wall | 30 ft wall in washed gravel |
|---|---|---|---|---|
| 2 ft | 0.081 | 0.81 cu yd | 2.44 cu yd | 3.42-3.91 tons |
| 3 ft | 0.122 | 1.22 cu yd | 3.67 cu yd | 5.13-5.87 tons |
| 4 ft | 0.163 | 1.63 cu yd | 4.89 cu yd | 6.84-7.82 tons |
A landscape rock calculator for retaining walls covers the backfill only. Allan Block leaves embedment depth and reinforcement grid length to the wall design engineer, so taller walls need that design before any rock order.
Bulk Rock Against 0.5 Cu Ft Bags
Bagged rock wins only on tiny jobs. At $6 per 0.5 cu ft bag, rock costs $324 per cubic yard, so against $55 per yard plus an $85 delivery fee, bags stay cheaper only below about 0.32 cu yd, roughly 18 bags.
For the 25 × 10 ft bed at 3 in, the landscape rock calculator count is 138 bags, $828 in total, against $225.05 delivered in bulk. Bulk works out to $0.90 per sq ft of finished bed, so the gap widens with every extra yard.
One cubic yard equals 54 bags of 0.5 cu ft, the size most home centers stock. For a landscape rock calculator Home Depot comparison, multiply the shelf price by 54 to get the per-yard cost, then set it against a bulk quote.
Price per Yard and per Ton, Converted
A quote per ton and a quote per yard only compare after a weight conversion. At 3,000 lb per yard, $45 per ton equals $67.50 per cubic yard of pea gravel, which beats a $70 per yard quote by only $2.50.
| Rock type | Midpoint lb per cu yd | $55/cu yd as $/ton | $45/ton as $/cu yd |
|---|---|---|---|
| Decorative rock | 2,600 | $42.31 | $58.50 |
| River rock | 2,950 | $37.29 | $66.38 |
| Pea or washed gravel | 3,000 | $36.67 | $67.50 |
| Crushed stone | 3,050 | $36.07 | $68.63 |
The prices are sample figures, so a landscape rock price list from a local yard goes into the same conversion. Heavy stone looks cheap per ton and costly per yard, and the yard is what covers the ground.
Wet stone adds weight without adding coverage. A per-ton landscaping rock cost per yard rises with moisture, while a per-yard quote stays fixed, so wet loads favor buying by volume.
Fabric, Waste and Stone-Versus-Mulch Answers
Each answer uses the landscape rock calculator example of a 25 × 10 ft bed at 3 in, 250 sq ft in all, unless it names another size, depth or price.
Do I need to order extra landscape rock for waste?
Order 5% to 10% extra, since rock settles into soil and fills dips on uneven ground. The 25 × 10 ft bed at 3 in needs 2.31 cu yd net, 2.43 at 5%, 2.55 at 10% and 2.66 at 15%.
Lean toward a 10% landscape rock calculator allowance on soft or uneven ground and 5% on a flat, firm bed. Running short costs another delivery fee, which at $85 is more than the 0.12 cu yd difference between 5% and 10% at $55 per yard.
Do I need landscape fabric under rock?
Fabric is worth it under decorative rock on soil, because it stops the stone from working down into the dirt. A 3 in bed that sinks ½ in loses a sixth of its depth, or 0.39 cu yd of rock over 250 sq ft.
Fabric does not stop weeds that sprout in dust and leaves on top of the rock. Paths and driveways go on a compacted base instead, with crushed limestone or paver base laid 4 to 6 in deep under the surface stone.
Is landscape stone better than mulch?
Stone lasts, while organic mulch breaks down and needs a fresh 2 to 3 in layer every year or two, per Clemson Extension. Clemson also notes that rock holds heat and raises ground temperature around plants.
The same landscape rock calculator example costs $225.05 in bulk rock, against $161.84 in mulch at $40 per yard plus $60 delivery. The Mulch Calculator runs the mulch side for beds near heat-sensitive plants.