Noise Reduction Coefficient Calculator

Updated

Noise reduction coefficient calculator for NRC from 250 to 2000 Hz absorption bands, plus αw class, sabins, bass balance, room reverb time and the panel area that reaches a target.

Quick Setup

Enter the octave-band absorption coefficients from the product data sheet.

ft
ft
ft
sq ft
Extra Bands, Area6 bands, 100 sq ft
sq ft
Placement and TargetWalls, 0.60 s
s
Noise Reduction Coefficient (NRC)
0.75 NRC Rating
Takes in about 73% of the speech-range sound that strikes it
0.725 Unrounded Average
Sum of Four Bands2.900
Changed by Rounding+0.025
NRC is the plain average of the 250, 500, 1000 and 2000 Hz coefficients, rounded to the nearest 0.05. Ties at the halfway point round up.
αw 0.70 Weighted Rating
ISO Absorption ClassClass C
Shape IndicatorNone
Weighted coefficient from the 250 to 4000 Hz bands, as used for ISO absorption classes A to E. Letters mark bands that absorb well above the curve.
72.5 sabins on 100 sq ft
Weakest Band (125 Hz)15.0 sabins
Strongest Band (1000 Hz)90.0 sabins
Absorption the material adds to a room, using the four-band average. One sabin equals one unit of area that takes in all the sound striking it.
Stronger on Treble Than Bass
Bass Bands (125-250 Hz)0.30 α
Treble Bands (2-4 kHz)0.85 α
NRC leaves out 125 Hz and 4000 Hz, so a thin panel can score well yet do little for bass. Compare these two band averages before buying.
Weak Bass Absorption
At 125 Hz this material takes in 0.15, well under half its NRC. For music rooms, home theaters or HVAC rumble, add thicker panels or bass traps.
Absorption by Band125 to 4000 Hz
0.000.250.500.751.001252505001k2k4kHz0.150.450.650.900.900.80
NRC bandsOutside NRCNRC 0.75αw 0.70 curve
Step-by-Step MathWith your numbers
  1. Practical α (nearest 0.05, max 1.00) at 250, 500, 1000, 2000, 4000 Hz: 0.45, 0.65, 0.90, 0.90, 0.80
  2. Reference curve shifted to αw 0.70: 0.50, 0.70, 0.70, 0.70, 0.60. Shortfall below the curve = 0.10 (limit 0.10), so αw = 0.70, Class C
  3. Sabins = area × average α = 100 × 0.7250 = 72.5 sabins
  4. Sum = 0.45 + 0.65 + 0.9 + 0.9 = 2.900
  5. Average = 2.900 ÷ 4 = 0.7250
  6. NRC = 0.7250 rounded to the nearest 0.05 = 0.75

Noise Reduction Coefficient Calculator: Four Bands, One Number

NRC is the average of a material's sound absorption coefficients at 250, 500, 1000 and 2000 Hz, rounded to the nearest 0.05. A panel tested at 0.45, 0.65, 0.90 and 0.90 averages 0.725 and rates NRC 0.75.

The four bands and the 0.05 rounding come from ASTM C423, the reverberation-room test, as summarized by the testing lab Intertek. Any noise reduction coefficient calculator result has to follow that rule to match a data sheet.

In noise reduction coefficient calculator math, each α is the share of striking sound a surface takes in at one band. An α of 0.65 at 500 Hz means 65% of that sound is not sent back into the room.

Because rounding goes to the nearest multiple of 0.05, a noise reduction coefficient calculator rating can sit up to 0.025 away from the true average. A tie such as 0.725 or 0.575 rounds up, to 0.75 and 0.60.

Bands at 250, 500, 1000, 2000 HzSumAverageNRCMoved by rounding
0.29, 0.66, 0.80, 0.892.640.66000.65-0.0100
0.45, 0.65, 0.90, 0.902.900.72500.75+0.0250
0.35, 0.55, 0.70, 0.702.300.57500.60+0.0250
0.26, 0.70, 1.01, 1.073.040.76000.75-0.0100
0.78, 1.06, 1.13, 1.064.031.00751.00-0.0075

Recomputing from rounded data-sheet values can land one step off. Owens Corning lists its 2 in Type 706 board at NRC 1.05, yet its printed bands average 1.0075, which rounds to 1.00, most likely because the lab averages unrounded data.

When a noise reduction coefficient calculator result and a data sheet disagree by exactly 0.05, quote the data-sheet NRC. Use the recomputed number only to compare products tested the same way.

Absorption Coefficient Table for Tested Boards

Unfaced fiberglass board 1 in thick rates NRC 0.75, and 2 in rates NRC 1.05, in the Owens Corning Type 706 and 707 data sheet. Both were tested to ASTM C423 in Type A mounting, flat against a solid backing.

The bands below are the published sound absorption coefficient table for those boards, ready for any noise reduction coefficient calculator check. The same rows feed the bass and αw figures further down.

BoardThickness125 Hz250 Hz500 Hz1000 Hz2000 Hz4000 HzListed NRC
Type 7061 in (25 mm)0.010.220.670.971.051.060.75
Type 7071 in (25 mm)0.040.260.701.011.071.060.75
Type 7062 in (50 mm)0.190.781.061.131.061.121.05
Type 7072 in (50 mm)0.160.821.151.111.031.071.05

Doubling the thickness lifts the 250 Hz value of Type 706 from 0.22 to 0.78, while 2000 Hz barely moves. Depth buys low-frequency absorption, and that is where nearly all of the NRC gain from 0.75 to 1.05 comes from.

High-NRC options therefore come down to porous material and depth. For a noise reduction coefficient calculator check on any product, use its own tested bands, since NRC shifts with thickness, facing and mounting.

Bass Bands Left Out of NRC

NRC skips 125 Hz and 4000 Hz, so a board can score 0.75 while taking in almost no bass. The 1 in Type 706 board absorbs 0.01 at 125 Hz, against 0.19 for the 2 in version of the same product.

Three materials below share NRC 0.75, yet their bass average ranges from 0.12 to 0.30. A noise reduction coefficient calculator for audio rooms is only half the answer until the 125 Hz band is checked too.

MaterialNRCBass average, 125 and 250 HzTreble average, 2000 and 4000 Hzαw and class
Type 706, 1 in0.750.121.060.50 (MH), Class D
Type 707, 1 in0.750.151.070.55 (MH), Class D
Lab-tested panel0.750.300.850.70, Class C
Type 706, 2 in1.050.491.091.00, Class A
Type 707, 2 in1.050.491.051.00, Class A

For home theaters, music rooms and HVAC rumble, compare the 125 and 250 Hz average before any noise reduction coefficient calculator rating. The lab-tested panel carries more than twice the bass absorption of the 1 in board at the same rating.

Speech rooms such as offices and classrooms care most about 500 to 2000 Hz, so a noise reduction coefficient calculator result tracks them well. A 1 in board with NRC 0.75 does its job, since its 1000 and 2000 Hz values sit at or above 0.97.

Sound Absorption Average and αw Next to NRC

One panel can carry three different single numbers. An ISO 11654 test report for a panel with bands of 0.15, 0.45, 0.65, 0.90, 0.90 and 0.80 lists NRC 0.75, SAA 0.72 and αw 0.70, Class C.

SAA, the sound absorption average, uses the twelve one-third-octave bands from 200 to 2500 Hz, rounded to 0.01 per ASTM C423. Four octave values cannot rebuild it, so data sheets print it on its own line.

αw is the international rating from ISO 11654, used outside North America. It starts from practical coefficients αp, which are each octave band rounded to the nearest 0.05 and capped at 1.00.

A reference curve of 0.80 at 250 Hz, 1.00 from 500 to 2000 Hz and 0.90 at 4000 Hz then moves down in 0.05 steps. It stops once the bands falling below it add up to no more than 0.10, and αw is its value at 500 Hz.

The test report's panel works out like this. The curve settles 0.30 down, two bands fall 0.05 short, and the total shortfall of 0.10 sets αw at 0.70, matching the published rating exactly.

BandPractical αpShifted curveShortfall below curve
250 Hz0.450.500.05
500 Hz0.650.700.05
1000 Hz0.900.700
2000 Hz0.900.700
4000 Hz0.800.600

ISO classes follow αw, with A at 0.90 to 1.00, B at 0.80 to 0.85, C at 0.60 to 0.75, D at 0.30 to 0.55 and E at 0.15 to 0.25. A letter L, M or H marks a band that beats the shifted curve by 0.25 or more.

The 1 in Type 706 board shows why the two systems disagree. It rates NRC 0.75 but only αw 0.50 (MH), Class D, because its weak 250 Hz value pulls the whole curve down while its upper bands sit far above it.

Class A to E labels belong to αw only. Lists that grade NRC 0.90 to 1.00 as Class A borrow the ISO letters for a different number, so check which rating a spec asks for before comparing it with a noise reduction coefficient calculator figure.

Room Noise Reduction in dB From Panels

Adding 48 sq ft (4.5 m²) of NRC 0.80 panels to a bare 20 × 16 × 9 ft room lowers reflected sound by 1.0 dB. It also cuts the reverb time from 0.98 s to 0.78 s, a 20% drop that is easier to hear than the 1 dB.

NR is the drop in reverberant level in dB, and A1 and A2 are room absorption before and after, in sabins. Each surface adds its area times its NRC, the noise reduction coefficient calculator rating from the bands.

One sabin is 1 sq ft of perfect absorber. Panels replace the wall or ceiling they cover, so they add only their area times the panel NRC minus the surface NRC. With walls at 0.05, each square foot of 0.80 panel adds 0.75 sabins, not 0.80.

RT60 is the Sabine reverb time in seconds, V is room volume in cubic feet and A is total absorption in sabins. In metric units the constant becomes 0.161, with V in cubic meters and A in square-meter sabins.

The bare room has ceiling and walls at NRC 0.05 and floor at 0.30, which gives 320 × 0.05 + 648 × 0.05 + 320 × 0.30 = 144.4 sabins. Its reverb time is 0.049 × 2,880 ÷ 144.4 = 0.98 s.

Panel areaTotal absorptionRT60Quieter byRoom average NRC
0 sq ft (0.0 m²)144.4 sabins (13.4 m² sabins)0.98 s0.0 dB0.112
48 sq ft (4.5 m²)180.4 sabins (16.8 m² sabins)0.78 s1.0 dB0.140
100 sq ft (9.3 m²)219.4 sabins (20.4 m² sabins)0.64 s1.8 dB0.170
150 sq ft (13.9 m²)256.9 sabins (23.9 m² sabins)0.55 s2.5 dB0.199
200 sq ft (18.6 m²)294.4 sabins (27.4 m² sabins)0.48 s3.1 dB0.229
300 sq ft (27.9 m²)369.4 sabins (34.3 m² sabins)0.38 s4.1 dB0.287

Doubling absorption gives about 3 dB, so loudness falls slowly as panels go up. The 300 sq ft row has 2.56 times the bare room's absorption and is 4.1 dB quieter, while its reverb time is 61% shorter.

There is no fixed NRC to dB conversion. The drop depends on the absorption panels add compared with what the room already has, the A2 ÷ A1 ratio, not on any single noise reduction coefficient calculator rating.

Any noise reduction calculator built on Sabine reads long once the room average NRC passes about 0.30. Every row above stays under 0.29, so these reverb times hold, but very dead rooms will measure shorter.

In any noise reduction coefficient calculator plan, the largest surface usually matters most. Swapping the painted ceiling for acoustic tile at NRC 0.55 brings the same bare room to 0.46 s on its own, before a single wall panel goes up.

Panel Area for a 0.6 Second Classroom Target

A 20 × 16 × 9 ft room needs about 121 sq ft (11.2 m²) of NRC 0.80 wall panels to reach 0.6 s. That noise reduction coefficient calculator figure comes from rearranging the Sabine formula for the absorption the target calls for.

The 0.6 s goal comes from ANSI S12.60, which caps reverb at 0.6 s in furnished classrooms under 10,000 ft³ (283 m³) and 0.7 s from 10,000 to 20,000 ft³, as Armstrong summarizes.

Spanel is the panel area, T is the target reverb time and A1 is the room's absorption before treatment. The bottom line is the gain per square foot, since panels cover a surface that already absorbs a little.

Bigger rooms need a far larger share of their surfaces treated. Every room below starts with painted walls and ceiling at 0.05 and a floor at 0.30, with NRC 0.80 panels on either the walls or the ceiling.

RoomVolumeRT60 beforeWall panels neededCeiling panels needed
12 × 10 × 8 ft (3.7 × 3.0 × 2.4 m)960 ft³ (27 m³)0.79 s25 sq ft, 7% of walls25 sq ft, 21% of ceiling
20 × 16 × 9 ft (6.1 × 4.9 × 2.7 m)2,880 ft³ (82 m³)0.98 s121 sq ft, 19% of walls121 sq ft, 38% of ceiling
30 × 25 × 10 ft (9.1 × 7.6 × 3.0 m)7,500 ft³ (212 m³)1.16 s393 sq ft, 36% of walls393 sq ft, 52% of ceiling
32 × 28 × 11 ft (9.8 × 8.5 × 3.4 m)9,856 ft³ (279 m³)1.27 s567 sq ft, 43% of walls567 sq ft, 63% of ceiling

The 32 × 28 × 11 ft room sits just under the 10,000 ft³ line, so it still owes 0.6 s and needs 43% of its walls covered. Putting the panels on the ceiling instead covers 63% of it, which is why classrooms start with an acoustic tile ceiling.

A higher noise reduction coefficient calculator rating changes the area you buy, not the result. For the same 20 × 16 × 9 ft room, moving from NRC 0.80 to 1.00 panels cuts the area by 21%, while dropping to 0.50 needs 67% more.

Panel NRCPanel area for 0.6 sShare of wall area
0.50201.8 sq ft (18.7 m²)31.1%
0.65151.3 sq ft (14.1 m²)23.4%
0.75129.7 sq ft (12.1 m²)20.0%
0.80121.1 sq ft (11.2 m²)18.7%
1.0095.6 sq ft (8.9 m²)14.7%

NRC Values Explained, From 0.75 to 1.05

These answers use the same tested boards and room as above, so each noise reduction coefficient calculator figure can be checked against a real data sheet or a worked room.

What is an NRC rating and what does it stand for?

NRC stands for Noise Reduction Coefficient, a single number for how much speech-range sound a surface absorbs instead of reflecting. It runs from 0.00, a fully reflective surface like sealed concrete, to about 1.00 for a thick porous panel.

The noise reduction coefficient calculator rating follows the ASTM C423 average of the 250 to 2000 Hz bands. It describes echo control inside a room and holds only for the mounting tested, since an air gap or facing changes the bands.

What is a good NRC value?

A good NRC is the one that reaches your room's reverb target with the area you can cover. In the 20 × 16 × 9 ft room, NRC 0.75 panels need 129.7 sq ft for 0.6 s, against 121.1 sq ft at 0.80, so 0.75 is a sound choice there.

Lower ratings cost wall space fast. NRC 0.50 panels need 201.8 sq ft, nearly a third of the walls, so each step below 0.75 costs wall area quickly in a speech room.

For music or home theater, a noise reduction coefficient calculator result alone cannot say whether a panel is good. Check the 125 Hz value too, since a 1 in board at NRC 0.75 absorbs only 0.01 there.

What does 0.95 Noise Reduction Coefficient mean?

An NRC of 0.95 means the four speech bands average between 0.925 and just under 0.975, so the surface takes in about 95% of the speech-range sound that strikes it.

A noise reduction coefficient calculator rating of 0.90 covers averages from 0.875 to just under 0.925, so a surface at NRC 0.90 takes in roughly 90% of that sound.

Both sit near the top of the scale, yet the 250 Hz band still decides bass control. Check αw or the band list, since the 1 in board dropped from NRC 0.75 to αw 0.50 on that band alone.

What does an NRC of 1.05 mean?

An NRC of 1.05 is a lab result above 1.00, which happens because a test sample also takes in sound along its exposed edges. The 2 in Owens Corning boards rate 1.05 for this reason, with single bands up to 1.15.

No panel absorbs more sound than strikes it, so cap each band at 1.00 when turning a noise reduction coefficient calculator rating into room absorption. For 100 sq ft of the 2 in Type 707 board, that gives 95.5 sabins instead of the raw 102.8.

What is the difference between an NRC and STC rating?

NRC rates how much sound a surface soaks up inside a room, while STC rates how much a wall or floor blocks sound passing to the next room. A soft panel with NRC 1.00 does little for STC, and a sealed concrete wall with high STC has an NRC near 0.

Use a noise reduction coefficient calculator to fix echo and loudness within a space, and a transmission rating to stop noise between spaces. The Sound Reduction Index Calculator covers the blocking side for walls and panels.