Scale Conversion Calculator

Updated

Scale conversion calculator ratios move lengths between 1:24 and 1:48, plans and site, or real size and HO, then turn that change into percentages, squared areas and cubed volumes.

Scale Conversion Setup

Use 1 for real size; for an enlargement such as 2:1, type 0.5.

Inch Fraction PrecisionNearest 1/16 in
Real Size → 1/4 in = 1 ft
6 in Scaled Length
From 24 ft × 1 ÷ 48
2.0833% Scale Percentage
Decimal Factor0.0208333
Resize Back By4,800%
Type the scale percentage into a copier, slicer or CAD scale box to resize the whole drawing or model.
15.24 cm Metric Length
In Millimeters152.4 mm
In Feet0.5 ft
The same scaled result in other units, so any tape, ruler or caliper you own can check it.
1/4 in = 1 ft Drawing Scale
1 in Represents4 ft
1 cm Represents0.48 m
How to read the drawing scale: one unit measured on paper or model stands for this much real size.
2,304× Smaller Area
Volume Change110,592× smaller
Volume Percentage0.00090422%
Areas change by the square of the scale and volumes by the cube, which drives paint, filament and weight.
Graphic Scale Bar1/4 in = 1 ft
0014 ft28 ft312 ft416 ft520 ft6 in24 ftTop: in on the drawing or model · Bottom: real size at 1 : 48
Scale Conversion Chart54 scales
ScaleRatioSize %24 ft at Scale6 ft Person
Real Size1 : 1100%288 in72 in
1:21 : 250%144 in36 in
3 in = 1 ft1 : 425%72 in18 in
1:51 : 520%57 5/8 in14 3/8 in
1:6 figure1 : 616.667%48 in12 in
1 1/2 in = 1 ft1 : 812.5%36 in9 in
1:101 : 1010%28 13/16 in7 3/16 in
1 in = 1 ft1 : 128.3333%24 in6 in
3/4 in = 1 ft1 : 166.25%18 in4 1/2 in
1:18 diecast1 : 185.5556%16 in4 in
1:201 : 205%14 3/8 in3 5/8 in
G scale1 : 22.54.4444%12 13/16 in3 3/16 in
1/2 in = 1 ft1 : 244.1667%12 in3 in
1:251 : 254%11 1/2 in2 7/8 in
3/8 in = 1 ft1 : 323.125%9 in2 1/4 in
1:35 military1 : 352.8571%8 1/4 in2 1/16 in
1:43 diecast1 : 432.3256%6 11/16 in1 11/16 in
1/4 in = 1 ft1 : 482.0833%6 in1 1/2 in
1:501 : 502%5 3/4 in1 7/16 in
28 mm heroic1 : 561.7857%5 1/8 in1 5/16 in
D&D 1 in = 5 ft1 : 601.6667%4 13/16 in1 3/16 in
3/16 in = 1 ft1 : 641.5625%4 1/2 in1 1/8 in
1:72 aircraft1 : 721.3889%4 in1 in
1:751 : 751.3333%3 13/16 in15/16 in
OO scale1 : 76.21.3123%3 3/4 in15/16 in
HO scale1 : 87.11.1481%3 5/16 in13/16 in
1/8 in = 1 ft1 : 961.0417%3 in3/4 in
1:1001 : 1001%2 7/8 in3/4 in
1 in = 10 ft1 : 1200.83333%2 3/8 in5/8 in
3/32 in = 1 ft1 : 1280.78125%2 1/4 in9/16 in
1:144 micro1 : 1440.69444%2 in1/2 in
N scale1 : 1600.625%1 13/16 in7/16 in
1/16 in = 1 ft1 : 1920.52083%1 1/2 in3/8 in
1:2001 : 2000.5%1 7/16 in3/8 in
Z scale1 : 2200.45455%1 5/16 in5/16 in
1 in = 20 ft1 : 2400.41667%1 3/16 in5/16 in
1:2501 : 2500.4%1 1/8 in5/16 in
1:350 ship1 : 3500.28571%13/16 in3/16 in
1 in = 30 ft1 : 3600.27778%13/16 in3/16 in
1 in = 40 ft1 : 4800.20833%5/8 in1/8 in
1:5001 : 5000.2%9/16 in1/8 in
1 in = 50 ft1 : 6000.16667%1/2 in1/8 in
1:700 ship1 : 7000.14286%7/16 in1/8 in
1 in = 60 ft1 : 7200.13889%3/8 in1/8 in
1:10001 : 1,0000.1%5/16 in1/16 in
1 in = 100 ft1 : 1,2000.083333%1/4 in1/16 in
1:12501 : 1,2500.08%1/4 in1/16 in
1:25001 : 2,5000.04%1/8 inunder 1/16 in
1:50001 : 5,0000.02%1/16 inunder 1/16 in
1:10,0001 : 10,0000.01%under 1/16 inunder 1/16 in
1:24,000 topo map1 : 24,0000.0041667%under 1/16 inunder 1/16 in
1:25,000 map1 : 25,0000.004%under 1/16 inunder 1/16 in
1:50,000 map1 : 50,0000.002%under 1/16 inunder 1/16 in
1:100,000 map1 : 100,0000.001%under 1/16 inunder 1/16 in
Step-by-Step Scale Math3 steps
Target unit24 ft = 288 in
Scale factor1 ÷ 48 = 0.0208333 (2.0833%)
Converted length288 in × 1 ÷ 48 = 6 in
Bigger Number, Smaller Copy
A larger number after the colon means a smaller copy, so every length at 1:48 is 2.0833% of real size.

Scale Conversion Calculator Math, One Scale to Another

In scale conversion calculator math, a length at one scale converts to another by multiplying by the first scale number and dividing by the second. A 10 in part at 1:24 becomes 10 × 24 ÷ 48 = 5 in at 1:48.

L₁ is the length at the starting scale, N₁ is the number after the colon in that scale, and N₂ is the number in the new scale. Real size counts as 1:1, so N₁ = 1 for a real measurement.

Starting LengthFromToFactorResult
10 in1:241:480.55 in
10 in1:481:24220 in
6 in1:721:481.59 in
200 mmHO 1:87.1N 1:1600.544375108.875 mm
250 mm1:351:720.486111121.528 mm
300 mm1:721:352.05714617.143 mm
40 ft real1:1HO 1:87.10.01148115.51 in

Units must match before the ratio does anything. The 40 ft boxcar is 480 in before it is divided by 87.1, which is why any scale conversion calculator result in inches to cm needs one unit converted first.

From real size to a model, the scale conversion formula is a single division, real ÷ N. Going from a model back to real size is a single multiplication, model × N, so a 6 in wall at 1:48 is 288 in, or 24 ft.

Architectural and Engineering Drawing Scales

An architectural scale names how many inches on paper stand for one foot. 1/4 in = 1 ft is 1:48 because 12 ÷ 0.25 = 48, and every row below follows the same rule.

Drawing ScaleRatio1 in on Paper Equals1 cm on Paper Equals24 ft Wall on Paper
3 in = 1 ft1:44 in4 cm72 in
1 1/2 in = 1 ft1:88 in8 cm36 in
1 in = 1 ft1:121 ft12 cm24 in
3/4 in = 1 ft1:161.333 ft16 cm18 in
1/2 in = 1 ft1:242 ft24 cm12 in
3/8 in = 1 ft1:322.667 ft32 cm9 in
1/4 in = 1 ft1:484 ft48 cm6 in
3/16 in = 1 ft1:645.333 ft64 cm4 1/2 in
1/8 in = 1 ft1:968 ft96 cm3 in
3/32 in = 1 ft1:12810.67 ft1.28 m2 1/4 in
1/16 in = 1 ft1:19216 ft1.92 m1 1/2 in
1 in = 10 ft1:12010 ft1.2 m2 3/8 in
1 in = 20 ft1:24020 ft2.4 m1 3/16 in
1 in = 30 ft1:36030 ft3.6 m13/16 in
1 in = 40 ft1:48040 ft4.8 m5/8 in
1 in = 50 ft1:60050 ft6 m1/2 in
1 in = 60 ft1:72060 ft7.2 m3/8 in
1 in = 100 ft1:1,200100 ft12 m1/4 in

Engineering scales put feet per inch, so 1 in = 20 ft is 20 × 12 = 1:240, the number a scale conversion calculator for architecture works from. Site plans use these, while floor plans use the fraction-per-foot scales in the upper rows.

Fractions on a printed plan are easier read as decimals. 3/16 in is 0.1875 in, and an Inch Fraction Calculator converts a measured 4 7/16 in into 4.4375 for scale conversion calculator math.

CAD drawings are modeled full size and plotted at the ratio. A 1/4 in = 1 ft sheet plots at 1/48, so any scale conversion calculator for AutoCAD layouts works from 48, not from 0.25.

Metric Plans at 1:10, 1:50, 1:100 and 1:1000

A metric scale uses one unit on both sides, which keeps scale conversion calculator math in round numbers. At 1:100, 1 cm on the plan is 100 cm, or 1 m, on site, and 1 mm on the plan is 100 mm, so plans read in millimeters stay simple.

Scale1 cm on Plan Equals1 mm on Plan Equals10 m Wall on Plan
1:1010 cm10 mm1,000 mm
1:2020 cm20 mm500 mm
1:2525 cm25 mm400 mm
1:5050 cm50 mm200 mm
1:7575 cm75 mm133.33 mm
1:1001 m100 mm100 mm
1:2002 m200 mm50 mm
1:2502.5 m250 mm40 mm
1:5005 m500 mm20 mm
1:100010 m1,000 mm10 mm
1:125012.5 m1,250 mm8 mm
1:250025 m2,500 mm4 mm

A 1:75 plan is the awkward one, since 10 m draws as 133.33 mm. A 1:50 scale conversion puts the same wall at 200 mm, and halving that gives the 1:100 figure of 100 mm.

Mixed metric units convert by powers of ten, 10 mm per cm and 100 cm per m. A 1:1000 scale converter result of 10 mm is 1 cm, and 25 mm on a 1:1000 site plan is 25 m on the ground.

Model Trains, Kits and Figures by Ratio

Model railroad scales are fixed ratios. Per the NMRA scale table, O is 1:48, S is 1:64, OO is 1:76.2, HO is 1:87.1 from 3.5 mm per foot, TT is 1:120, N is 1:160 and Z is 1:220.

ScaleRatio6 ft Person1.8 m Person50 ft Boxcar
1:6 figure1:612 in300 mm100 in
1:12 dollhouse1:126 in150 mm50 in
1:18 diecast1:184 in100 mm33 5/16 in
G1:22.53 3/16 in80 mm26 11/16 in
1:241:243 in75 mm25 in
1:35 military1:352 1/16 in51.43 mm17 1/8 in
1:43 diecast1:431 11/16 in41.86 mm13 15/16 in
O UK, 7 mm/ft1:43.51 5/8 in41.38 mm13 13/16 in
O1:481 1/2 in37.5 mm12 1/2 in
28 mm heroic1:561 5/16 in32.14 mm10 11/16 in
S1:641 1/8 in28.12 mm9 3/8 in
1:72 aircraft1:721 in25 mm8 5/16 in
OO1:76.215/16 in23.62 mm7 7/8 in
HO1:87.113/16 in20.67 mm6 7/8 in
TT1:1205/8 in15 mm5 in
N UK1:1481/2 in12.16 mm4 1/16 in
N1:1607/16 in11.25 mm3 3/4 in
Z1:2205/16 in8.18 mm2 3/4 in
1:700 ship1:7001/8 in2.57 mm7/8 in

A larger number after the colon means a smaller model. 1:72 is smaller than 1:48, since a 6 ft pilot stands 1 in tall at 1:72 and 1 1/2 in at 1:48, and HO trains run 1.83 times the size of N.

OO and HO share 16.5 mm track but not body size. An OO figure is 114.3% of an HO one, so a model scale conversion calculator figure between them matters for people, buildings and vehicles on the same layout.

British O and N differ from the US versions as well. O UK at 7 mm per foot is 1:43.5, 10.3% larger than 1:48, and N UK at 1:148 is 8.1% larger than 1:160, so mixing UK and US kits shows.

Map Distances at 1:24,000 and Beyond

Map scales are the same scale conversion calculator ratio over long distances. USGS publishes its 7.5-minute topographic maps at 1:24,000, where 1 in on the map is 24,000 in, or 2,000 ft, on the ground.

Map Scale1 in on Map Equals1 cm on Map Equals10 cm Measured Equals5 Miles Drawn As
1:24,0002,000 ft240 m2.4 km13.2 in
1:25,0002,083.3 ft250 m2.5 km12.67 in
1:50,0004,166.7 ft500 m5 km6.336 in
1:100,0008,333.3 ft, 1.578 mi1 km10 km3.168 in

Alaska is the exception, with USGS 7.5-minute maps at 1:25,000. Any map scale converter figure is a straight-line distance, so a winding trail measured with a string runs longer than its endpoints suggest.

Map areas shrink by the square of the scale. One square inch on a 1:24,000 map covers 2,000 × 2,000 ft, or 91.83 acres, which an Acreage Calculator converts to hectares.

Percentages for Copiers, CAD and 3D Slicers

A scale percentage is the ratio written out of 100, the form a scale conversion calculator result takes for copiers. 1:48 is 100 ÷ 48 = 2.0833% of real size, and resizing a drawing from one scale to another uses the old number divided by the new one.

ChangePercentageDirection
1/8 in = 1 ft to 1/4 in = 1 ft200%Larger
1/4 in = 1 ft to 1/8 in = 1 ft50%Smaller
1:100 to 1:50200%Larger
1:50 to 1:10050%Smaller
1:24 to 1:4850%Smaller
3/16 in = 1 ft to 1 in = 40 ft13.333%Smaller
1 in = 30 ft to 1/2 in = 1 ft1,500%Larger
1:72 to 1:35205.71%Larger
1:35 to 1:7248.611%Smaller
HO to OO114.3%Larger
N to HO183.7%Larger

A slicer percentage acts on every axis at once. Printing a 1:72 file at 1:35 means 205.71% in X, Y and Z, and the scale ratio vs scale percentage difference is only how the same factor is written.

A copy reduced to 50% and then enlarged to 200% returns to the start, but a 1:48 plan copied at 50% is 1:96. Print a graphic scale bar on every sheet so the drawing stays readable after any copier change.

Squared Areas and Cubed Volumes

Area scales by the square of the ratio and volume by its cube. At 1:24 an area is 1/576 of real and a volume is 1/13,824, while a length is only 1/24, so a scale conversion calculator total for area never uses the length factor.

ScaleLengthAreaVolume
1:121/121/1441/1,728
1:181/181/3241/5,832
1:241/241/5761/13,824
1:351/351/1,2251/42,875
1:481/481/2,3041/110,592
1:721/721/5,1841/373,248
HO 1:87.11/87.11/7,586.411/660,776

A 384 sq ft floor at 1:48 covers 24 sq in of model, and 500 cu ft of room holds 7.81 cu in. Paint follows area, so 2,000 sq ft of real wall becomes 125 sq in at 1:48.

Weight follows volume, so it drops with the cube too. A copy of a 3,500 lb car in the same materials and proportions weighs 9.60 oz at 1:18 and 4.05 oz at 1:24, the answer to a scale conversion calculator for weight in pounds.

ScaleWeight Factor3,500 lb Car180 lb Person
1:61/21616.20 lb13.33 oz
1:121/1,7282.026 lb1.667 oz
1:181/5,8329.602 oz0.494 oz
1:241/13,8244.051 oz0.208 oz
1:351/42,8751.306 oz0.067 oz
1:431/79,5070.704 oz0.036 oz
1:641/262,1440.214 oz0.011 oz

The cube rule fits a true scale copy, not a solid block. A real car is mostly air inside, so a solid resin print of its body weighs far more than 4.05 oz at 1:24, since resin fills space the real car leaves empty.

Filament follows volume too. Dropping a print from 1:35 to 1:72 cuts it to 48.61% in each direction but to 11.49% of the plastic, and a Cubic Feet Calculator handles the real-size volume first.

Reading a Scale From Two Measurements

Reading a scale reverses the scale conversion calculator math, real length divided by scaled length in the same unit. A 15 ft wall drawn 7.5 in long is 180 ÷ 7.5 = 24, or 1:24, a standard 1/2 in = 1 ft drawing.

N is the number after the colon, L real is the true length and L scaled is the same feature measured on the drawing or model. A result below 1 means an enlargement, so 0.5 reads as 2:1.

Real LengthMeasured on ModelScaleNearest StandardGap
15 ft wall7.5 in1:241:24exact
40 ft boxcar5.5 in1:87.27HO 1:87.1+0.2%
6 ft figure1.25 in1:57.628 mm heroic 1:56+2.9%
14.5 ft car4.2 in1:41.431:43 diecast-3.7%
1.8 m figure30 mm1:601 in = 5 ft, 1:60exact

Measure the longest feature you can trust before a scale conversion calculator reading, since a 1/16 in reading error on a 5.5 in model moves the scale by more than 1%. A gap of a few percent usually means rounding or a maker's own scale.

Factors, 1:6 Figures and Scaling Up

A scale factor, a ratio and a percentage are one number in three forms, so 1:48, 1/48 and 2.0833% give the same scale conversion calculator result.

What is a scale factor?

A scale factor is the number every length is multiplied by. 1:48 has a factor of 1/48, or 0.0208333, and it is written as a fraction or a decimal, whichever the next step needs.

It is not always greater than 1. Reductions have factors below 1, enlargements above 1, so a 2:1 detail drawing has a factor of 2 and a 1:2 half-size drawing has 0.5.

What size is a 1:6 scale figure of a person?

A 1:6 figure of a 6 ft person stands 12 in tall, and a 1.8 m person stands 300 mm. A 5 ft 4 in person comes out at 10 2/3 in, which a Feet and Inches Calculator converts from mixed units.

How do I scale a drawing or model up?

Divide the old scale number by the new one and use that as the multiplier. Going from 1:100 to 1:50 doubles every length, 200%, and a 1:2 drawing enlarged to full size multiplies every length by 2.

Enlargements also need the area and volume changes. Doubling the lengths of a 3D print gives 4 times the surface to paint and 8 times the filament, so the material budget grows far faster than the size.

What scale are Dungeons and Dragons and Warhammer miniatures?

D&D grids put 1 in to 5 ft, which is 1:60, so a 6 ft hero stands about 1 3/16 in. Warhammer-style 28 mm heroic figures are often treated as about 1:56, though makers size them differently.

For 3D printed figures, the scale in a scale conversion calculator for models sets the print height before any base. A 1.8 m character prints 32.14 mm tall at 1:56, 75 mm at 1:24 and 300 mm at 1:6, and print time rises with the cube.