Asphalt sealer calculator for driveways and parking areas, working out sealer gallons by spray, squeegee or mixed sealcoat, plus pails, coats, crack filler, sand, water, and costs.
Measure the paved area to seal. Split L-shaped or flared drives into rectangles and add them.
Pails, Waste and Mix
Crack Filling
Sealer Price and Labor
Driveway Sealcoat Diagram
Asphalt Sealer Chart by Driveway Size
| Area | One Coat | All Coats | Pails | Sealer + Labor |
|---|---|---|---|---|
| 500 sq ft | 5.0 gal | 10.0 gal | 2 | $130.00 |
| 1,000 sq ft | 10.0 gal | 20.0 gal | 4 | $260.00 |
| 1,440 sq ft | 14.4 gal | 28.8 gal | 6 | $374.40 |
| 1,500 sq ft | 15.0 gal | 30.0 gal | 6 | $390.00 |
| 2,000 sq ft | 20.0 gal | 40.0 gal | 8 | $520.00 |
| 3,000 sq ft | 30.0 gal | 60.0 gal | 12 | $780.00 |
| 4,000 sq ft | 40.0 gal | 80.0 gal | 16 | $1,040 |
| 5,000 sq ft | 50.0 gal | 100.0 gal | 20 | $1,300 |
| 10,000 sq ft | 100.0 gal | 200.0 gal | 40 | $2,600 |
Step-by-Step Asphalt Sealer Math
Asphalt Sealer Calculator Coverage by Application Method
A sprayed asphalt sealer covers about 100 sq ft per gallon per coat, a squeegee or brush about 55 sq ft, and mixed sealcoat with sand about 76 sq ft. A 60 × 24 ft driveway needs 28.8 gallons for two sprayed coats but 52.4 gallons by squeegee.
G is the sealer in gallons, A is the paved area in square feet, C is the coverage per coat in sq ft per gallon and N is the number of coats. W is the waste allowance as a decimal, such as 0.10 for 10%.
The spray and hand rates follow Asphalt Kingdom, which gives 100 sq ft per gallon by sprayer and 50 to 60 by brush, roller or squeegee. Hand tools lay sealer thicker, which is why an asphalt sealer calculator result nearly doubles by squeegee.
| Method | Coverage per coat | Metric | 1,000 sq ft, 2 coats | 1,440 sq ft, 2 coats |
|---|---|---|---|---|
| Sprayer | 100 sq ft/gal | 2.45 m²/L | 20.0 gal (4 pails) | 28.8 gal (6 pails) |
| Mixed sealcoat with sand | 76 sq ft/gal | 1.87 m²/L | 26.3 gal mixed (4 pails) | 37.9 gal mixed (6 pails) |
| Squeegee, brush or roller | 55 sq ft/gal | 1.35 m²/L | 36.4 gal (8 pails) | 52.4 gal (11 pails) |
Pail counts in this asphalt sealer calculator table use 5 gallon pails rounded up. The 1,440 sq ft squeegee job needs 52.4 gallons, so 11 pails leave 2.6 gallons over and save a second trip for one more pail mid-job.
Mixed sealcoat pails count the concentrate you buy, since water and sand are added on site, so 37.9 mixed gallons need only 6 pails.
Some estimates use 100 sq ft per gallon on the first coat and 150 on the second, since the first coat fills the pores.
On 1,250 sq ft that predicts 20.8 gallons against 25.0 at an even asphalt sealer calculator rate, and SealMaster specifies the same rate for each coat.
For a metric asphalt sealer calculator check, two sprayed coats on 100 m² take about 81.5 liters. Measure the paved area only, and split an L-shaped or flared driveway into rectangles before adding them.
Gallons and Pails for Common Driveway Sizes
In asphalt sealer calculator terms, a 1,000 sq ft driveway takes 20 gallons, or four 5 gallon pails, for two sprayed coats. A 4,000 sq ft lot takes 80 gallons, which is 16 pails or about 1.45 drums of 55 gallons.
| Paved area | One coat | Two coats | 5 gal pails | 55 gal drums |
|---|---|---|---|---|
| 500 sq ft (46 m²) | 5.0 gal | 10.0 gal | 2 | 0.18 |
| 1,000 sq ft (93 m²) | 10.0 gal | 20.0 gal | 4 | 0.36 |
| 1,500 sq ft (139 m²) | 15.0 gal | 30.0 gal | 6 | 0.55 |
| 2,000 sq ft (186 m²) | 20.0 gal | 40.0 gal | 8 | 0.73 |
| 3,000 sq ft (279 m²) | 30.0 gal | 60.0 gal | 12 | 1.09 |
| 5,000 sq ft (465 m²) | 50.0 gal | 100.0 gal | 20 | 1.82 |
| 10,000 sq ft (929 m²) | 100.0 gal | 200.0 gal | 40 | 3.64 |
This driveway sealer calculator square feet chart is for spraying. For squeegee work multiply each figure by about 1.8, since 100 ÷ 55 = 1.82, so 1,000 sq ft becomes 36.4 gallons and 8 pails.
Large areas change the container choice. A 10,000 sq ft parking area needs 200 gallons, which is 40 pails to open and stir or just under 4 drums.
A waste allowance pushes an asphalt sealer calculator estimate over a pail boundary. At 5% the 1,440 sq ft spray job rises from 28.8 to 30.24 gallons and from 6 to 7 pails, so leave it at zero only when the pails already have spare.
Concentrate, Water and Sand for Mixed Sealcoat
For an asphalt sealer calculator estimate on contractor sealcoat, the product comes as a concentrate mixed with 15 to 25 gallons of water and 200 to 500 lb of sand per 100 gallons.
Mixed, it covers 70 to 82 sq ft per gallon per coat, per the SealMaster MasterSeal technical data sheet.
The same sheet rates the concentrate itself at 100 to 120 sq ft per gallon per coat, with at least two coats. For 1,440 sq ft that means 24.0 to 28.8 gallons of concentrate across both coats.
| Concentrate for 1,440 sq ft, 2 coats | Water at 15% | Water at 25% | Sand at 2 lb/gal | Sand at 5 lb/gal |
|---|---|---|---|---|
| 24.0 gal (120 sq ft/gal) | 3.6 gal | 6.0 gal | 48 lb | 120 lb |
| 28.8 gal (100 sq ft/gal) | 4.3 gal | 7.2 gal | 58 lb | 144 lb |
Mixed sealcoat at 76 sq ft per gallon takes 37.9 gallons for the same job. Dividing that by 1.2 for 20% water gives 31.6 gallons of concentrate, more than the data sheet's range, because the sand also adds volume to the mix.
Count the sand's volume in any asphalt sealer calculator concentrate figure to close the gap, since it fills part of every mixed gallon.
Each pound of sand takes up about 0.045 gallons, so 4 lb per gallon adds 18% to the mix, and 37.9 gallons of mixed sealcoat comes from about 27.4 gallons of concentrate.
That 27.4 gallons is 6 pails of concentrate, mixed with 5.5 gallons of water and about 110 lb of sand. It works out to about 105 sq ft per gallon of concentrate per coat, inside SealMaster's 100 to 120 range.
The data sheet also sets the weather window. Surface and air must be at least 50°F and rising, and the final coat needs 24 hours to dry before cars drive on it.
Crack Filler Before the Sealcoat
Sealer does not fill cracks, so fill any crack wider than a hairline before the first coat and before any asphalt sealer calculator estimate is final.
A driveway with 200 ft of cracks 1/2 in wide and 1/2 in deep needs about 2.6 gallons of filler, or three 1 gallon jugs.
V is the filler in gallons, L is the crack length in feet, w and d are its width and depth in inches, and 231 is the cubic inches in a US gallon. The 12 turns feet of crack into inches.
| Crack size | 50 ft of crack | 100 ft of crack | 200 ft of crack |
|---|---|---|---|
| 1/4 × 1/2 in | 0.32 gal | 0.65 gal | 1.30 gal |
| 1/2 × 1/2 in | 0.65 gal | 1.30 gal | 2.60 gal |
| 3/4 × 3/4 in | 1.46 gal | 2.92 gal | 5.84 gal |
| 1 × 1 in | 2.60 gal | 5.19 gal | 10.39 gal |
Width and depth both multiply in the asphalt sealer calculator crack math, so doubling a 1/2 in crack to 1 in by 1 in uses four times the filler.
One gallon fills 77 ft of 1/2 × 1/2 in crack, a quick asphalt crack filling calculator rule for pricing jugs.
SealMaster's data sheet calls for crack filling and a clean surface, free of loose material and dirt, before any sealcoat goes down. Measure crack depth with a ruler or nail at several points and use the average.
Potholes and broken patches need more than filler. The Cold Patch Asphalt Calculator counts bags for holes too deep to seal over.
Labor, Material and Sealcoating Cost
In a driveway sealing cost calculator estimate, two sprayed coats on a 1,000 sq ft driveway cost $110 in sealer at $5.50 a gallon. Hiring the work out at $0.15 per sq ft adds $150, for $260 in all, or $0.26 per sq ft before crack filler.
| Driveway | Sealer at $5.50/gal | DIY total | Labor at $0.15/sq ft | Labor at $0.25/sq ft |
|---|---|---|---|---|
| 1,000 sq ft | $110 | $110 | $260 | $360 |
| 1,440 sq ft | $158.40 | $158.40 | $374.40 | $518.40 |
| 4,000 sq ft | $440 | $440 | $1,040 | $1,440 |
Labor is the larger share once a crew is hired. On 4,000 sq ft at $0.15 per sq ft, labor is $600 of the $1,040 total, so the sealer price matters less than the per square foot rate in any sealcoating cost calculator figure.
The prices in these asphalt sealer calculator examples are inputs, not market quotes. Sealer runs from budget retail pails to contractor drums, so use your local pail or drum price and the crew's quoted rate per square foot.
Crack filler adds to both. The 200 ft of 1/2 in cracks on the 1,440 sq ft driveway needs 2.6 gallons, which at $15 a gallon is $38.96, taking the hired-out total to $413.36, or $0.287 per sq ft.
The same driveway by squeegee nearly doubles the asphalt sealer calculator material bill. At 52.4 gallons the sealer alone is $288, against $158.40 for spraying, which can pay for renting a sprayer on larger drives.
Coats, Coverage and Bucket Counts
Each answer below works fresh numbers through the same asphalt sealer calculator math as the sections above.
How much asphalt sealer do I need?
Divide the paved area by the coverage per gallon, multiply by the number of coats, then round up to whole pails. A 40 × 20 ft driveway is 800 sq ft, so two sprayed coats need 16 gallons, or four 5 gallon pails.
By squeegee the same 800 sq ft takes 29.1 gallons and 6 pails. For the asphalt sealer calculator inputs, measure length and width in feet along the paved edges, and subtract any concrete pads or garage aprons you will not seal.
How much to seal a 1000 sq ft driveway?
A 1,000 sq ft driveway needs 20 gallons for two sprayed coats, or 36.4 gallons by squeegee. With sealer at $5.50 a gallon, that is $110 to spray it yourself and $200 by squeegee.
A crew at $0.15 per sq ft adds $150 of labor to the sprayed job, for $260. Add filler for cracks, about 1.3 gallons for every 100 ft of 1/2 in crack.
How much to sealcoat a 4000 sq ft driveway?
A 4,000 sq ft driveway needs 80 gallons for two sprayed coats, which is 16 pails or about 1.5 drums of 55 gallons. Mixed sealcoat with sand at 76 sq ft per gallon takes 105.3 gallons, made from 76.2 gallons of concentrate in 16 pails.
At $5.50 a gallon and $0.15 per sq ft, the sprayed job runs $1,040, with labor at $600 of it. By squeegee the sealer alone would be 145.5 gallons, or 30 pails, so spraying saves 65.5 gallons on a lot this size.
How much does 5 litres of sealant cover?
Five liters of asphalt sealer covers about 12.3 m² for one sprayed coat, or about 6.1 m² for two coats. By roller or squeegee the same 5 liters covers about 6.75 m² for one coat.
Those asphalt sealer calculator figures use 2.45 m² per liter for spraying and 1.35 m² per liter by hand. A 30 m² path with two hand-applied coats needs about 44 liters, or nine 5 liter tins.
How many square feet does one bucket of driveway sealer cover?
A 5 gallon bucket covers about 500 sq ft with one sprayed coat, or 250 sq ft with two. Applied by squeegee it covers about 275 sq ft for one coat and 137.5 sq ft for two.
A 5 gallon pail of contractor concentrate, mixed with 20% water and 4 lb of sand per gallon, covers about 525 sq ft for one coat.
Check the coverage on your product's label before an asphalt sealer calculator count, since retail and contractor sealers differ.
What is the coverage rate of an asphalt sealer?
Coverage runs about 100 sq ft per gallon by sprayer and 50 to 60 by hand, per Asphalt Kingdom. SealMaster rates its mixed MasterSeal at 70 to 82 sq ft per gallon, or 100 to 120 for the concentrate before mixing.
Old, dry or porous asphalt soaks up more sealer, so its real coverage falls toward the low end. A 10% waste allowance on rough pavement turns the 1,440 sq ft spray job from 28.8 into 31.68 gallons.
How many coats of driveway sealer do I need?
Use two coats. SealMaster specifies a minimum of two, with a third optional on high-traffic areas such as entrances and drive lanes.
One coat on 1,440 sq ft uses 14.4 gallons and three pails, and the second coat needs the same again. Let each coat dry fully before the next, and keep traffic off for 24 hours after the last.
Does sealer fill driveway cracks?
Sealer is a thin coat that bridges only hairline cracks, so wider cracks need a crack filler first. Filling 100 ft of 3/4 × 3/4 in cracks takes about 2.9 gallons, or 3 jugs.
Sealing over open cracks lets water reach the base and the crack keeps growing under the new coat. Fill, let the filler cure per its label, then seal.
Do I round gallons or containers?
Round the containers, never the gallons, in any asphalt sealer calculator count. A job needing 21.1 gallons buys five 5 gallon pails, not four, because 4 pails hold only 20 gallons and the last 1.1 gallons cannot be bought loose.
Coverage can differ from the estimate because of pavement texture, temperature and how thick the coat goes on. Keep one spare pail unopened if your supplier takes returns, rather than stopping mid-coat to buy more.