Asphalt Driveway Cost Calculator

Updated

Asphalt driveway cost calculator for new paving, replacement or a resurfacing overlay, with tons of hot mix, labor and base costs, price per square foot, and a concrete comparison.

Driveway Setup

Paving bare ground or gravel. The estimate adds hot mix asphalt, paving labor and a compacted gravel base.

Asphalt Price and Mix$120 per US ton, 5% waste
%
Labor and Site Work$3.50 per sq ft
Permit, Extras and Discount$100.00 fees, no discount
$
$
%
Concrete and Lifespan ComparisonConcrete $7.00 per sq ft
years
years
years
Asphalt Driveway Cost
$2,414 New Driveway CostTotal
400 sq ft of 3 in hot mix asphalt on a gravel base
$6.03 per Sq Ft Installedper Sq Ft
Installed per Ton$317.04
Per Square Yard$54.30
Total cost divided by paved area. Local quotes vary with region, season and site access.
7.61 US Tons to OrderTons
Asphalt Material$913.50
Coverage per Ton55.2 sq ft
Compacted volume times density, plus waste. Thicker asphalt means less area per ton.
$1,400 Labor & Site WorkLabor & Site
Paving Labor$800.00
Gravel Base & Grading$600.00
Crew, equipment and ground work. Soft, sloped or wet ground costs more to prepare.
$486.50 Less Than ConcreteUnder Concrete
Concrete Driveway$2,900
Per Year, Asphalt vs ConcretePer Year$120.68 vs $82.86
Asphalt costs less up front but more per year of service than concrete, at your lifespans.
Cost Breakdown ChartAsphalt 38% of cost
Cost before discount: $2,414Hot mix asphalt$913.50 37.8%Paving labor$800.00 33.1%Gravel Base and Grading$600.00 24.9%Permit and extras$100.00 4.1%
Cost by Driveway Size3 in thick at your prices
DrivewayAreaTonsTotalPer sq ft
1-Car 10×20 ft200 sq ft3.81$1,257$6.28
1-Car 12×24 ft288 sq ft5.48$1,766$6.13
2-Car 20×20 ft400 sq ft7.61$2,414$6.03
2-Car 24×24 ft576 sq ft10.96$3,431$5.96
3-Car 24×36 ft864 sq ft16.44$5,097$5.90
Large Driveway1,000 sq ft19.03$5,884$5.88
Extended Driveway1,500 sq ft28.55$8,776$5.85
Long Rural Driveway2,500 sq ft47.58$14,559$5.82
Step-by-Step Cost Math9 steps
Area20 ft × 20 ft = 400.00 sq ft
Asphalt volume400.00 sq ft × 3 in ÷ 12 = 100 ft³ (2.8317 m³)
Asphalt weight100 ft³ × 145 lb/ft³ ÷ 2,000 = 7.25 tons, × 1.05 waste = 7.6125 tons (6.9059 tonnes)
Asphalt material7.6125 tons × $120.00 per ton = $913.50
Paving labor400.00 sq ft × $2.00 = $800.00
Gravel Base and Grading400.00 sq ft × $1.50 = $600.00
Permit and extras$100.00 + $0.00 = $100.00
Concrete instead400.00 sq ft × $7.00 + $100.00 = $2,900.00
Total$913.50 + $800.00 + $600.00 + $100.00 = $2,413.50, or $6.03 per sq ft
Right for Cars and Pickups
Each extra inch adds 2.54 tons and $304.50 of asphalt. Use 4 in or more if RVs, delivery trucks or trailers will park on it.

Itemized Asphalt Driveway Cost Calculator Math

A new 20 × 20 ft asphalt driveway, 3 inches thick on a gravel base, comes to about $2,414, or $6.03 per sq ft.

That asphalt driveway cost calculator figure uses $120 per ton of hot mix asphalt, $2.00 per sq ft paving labor, $1.50 per sq ft base and a $100 permit.

T is the US tons to order, A is the paved area in square feet, t is the compacted thickness in inches and 145 is compacted asphalt density in lb per cubic foot. The 2,000 turns pounds into tons and w is the waste allowance, 5% here.

The 145 lb per cubic foot equals about 109 lb per square yard per inch of thickness. In asphalt driveway cost calculator terms, a 400 sq ft driveway at 3 inches is 100 cubic feet, 7.25 tons compacted and 7.61 tons to order with waste.

Cost line, 20 × 20 ft newRateCostShare
Hot mix asphalt, 7.61 tons$120 per ton$913.5037.8%
Paving labor$2.00 per sq ft$80033.1%
Gravel base and grading$1.50 per sq ft$60024.9%
PermitFlat fee$1004.1%
Total$6.03 per sq ft$2,413.50100%

The asphalt itself is barely a third of the bill. Labor and base work are 58%, so an asphalt driveway cost calculator estimate built on the price of asphalt per ton alone misses most of the job.

Every rate in this table is an example input, not a market price. Replace each one in any asphalt driveway cost calculator run with the figures on your contractor's quote, since labor and base rates swing widely between regions and seasons.

Driveway Sizes From One Car to Rural Lanes

At the same rates, an asphalt driveway cost calculator total for a new 1,000 sq ft driveway is about $5,884 and a 1,500 sq ft driveway about $8,776.

Replacing an old driveway adds $1.50 per sq ft for tear-out and haul away, and an overlay over a sound surface costs about half as much as new.

DrivewayAreaTons, 3 inNewReplace2 in overlay
1-car, 10 × 20 ft200 sq ft3.81$1,257$1,557$754
1-car, 12 × 24 ft288 sq ft5.48$1,766$2,198$1,042
2-car, 20 × 20 ft400 sq ft7.61$2,414$3,014$1,409
2-car, 24 × 24 ft576 sq ft10.96$3,431$4,295$1,985
3-car, 24 × 36 ft864 sq ft16.44$5,097$6,393$2,927
Large1,000 sq ft19.03$5,884$7,384$3,372
Extended1,500 sq ft28.55$8,776$11,026$5,009
Long rural lane2,500 sq ft47.58$14,559$18,309$8,281

Small driveways cost more per square foot in an asphalt driveway cost calculator estimate because the $100 permit is spread over less area. A 10 × 20 ft single stall comes to $6.28 per sq ft new, against $5.82 for a 2,500 sq ft lane.

An L-shaped drive or turnaround is two rectangles added. A 20 × 40 ft run with a 12 × 10 ft turnout is 920 sq ft, about 17.51 tons and $5,421 new.

Measure each section for the asphalt driveway cost calculator rather than guessing one overall rectangle, since a turnout or flare can change the total by hundreds of square feet.

Gravel is the usual alternative surface for long rural lanes. The Gravel Driveway Calculator prices the same footprint in stone, for comparison before an asphalt driveway cost calculator total is final.

Thickness and Tons per Square Foot

One US ton of compacted asphalt covers about 55 sq ft at 3 inches thick, 83 sq ft at 2 inches and 41 sq ft at 4 inches.

Every added inch on a 1,000 sq ft driveway adds about 6.3 tons and $761 of asphalt at $120 per ton to the asphalt driveway cost calculator total.

Thickness, 1,000 sq ftCoverage per tonTons to orderAsphalt costTotal new
2 in82.8 sq ft12.69$1,522$5,122
3 in55.2 sq ft19.03$2,284$5,884
4 in41.4 sq ft25.38$3,045$6,645
5 in33.1 sq ft31.72$3,806$7,406
6 in27.6 sq ft38.06$4,568$8,168

The Colorado Asphalt Pavement Association driveway brief calls for 3 inches of hot mix over 4 inches of aggregate base on fair or good soil, and over 6 inches on poor soil. Full-depth asphalt with no base runs 4.5 to 5.5 inches.

That makes the base the cheaper path to strength on good soil. The Illinois Asphalt Pavement Association rates 1 inch of asphalt as equal to 3 inches of aggregate base, so a thin mat on a deep base often beats paying for extra asphalt.

Thickness in an asphalt driveway cost calculator is the compacted figure. Loose mix spreads thicker than it ends up, and the Asphalt Compaction Calculator works out how deep to lay it to reach 3 compacted inches.

New, Replacement or Resurfacing Overlay

An asphalt driveway resurfacing cost calculator figure for a 2 inch overlay on 1,000 sq ft is about $3,372, against $7,384 to tear out and replace it.

The overlay skips the base and the tear-out, needing only $1.25 per sq ft labor and $0.50 per sq ft milling and patching.

Both trade associations put a driveway overlay at 1.5 to 2 inches of surface mix, laid only after weak spots, holes and large cracks are cut out and patched. A 2 inch overlay takes 12.69 tons on 1,000 sq ft.

1,000 sq ft optionCost nowLife usedCost per year
2 in overlay$3,37212 years$281
Tear out and replace, 3 in$7,38420 years$369
New on gravel, 3 in$5,88420 years$294

The overlay wins on both price and cost per year here, but only if the old base is sound. An overlay over a failing base cracks back through, so an overlay price only holds where the existing driveway is still flat and solid.

The 20 year asphalt driveway cost calculator life matches the Colorado brief's "up to 20 years" for a well-built, maintained driveway. The 12 year overlay life is an example input, so set it from your contractor's warranty or local experience.

Replacement adds $1,500 of tear-out on 1,000 sq ft at $1.50 per sq ft. That line is what separates an asphalt driveway replacement cost per square foot of $7.38 from $5.88 for new paving on open ground.

Concrete Versus Asphalt Over the Driveway's Life

At $7 per sq ft for concrete, a new 1,000 sq ft concrete driveway costs about $7,100, which is $1,216 more than the $5,884 asphalt job. Spread over 35 years for concrete and 20 for asphalt, concrete costs $203 a year against $294.

The cheaper driveway up front is not the cheaper one per year in an asphalt driveway cost calculator comparison. On these inputs asphalt saves $1,216 at install, but concrete costs $91 less per year because it is assumed to last 15 years longer.

New drivewayAsphalt nowConcrete nowAsphalt per yearConcrete per year
400 sq ft$2,414$2,900$121$83
1,000 sq ft$5,884$7,100$294$203

Concrete price and both lifespans are example asphalt driveway cost calculator inputs, and they decide this comparison. For your own numbers, the Concrete Driveway Cost Calculator prices the concrete side from slab thickness and yards.

Upkeep shifts the balance too. Sealcoat upkeep adds to asphalt's yearly cost, and the Asphalt Sealer Calculator puts two sprayed coats on 1,000 sq ft at 20 gallons of sealer.

Price per Ton and Regional Quotes

Raising hot mix from $120 to $200 per ton lifts a 1,000 sq ft new driveway from $5,884 to $7,406, a $1,522 jump on 19.03 tons.

The asphalt share of the bill climbs from 38.8% to 51.4%, so the per-ton price matters most on thick or large jobs in any asphalt driveway cost calculator estimate.

Hot mix priceAsphalt for 1,000 sq ftTotal newPer sq ftAsphalt share
$80 per ton$1,522$5,122$5.1229.7%
$100 per ton$1,903$5,503$5.5034.6%
$120 per ton$2,284$5,884$5.8838.8%
$150 per ton$2,855$6,455$6.4544.2%
$200 per ton$3,806$7,406$7.4151.4%

Angi reported asphalt at about $100 to $200 per ton and new driveways at $7 to $13 per sq ft installed, in data updated February 2022. Its range sits above these example inputs, so check your own labor and base quotes.

The same math works in any currency. For an asphalt driveway cost calculator Australia, Canada or UK estimate, quote hot mix per tonne and labor per square meter, and 100 m² at 3 inches needs about 18.6 tonnes.

Some contractors quote installed price per ton rather than per square foot. The 20 × 20 ft job works out to about $317 per ton laid and the 1,000 sq ft job to about $309, so compare quotes on the same basis.

A contractor discount applies to the whole asphalt driveway cost calculator bill. At 10% off, the 1,000 sq ft new driveway drops from $5,884 to about $5,295, which is worth more than a $20 per ton cut in the asphalt price.

Square Feet, Tons and Lifespan

Each answer below works fresh numbers through the same asphalt driveway cost calculator math as the tables above.

How to calculate asphalt driveway cost?

Multiply area by thickness, then by 145 lb per cubic foot and divide by 2,000 for tons, and price the tons.

Add labor, base and any tear-out per square foot, then the permit and extras, which is the asphalt driveway installation cost estimator method.

For a 24 × 24 ft two-car driveway, 576 sq ft at 3 inches is 10.96 tons with waste, or $1,315 of asphalt at $120. Labor and base add $2,016, and the permit takes it to $3,431, or $5.96 per sq ft.

How much does 1000 sq ft of asphalt cost?

A new 1,000 sq ft asphalt driveway at 3 inches costs about $5,884 at the example rates, with 19.03 tons of asphalt costing $2,284. Replacing an old one runs about $7,384, and a 2 inch overlay about $3,372.

The asphalt alone in an asphalt driveway cost calculator run at Angi's $100 to $200 per ton is $1,903 to $3,806 for those 19.03 tons. Labor and base usually cost more than the mix, so get them quoted per square foot.

How much is 1500 square feet of asphalt?

1,500 sq ft of asphalt at 3 inches is about 28.55 tons to order, costing $3,426 at $120 per ton. A new driveway that size comes to about $8,776, or $5.85 per sq ft.

At 2 inches as an overlay, the same area takes 19.03 tons and costs about $5,009 installed. Replacing a 1,500 sq ft driveway with tear-out runs about $11,026.

How much is a 20x20 asphalt driveway?

A 20 × 20 ft asphalt driveway is 400 sq ft and costs about $2,414 new at 3 inches, $3,014 as a replacement and $1,409 as a 2 inch overlay. It needs 7.61 tons of asphalt with 5% waste.

That is $54.30 per square yard for the new driveway. Going to 4 inches for heavy vehicles adds about 2.54 tons and $305 of asphalt.

Is asphalt cheaper than concrete?

At these example rates asphalt is cheaper to install. A new 400 sq ft asphalt driveway costs about $2,414 against $2,900 in concrete at $7 per sq ft, a $486 saving.

Concrete can still cost less per year of service in an asphalt driveway cost calculator comparison. At 20 years for asphalt and 35 for concrete, the 400 sq ft asphalt drive costs $121 a year against $83 for concrete.

How many square feet will 1 ton of asphalt cover?

One ton of asphalt covers about 55 sq ft at 3 inches compacted, 83 sq ft at 2 inches and 41 sq ft at 4 inches. Divide 2,000 lb by 145 lb per cubic foot times the thickness in feet to get the figure.

At 1.5 inches, the thin end of an overlay, one ton covers about 110 sq ft. Order about 5% more than the compacted tons from an asphalt driveway cost calculator to cover handling and uneven ground.

How much do 4 tons of asphalt cost?

Four tons of hot mix asphalt cost about $480 at $120 per ton, or $400 to $800 across Angi's $100 to $200 range. That is material only, before delivery, labor and base.

Four tons cover about 221 sq ft at 3 inches or 331 sq ft at 2 inches. That is roughly a 10 × 22 ft single stall at full thickness, or a 2 inch overlay on an 18 × 18 ft pad.

Is 2 inches of asphalt enough for a driveway?

Two inches is enough for an overlay on a sound old driveway, but not for a new one. The Colorado brief calls for 3 inches over a gravel base, and both state associations put overlays at 1.5 to 2 inches.

Cutting a new 1,000 sq ft driveway from 3 to 2 inches saves $762 on 6.34 fewer tons. That saving is small next to the full $5,884 driveway it puts at risk of early cracking.

How thick of a base is needed?

A residential driveway needs 4 inches of compacted aggregate base on fair or good soil and 6 inches on poor soil, under 3 inches of asphalt, per the Colorado Asphalt Pavement Association.

Some contractors use 6 to 8 inches of base under 3 inches of asphalt, per the Illinois association, on weaker or wetter ground.

The base price sits in the $1.50 per sq ft example rate, $1,500 on a 1,000 sq ft driveway. The Gravel Driveway Calculator works out the stone tons for a given base depth.

How long does an asphalt driveway last?

A well-built and maintained asphalt driveway lasts up to 20 years, per the Colorado Asphalt Pavement Association brief. A 2 inch overlay can add another stretch of service where the base is still sound.

At the $5,884 asphalt driveway cost calculator total for a new 1,000 sq ft driveway, 20 years works out to $294 a year. Sealcoating and prompt crack filling are what keep a driveway near that full life.