Inductor Color Code Calculator

Updated

Inductor color code calculator for 3-, 4- and 5-band molded chokes and SMD codes like 4R7, with the value in µH, tolerance range, nearest E12 size and reactance at a set frequency.

Inductor Color Bands

Pick the band colors from the end where the bands sit closest together. The value is in microhenries (µH).

Reactance Frequency100 kHz
47 µH Inductor
Yellow 4, Violet 7, Black ×1
±10% Tolerance (Silver)
Lowest Reading42.3 µH
Highest Reading51.7 µH
The inductance a good part can read on an LCR meter, from the tolerance.
470 SMD Inductor Code
Military BandsSilver Yellow Violet Black
In Nanohenries47,000 nH
The same inductance written in the other marking styles you may find.
29.5 Ω Reactance at 100 kHz
At 60 Hz17.7 mΩ
At 1 MHz295 Ω
Opposition to AC at this frequency, XL = 2πfL, with two common comparisons.
E6 Standard Value
Next E12 Down39 µH
Next E12 Up56 µH
The preferred-value series this size belongs to, with stock sizes either side.
How to Read These BandsYellow Violet Black Silver
47×1±10%Read this way
Standard Inductor Values Chart47 µH highlighted
Inductance4-Band ColorsMilitary BandsSMD Code
100 nHBrown Black SilverSilver Gold Brown BlackR10
120 nHBrown Red SilverSilver Gold Brown RedR12
150 nHBrown Green SilverSilver Gold Brown GreenR15
180 nHBrown Grey SilverSilver Gold Brown GreyR18
220 nHRed Red SilverSilver Gold Red RedR22
270 nHRed Violet SilverSilver Gold Red VioletR27
330 nHOrange Orange SilverSilver Gold Orange OrangeR33
390 nHOrange White SilverSilver Gold Orange WhiteR39
470 nHYellow Violet SilverSilver Gold Yellow VioletR47
560 nHGreen Blue SilverSilver Gold Green BlueR56
680 nHBlue Grey SilverSilver Gold Blue GreyR68
820 nHGrey Red SilverSilver Gold Grey RedR82
1 µHBrown Black GoldSilver Brown Gold Black1R0
1.2 µHBrown Red GoldSilver Brown Gold Red1R2
1.5 µHBrown Green GoldSilver Brown Gold Green1R5
1.8 µHBrown Grey GoldSilver Brown Gold Grey1R8
2.2 µHRed Red GoldSilver Red Gold Red2R2
2.7 µHRed Violet GoldSilver Red Gold Violet2R7
3.3 µHOrange Orange GoldSilver Orange Gold Orange3R3
3.9 µHOrange White GoldSilver Orange Gold White3R9
4.7 µHYellow Violet GoldSilver Yellow Gold Violet4R7
5.6 µHGreen Blue GoldSilver Green Gold Blue5R6
6.8 µHBlue Grey GoldSilver Blue Gold Grey6R8
8.2 µHGrey Red GoldSilver Grey Gold Red8R2
10 µHBrown Black BlackSilver Brown Black Black100
12 µHBrown Red BlackSilver Brown Red Black120
15 µHBrown Green BlackSilver Brown Green Black150
18 µHBrown Grey BlackSilver Brown Grey Black180
22 µHRed Red BlackSilver Red Red Black220
27 µHRed Violet BlackSilver Red Violet Black270
33 µHOrange Orange BlackSilver Orange Orange Black330
39 µHOrange White BlackSilver Orange White Black390
47 µHYellow Violet BlackSilver Yellow Violet Black470
56 µHGreen Blue BlackSilver Green Blue Black560
68 µHBlue Grey BlackSilver Blue Grey Black680
82 µHGrey Red BlackSilver Grey Red Black820
100 µHBrown Black BrownSilver Brown Black Brown101
120 µHBrown Red BrownSilver Brown Red Brown121
150 µHBrown Green BrownSilver Brown Green Brown151
180 µHBrown Grey BrownSilver Brown Grey Brown181
220 µHRed Red BrownSilver Red Red Brown221
270 µHRed Violet BrownSilver Red Violet Brown271
330 µHOrange Orange BrownSilver Orange Orange Brown331
390 µHOrange White BrownSilver Orange White Brown391
470 µHYellow Violet BrownSilver Yellow Violet Brown471
560 µHGreen Blue BrownSilver Green Blue Brown561
680 µHBlue Grey BrownSilver Blue Grey Brown681
820 µHGrey Red BrownSilver Grey Red Brown821
1 mHBrown Black RedSilver Brown Black Red102
1.2 mHBrown Red RedSilver Brown Red Red122
1.5 mHBrown Green RedSilver Brown Green Red152
1.8 mHBrown Grey RedSilver Brown Grey Red182
2.2 mHRed Red RedSilver Red Red Red222
2.7 mHRed Violet RedSilver Red Violet Red272
3.3 mHOrange Orange RedSilver Orange Orange Red332
3.9 mHOrange White RedSilver Orange White Red392
4.7 mHYellow Violet RedSilver Yellow Violet Red472
5.6 mHGreen Blue RedSilver Green Blue Red562
6.8 mHBlue Grey RedSilver Blue Grey Red682
8.2 mHGrey Red RedSilver Grey Red Red822
10 mHBrown Black OrangeSilver Brown Black Orange103
Inductor Color Code Chart4 colors highlighted
ColorDigitMultiplierTolerance
Black0× 1±20%
Brown1× 10±1%
Red2× 100±2%
Orange3× 1,000±3% (military)
Yellow4× 10,000±4% (military)
Green5× 100,000-
Blue6--
Violet7--
Grey8--
White9--
GoldDecimal point× 0.1±5%
Silver-× 0.01±10%
None--±20%

Military 5-band: a wide silver band comes first. Gold in band 2 or 3 is a decimal point, and band 4 is then a digit.

Step-by-Step Math6 steps
1. Digit BandsYellow = 4, Violet = 7 → 47
2. MultiplierBlack → × 1
3. Inductance47 × 1 = 47 µH
4. ToleranceSilver = ±10% → 42.3-51.7 µH
5. ReactanceXL = 2π × 100,000 Hz × 47 µH = 29.5 Ω
6. Result47 µH Inductor
Check It With an LCR Meter
A multimeter cannot read inductance; test at the datasheet frequency. The same bands on a resistor would mean 47 Ω, so check the body shape and size.

Microhenries, Not Ohms, in an Inductor Color Code Calculator

Yellow, violet, black and silver on an inductor mean 47 µH ±10%. The first two bands are digits, the third is a multiplier in microhenries and the fourth is the tolerance, so a good part measures 42.3-51.7 µH.

L is the inductance in µH, D1 and D2 are the digit values of the first two bands, and M is the multiplier exponent: -2 for silver, -1 for gold, 0 for black, 1 for brown, up to 5 for green.

The microhenry base comes from IEC 60062, which the TDK (EPCOS) MCC RF choke datasheet cites for its bands. A resistor with the same stripes reads in ohms, so an inductor color code calculator value and a resistor value share digits but not units.

Bands 1-3On an inductorSame bands on a resistor
Red Red Silver220 nH0.22 Ω
Yellow Violet Gold4.7 µH4.7 Ω
Orange Orange Black33 µH33 Ω
Yellow Violet Black47 µH47 Ω
Brown Black Brown100 µH100 Ω
Red Violet Brown270 µH270 Ω
Brown Black Red1 mH1 kΩ
Brown Green Red1.5 mH1.5 kΩ
Brown Black Orange10 mH10 kΩ
Brown Black Yellow100 mH100 kΩ
Brown Black Green1 H1 MΩ

A 1 mH inductor color code is brown, black, red, and a 10 mH code is brown, black, orange. Each is followed by its tolerance band, or by no band at all on a ±20% part.

A spreadsheet copy of the inductor color code calculator math needs one formula. With the first digit in A2, the second in B2 and the multiplier exponent in C2, =(10*A2+B2)*POWER(10,C2) gives the value in µH.

Frontier's table runs the multiplier from silver to yellow, and TDK adds green at × 100,000 µH, so the 4-band code spans 0.1 µH, brown, black, silver, to 9.9 H, white, white, green.

Below 0.1 µH, RF parts switch to printed codes, and an inductor color code calculator result under that floor points to a misread band.

Gold and Silver Bands: Multiplier, Decimal Point or Tolerance

Gold means × 0.1 in the third band, ±5% in the fourth and a decimal point in the first or second. Silver means × 0.01 as a multiplier and ±10% as a tolerance, so the same color changes the inductor color code calculator value by position.

Bands 1-3Role of gold or silverInductance
Yellow Violet GoldGold × 0.14.7 µH
Yellow Gold VioletGold decimal point4.7 µH
Gold Yellow VioletGold decimal point first0.47 µH
Yellow Violet SilverSilver × 0.010.47 µH
Blue Grey GoldGold × 0.16.8 µH
Blue Grey SilverSilver × 0.010.68 µH

Both 4.7 µH spellings appear on real parts and give the same inductor color code calculator value, 4.7 µH, whichever band holds the gold.

TDK decodes yellow, violet, gold, silver as 47 × 0.1 µH ±10%, while the Bourns 8250 series datasheet puts a gold decimal point between the digits below 10 µH.

A gold band in a value position is never a multiplier, so the band after it is a digit. Any inductor color code calculator reading with gold in band 1 or 2 and silver or gold in band 3 is a misread.

The fourth band sets the window around an inductor color code calculator value that a good part may read in. For a 47 µH choke the window shrinks from almost 19 µH wide with no band to under 1 µH with a brown band.

Fourth bandTolerance47 µH part reads
None±20% (M)37.6-56.4 µH
Silver±10% (K)42.3-51.7 µH
Gold±5% (J)44.65-49.35 µH
Red±2% (G)46.06-47.94 µH
Brown±1% (F)46.53-47.47 µH

Most molded chokes are ±10% or ±5%. Frontier's RF coated choke sheet lists gold 5%, silver 10% and no band 20%, and its ordering codes stop at M, K and J.

Military Chokes With a Wide Silver Band

A double-width silver band marks a military-spec choke, and the value starts at the next band. Bourns describes it as a silver band twice the width of the others, so a 5-band part carries four bands of data.

InductanceMilitary bandsStandard 4-band
0.22 µHSilver Gold Red RedRed Red Silver
0.68 µHSilver Gold Blue GreyBlue Grey Silver
1 µHSilver Brown Gold BlackBrown Black Gold
4.7 µHSilver Yellow Gold VioletYellow Violet Gold
6.8 µHSilver Blue Gold GreyBlue Grey Gold
47 µHSilver Yellow Violet BlackYellow Violet Black
270 µHSilver Red Violet BrownRed Violet Brown
1 mHSilver Brown Black RedBrown Black Red

The tolerance band follows each code. Bourns gives two worked parts: 6.8 µH ±10% as silver, blue, gold, grey, silver, and 270 µH ±5% as silver, red, violet, brown, gold.

Below 10 µH the gold decimal point replaces the multiplier, so the band after the gold is a digit. From 10 µH up, the inductor color code calculator value matches the standard code once the wide silver band is set aside.

Treating the wide band as a first digit is the classic slip in an inductor color code calculator lookup. Silver has no digit value, so a code that starts with silver only makes sense as a military marking.

Standard Inductor Values Chart, 0.1 µH to 10 mH

Molded inductors come in E12 steps: 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68 and 82, times a power of ten. The chart shows the 10, 22 and 47 steps of each decade in all three marking styles.

An inductor color code calculator value off those steps deserves a second look at the bands, since red and orange, or brown and red, look alike in poor light.

Inductance4-band colorsMilitary bandsSMD code
100 nHBrown Black SilverSilver Gold Brown BlackR10
220 nHRed Red SilverSilver Gold Red RedR22
470 nHYellow Violet SilverSilver Gold Yellow VioletR47
1 µHBrown Black GoldSilver Brown Gold Black1R0
2.2 µHRed Red GoldSilver Red Gold Red2R2
4.7 µHYellow Violet GoldSilver Yellow Gold Violet4R7
10 µHBrown Black BlackSilver Brown Black Black100
22 µHRed Red BlackSilver Red Red Black220
47 µHYellow Violet BlackSilver Yellow Violet Black470
100 µHBrown Black BrownSilver Brown Black Brown101
220 µHRed Red BrownSilver Red Red Brown221
470 µHYellow Violet BrownSilver Yellow Violet Brown471
1 mHBrown Black RedSilver Brown Black Red102
2.2 mHRed Red RedSilver Red Red Red222
4.7 mHYellow Violet RedSilver Yellow Violet Red472
10 mHBrown Black OrangeSilver Brown Black Orange103

Bands hold only two digits, so a design value has to round. A 4.75 µH target becomes 4.8 µH, yellow, grey, gold, which is 1.05% high, and 123 µH becomes 120 µH, brown, red, brown, which is 2.44% low.

Rounding can also land between stock sizes. A 50 µH code, green, black, black, is valid, but 50 is not an E12 step, so the nearest parts on a distributor's shelf are 47 µH and 56 µH.

A hand-wound coil carries no bands at all. Its value comes from turns, diameter and length, which is the job of the Coil Inductance Calculator rather than an inductor color code calculator lookup.

LCR Meter Checks and Reactance by Frequency

Only an LCR meter at the right test frequency confirms an inductor color code calculator reading; a multimeter reads the wire's DC resistance. Bourns tests its 8250 chokes at 25 MHz for 0.1-1 µH, stepping down to 0.079 MHz for 12-100 mH.

XL is the inductive reactance in ohms, f is the frequency in hertz and L is the inductance in henries, so a 47 µH inductor color code calculator result enters as 0.000047 H.

Inductance60 Hz1 kHz100 kHz1 MHz10 MHz
1 µH377 µΩ6.28 mΩ628 mΩ6.28 Ω62.8 Ω
10 µH3.77 mΩ62.8 mΩ6.28 Ω62.8 Ω628 Ω
47 µH17.7 mΩ295 mΩ29.5 Ω295 Ω2.95 kΩ
100 µH37.7 mΩ628 mΩ62.8 Ω628 Ω6.28 kΩ
1 mH377 mΩ6.28 Ω628 Ω6.28 kΩ62.8 kΩ
10 mH3.77 Ω62.8 Ω6.28 kΩ62.8 kΩ628 kΩ

A 47 µH choke blocks 29.5 Ω at 100 kHz but only 17.7 mΩ at 60 Hz, so the same part that filters a switching supply does almost nothing on mains. For a tuned circuit, the LC Resonant Frequency Calculator pairs it with a capacitor.

DC resistance says little about the value. Frontier's 1202 series runs from 0.08 Ω to 72 Ω across 0.1-1,000 µH, so an ohmmeter proves the winding is intact but never confirms an inductor color code calculator reading.

SMD Inductor Codes Such as 4R7, 2N2 and 101

Chip inductors print digits instead of bands, still in microhenries: 101 is 10 × 10 µH = 100 µH, 4R7 is 4.7 µH with R as the decimal point, and 2N2 is 2.2 nH, where N marks the decimal and the nanohenry unit.

CodeInductanceWith tolerance letter
2N2B2.2 nH±0.1 nH, 2.1-2.3 nH
2N2S2.2 nH±0.3 nH, 1.9-2.5 nH
47N47 nHNo letter
R10100 nHNo letter
R47470 nHNo letter
1R0J1 µH±5%, 0.95-1.05 µH
4R74.7 µHNo letter
10010 µHNo letter
470K47 µH±10%, 42.3-51.7 µH
101100 µHNo letter
1021 mHNo letter

The Murata LQ part numbering guide uses N for nanohenries and letters for tolerance: W ±0.05 nH, B ±0.1 nH, C ±0.2 nH, S ±0.3 nH and D ±0.5 nH, then G 2%, J 5%, K 10% and M 20%.

Fixed nanohenry tolerances are tight in absolute terms but loose in percent. A 2.2 nH part at S, ±0.3 nH, can be 13.6% off, more than a ±10% molded choke.

Code 100 is 10 µH in any inductor color code calculator check, not 100 µH, since the last digit counts zeros. Chip resistors follow the same digit rule in ohms, covered by the SMD Resistor Code Calculator.

Choke Markings in Practice

Most misreads come from band position, since gold and silver each carry three meanings. An inductor color code calculator check is only as good as the band order it starts from, so the answers below begin there.

What are inductor color codes?

They are bands printed on axial, molded inductors that give the inductance in microhenries and its tolerance. Bands 1 and 2 are digits, band 3 is the multiplier and band 4 is the tolerance, following IEC 60062.

A military variant adds a wide silver band in front, and chip inductors replace the bands with printed codes such as 4R7. All three styles describe the same E12 values, so one inductor color code calculator chart covers them.

How do I convert colour codes to inductor values?

Write the first two bands as a two-digit number, multiply by the third band in µH, then apply the tolerance. Brown, green, red, gold is 15 × 100 µH = 1,500 µH, or 1.5 mH ±5%, read 1.425-1.575 mH.

On a molded part, start from the end where the bands sit closest together. If the third band is green or a higher digit color, look for a gold band in position 1 or 2, since that makes band 3 a digit.

Are inductor color codes the same as resistor color codes?

The digit colors are the same, from black 0 to white 9, but the unit differs. Yellow, violet, black is 47 µH on an inductor and 47 Ω on a resistor, so the body has to be identified before any inductor color code calculator lookup.

The multipliers also stop sooner. Resistor codes run to white × 109, while TDK's choke table ends at green × 100,000 µH, so blue, violet, grey or white as a multiplier only makes sense on a resistor.

What is the base unit of measurement for the inductor color code?

The base unit is the microhenry, µH. Black as a multiplier means × 1 µH, gold × 0.1 µH and silver × 0.01 µH, so the smallest 4-band inductor color code calculator value is 0.1 µH, or 100 nH.

Values of 1,000 µH and above are usually written in millihenries. Brown, black, red is 1,000 µH, which datasheets list as 1 mH, and brown, black, orange is 10,000 µH, or 10 mH.

What does a gold or silver multiplier mean in an inductor color code?

A gold multiplier divides the two digits by 10 and silver divides them by 100. Red, red, gold is 2.2 µH and red, red, silver is 0.22 µH, both common values for RF chokes.

Gold and silver are multipliers only in band 3. In band 4 they mean ±5% and ±10%, and in band 1 or 2 gold is a decimal point, as on military parts below 10 µH.

Which side should I read an inductor from?

Read from the end where the bands are bunched together; the tolerance band sits alone near the far end. An inductor color code calculator reading that starts with gold or silver as a plain band usually comes from reading backwards.

The exception is the military code, where a wide silver band comes first on purpose. Its double width is the cue that silver here is an identifier, not a multiplier.

What do 3-band, 4-band and 5-band inductors show?

A 3-band part shows two digits and a multiplier with no tolerance band, so it is ±20%. A 4-band part adds tolerance, and a 5-band part has a wide silver military band in front of the four.

A wide or double-width band near one end is that military identifier. Brown, black, red on a 3-band choke is 1 mH that may read 0.8-1.2 mH, while the same code with silver is 0.9-1.1 mH.

Can you substitute a color-coded axial inductor with a standard resistor of the same physical shape?

A resistor cannot replace an inductor even when the bands and body look alike. A 47 Ω resistor opposes current equally at every frequency, while a 47 µH choke rises from 17.7 mΩ at 60 Hz to 295 Ω at 1 MHz.

A meter tells them apart faster than any inductor color code calculator check. A resistor reads its marked ohms, while a choke reads a low DC resistance; Frontier's chokes stay under 72 Ω even at 1,000 µH.

Can I use this for SMD inductors?

Printed chip codes such as 101, 4R7, R47 and 2N2 decode with the same digit rule as an inductor color code calculator reading, in microhenries, or nanohenries where N is the decimal. A trailing letter is the tolerance, such as K for ±10%.

Many small chip inductors carry no marking at all. Their value has to come from the reel label or part number, such as Murata's, where 1N0 is 1.0 nH and R22 is 0.22 µH.

Why should I verify with an LCR meter?

Bands can fade, look alike under poor light or be printed off-spec, and a multimeter cannot measure inductance. An LCR meter reading inside the inductor color code calculator window, such as 42.3-51.7 µH for 47 µH ±10%, settles it.

Test at the datasheet frequency where possible. A 1 µH Bourns choke is specified at 25 MHz, and a reading taken at 100 kHz may differ because core and winding effects shift with frequency.

How do I change the color of my inductor?

The bands are part of the molded coating, so they cannot be recolored without damaging the part. If a band is worn or unclear, measure the value on an LCR meter and mark it on the board or a sleeve instead.

For a design change, the fix is a different part, not a new color. Moving from 47 µH to 56 µH means fitting a green, blue, black choke, the next E12 size up.