Carpet Calculator

Updated

Carpet calculator for the square yards cut from a 12 ft, 15 ft or metric roll, with seams, closets and stairs, plus pad, tack strip and the carpet, pad and install cost for a room.

Room and Roll

Measure wall to wall at the widest points; the roll is cut to fit.

Closet, Stairs & DoorwaysNo Closet · No Stairs · 3 ft Doors
More Rooms, Same CarpetOne Room Only
Trim, Pattern, Waste & Prices6 in Trim · 5% Pad · $22.50/sq yd
Roll Cut Plan
16.67 sq yd Carpet to Order
150 sq ft cut from a 12 ft roll
16 sq yd Carpeted Area
In Square Feet144 sq ft
Offcut Waste0.67 sq yd, 4%
The floor that gets carpet, and the share of the roll you pay for that ends up as offcut.
12.5 ft of Roll in 1 Cut
Price per Roll Foot$30.00/ft
Carpet Cost$375.00
Length to cut off the roll, every strip sized to the room plus trim, with the seam, cut and offcut details this room needs.
16.8 sq yd Pad With Waste
Tack Strip45 ft, 12 × 4 ft
Pad Cost$90.72
Pad covers the carpeted area plus pad waste, tack strip lines the walls minus openings in 4 ft lengths.
$609.72 Total Cost
Per Sq Ft Carpeted$4.23
Pad and Install$234.72
Carpet, pad and install at your rates, spread over the carpeted floor, with the pad and labor share that installers quote apart from the carpet.
Roll Width Comparison12 ft row marked
Roll WidthStripsRoll LengthOrderSeamsLaidCarpet Cost
12 ft112.5 ft16.67 sq yd096%$375.00
15 ft112.5 ft20.83 sq yd076.8%$468.75
4 m112.5 ft18.23 sq yd087.8%$410.10
5 m112.5 ft22.78 sq yd070.2%$512.63
Cost Breakdown$609.72 total
ItemQuantityRateCost
Carpet16.67 sq yd$22.50/sq yd$375.00
Pad16.8 sq yd$5.40/sq yd$90.72
Install16 sq yd$9.00/sq yd$144.00
Total16 sq yd laid$38.11/sq yd$609.72
Carpet and Cost by Floor AreaArea estimate, 10% carpet waste
Floor AreaCarpet With WasteCarpet CostWith Pad and Install
100 sq ft12.22 sq yd$275.00$438.00
144 sq ft (12 × 12)17.6 sq yd$396.00$630.72
200 sq ft24.44 sq yd$550.00$876.00
500 sq ft61.11 sq yd$1,375$2,190
1000 sq ft122.22 sq yd$2,750$4,380
Step-by-Step MathOrder = roll length × width
  1. Room = 12 ft × 12 ft = 144 sq ft; total 144 sq ft = 16 sq yd.
  2. Strips run along the length: 12 ft across ÷ 12 ft roll, rounded up = 1 strip.
  3. Each cut = 12 ft + 6 in trim = 12.5 ft; room roll length = 1 × 12.5 ft = 12.5 ft.
  4. Order = 12.5 ft × 12 ft = 150 sq ft = 16.67 sq yd.
  5. Pad = 144 sq ft × 1.05 = 151 sq ft.
  6. Cost = carpet $375.00 + pad $90.72 + install $144.00 on the carpeted area = $609.72.
  7. Result: 16.67 sq yd Carpet to Order.
No Side Trim Left at the Walls
The 12 ft span uses the full 12 ft roll width with under 3 in to spare. Walls that are out of square may need a wider roll or one more strip.

Roll Width Drives the Carpet Calculator Order

Every carpet calculator estimate starts from one fact: carpet is cut from a roll, so you pay for full roll width times the length you cut, not for the floor area. A 10 × 10 ft room is 11.11 sq yd of floor, yet off a 12 ft roll it takes a 10.5 ft cut, or 14 sq yd, because the extra 2 ft of width has nowhere to go.

n is the number of strips across the room, each strip ℓi is cut to the room's length along that strip, t is the trim allowance per cut and Rw is the roll width. Divide square feet by 9 for square yards.

S is the room span across the strips, the first number any carpet calculator roll plan needs. The last strip is the fill strip, and its width is whatever span is left after the full-width strips.

The trim allowance in carpet calculator math comes from the installation standard. CRI 105, the Carpet and Rug Institute's residential installation standard, calls for at least 3 in along each wall for trimming, which is 6 in on every cut.

The common shortcut of area plus 10% ignores roll width. It lands close for a room whose width matches the roll and badly short for any room just wider than it, which is where most carpet calculator estimates go wrong.

12x12, 10x10 and 10x12 Rooms in Square Yards

In carpet calculator square yards, a 12 × 12 ft room needs 16.67 sq yd of carpet off a 12 ft roll: one 12.5 ft cut with no seam. Area plus 10% says 17.6 sq yd, so the area rule overbuys by nearly a square yard here.

RoomFloor AreaCut From 12 ft RollOrderArea + 10%Floor Laid
10 × 10 ft11.11 sq yd10.5 ft14.00 sq yd12.22 sq yd79.4%
10 × 12 ft13.33 sq yd10.5 ft14.00 sq yd14.67 sq yd95.2%
12 × 12 ft16.00 sq yd12.5 ft16.67 sq yd17.60 sq yd96.0%
12 × 14 ft18.67 sq yd14.5 ft19.33 sq yd20.53 sq yd96.6%
12 × 15 ft20.00 sq yd15.5 ft20.67 sq yd22.00 sq yd96.8%

The 10 × 10 room is the carpet calculator trap in the other direction. Area plus 10% says 12.22 sq yd, but a single 10.5 ft cut off a 12 ft roll is 14 sq yd, and a 2 ft wide offcut is left over. Order the smaller figure and the room cannot be done in one piece.

A 10 × 12 room costs the same carpet as a 10 × 10 room when the 12 ft wall runs along the roll width. Lay the strip with its 12 ft edge across the roll and cut only 10.5 ft of length.

For any carpet size calculator, UK or US, measure wall to wall at the widest point of each direction and round up to the next inch. Walls are rarely square, and the 6 in trim allowance per cut only covers small errors.

Fifteen-Foot Rolls for Rooms Wider Than 12 ft

In a carpet calculator by square feet, a room 13 to 15 ft wide is the costliest size to carpet from a 12 ft roll. A 13 × 14 ft room needs 36 sq yd from a 12 ft roll but only 22.5 sq yd from a 15 ft roll, because the narrow 2 ft fill strip still has to come off the roll at full length.

RoomFloor Area12 ft Roll Order12 ft Seams15 ft Roll Order15 ft SeamsArea + 10%
13 × 14 ft20.22 sq yd36.00 sq yd122.50 sq yd022.24 sq yd
14 × 16 ft24.89 sq yd38.67 sq yd127.50 sq yd027.38 sq yd
15 × 20 ft33.33 sq yd41.33 sq yd134.17 sq yd036.67 sq yd
16 × 18 ft32.00 sq yd44.00 sq yd155.00 sq yd135.20 sq yd
20 × 20 ft44.44 sq yd54.67 sq yd168.33 sq yd148.89 sq yd

Above 15 ft the carpet calculator comparison flips. A 16 × 18 ft room needs a seam on either roll, and the 15 ft roll leaves a 3 ft fill strip against a 6 ft fill on the 12 ft roll, so the 12 ft roll wins by 11 sq yd.

Ask the store which widths your carpet style comes in before you price it. Not every style is made in both, and a carpet price calculator quote built on the wrong width can be off by a third.

Metric rolls follow the same logic. Tapi Carpets in the UK stocks 4 m rolls and lists 5 m as its widest, and a 12 × 12 ft room cut from a 4 m roll takes 18.23 sq yd, or 15.24 m², because 4 m is about 13.1 ft wide.

Closets, Doorways, L-Shapes and Extra Rooms

Add closets and halls to the carpet calculator roll plan rather than the area. A 2 × 6 ft closet off a 12 × 10 ft room costs no extra carpet: the 10 ft span leaves a 2 ft offcut beside the strip, and the closet fits inside it.

Make that closet 3 ft deep and it no longer fits the offcut. The order rises from 16.67 to 18.67 sq yd for 6 sq ft more floor, which is why closet depth is worth measuring to the inch.

An L-shaped room often needs no seam at all in a carpet cutting calculator layout. A 12 × 12 ft room with a 6 × 4 ft alcove on one wall fits a single 12 ft wide strip cut 16.5 ft long, or 22 sq yd, and the corner notch is trimmed out of the one piece.

Doorways change seams and tack strip, not yardage. CRI 105 says seams should not run perpendicular to doorway openings and tack strip should not cross door openings or sills.

Rooms carpeted together are still cut one at a time in a carpet calculator plan. A 12 × 12 ft room and a 10 × 11 ft room take 12.5 ft and 10.5 ft of a 12 ft roll, 23 ft in all, or 30.67 sq yd. Offcut from one room only helps another if it fits with the pile running the same way.

Stairs Add Carpet by the Step

In a carpet calculator for stairs, thirteen steps 3 ft wide add 6.33 ft of 12 ft roll, or 8.44 sq yd, when each step takes 19 in of tread, riser and nose. Four step pieces fit across a 12 ft roll, so the 13 steps take four 19 in rows.

Measure one step with a flexible tape from the back of the tread, over the nose and down to the next tread. Each 2 in on that measurement adds 8 in of roll for 13 steps, since every row of four pieces grows by the same amount.

Carpet per StepRows of 4 on a 12 ft RollRoll Length for 13 Steps12 × 12 Room Plus Stairs
17 in45.67 ft24.22 sq yd
19 in46.33 ft25.11 sq yd
21 in47.00 ft26.00 sq yd

Step pieces are cut with the roll length running down the stairs. CRI 105 asks for the machine direction in the length direction of the stairs, and notes most makers want the pile running down them, so pieces cannot be turned sideways to save carpet.

Stair labor is often quoted per step rather than by area. At a $1.00 per sq ft install rate, 13 steps of 3 ft × 19 in come to $61.75, so a per-step quote above $4.75 a step costs more than the area rate.

When a room leaves a wide enough offcut, some step pieces come out of it for free. For a full staircase with landings and winders, the Stair Carpet Calculator works step by step.

Patterned Carpet and Seam Placement

Every piece in a room must have its pile running the same way, which limits offcut reuse in any carpet calculator plan. CRI 105 requires the same pile direction unless the maker says otherwise, so offcut can only fill gaps that run the same direction as the main strip.

A pattern repeat adds length to every seamed strip, because each strip must start at the same point in the pattern. A 14 × 16 ft room with a 27 in repeat rises from 38.67 to 42 sq yd off a 12 ft roll, as each 14.5 ft cut rounds up to seven repeats, or 15.75 ft.

A room cut as one strip with no closet piece has no seam to match, so it needs no extra for the repeat in a carpet calculator order, however large the pattern.

Seam placement decides how a room looks for years. CRI 105 asks for main traffic to run parallel to a seam rather than across it, and for natural light not to strike across a seam, so seams usually run away from the main window.

Pad, Tack Strip and Seam Tape

Pad in a carpet calculator estimate covers the carpeted floor plus about 5% for trimming. A 12 × 12 ft room takes 151 sq ft, or 16.8 sq yd, of pad, which costs less waste than carpet because pad has no pile direction and pieces together freely.

Pad seams should not sit under carpet seams. CRI 105 places cushion seams at right angles to carpet seams or at least 6 in away from them, so a seam in the carpet never falls on a joint in the pad.

Tack strip runs around the walls, less doorways, and is commonly sold in 4 ft sticks. A 12 × 12 ft room with one 3 ft doorway needs 45 ft, or 12 sticks. CRI 105 sets the gap between strip and wall at slightly less than carpet thickness, but no more than 3/8 in.

Seam tape runs the full length of every seam. The 14 × 16 ft room off a 12 ft roll has one seam 14 ft long, while the same room off a 15 ft roll has none, which also saves a seaming charge on many installation quotes.

Price per Square Foot, Yard and Meter

For a carpet calculator cost per square foot, multiply every price by the quantity it applies to. Carpet is priced on the order including offcut, while pad and installation are priced on the floor laid.

At $2.50 per sq ft carpet, $0.60 pad and $1.00 install, a 12 × 12 ft room comes to $609.72, or $4.23 per sq ft of floor.

RoomCarpet OrderCarpetPadInstallTotalPer Sq Ft of Floor
10 × 10 ft (100 sq ft)14.00 sq yd$315.00$63.00$100.00$478.00$4.78
10 × 12 ft (120 sq ft)14.00 sq yd$315.00$75.60$120.00$510.60$4.25
12 × 12 ft (144 sq ft)16.67 sq yd$375.00$90.72$144.00$609.72$4.23
10 × 20 ft (200 sq ft)27.33 sq yd$615.00$126.00$200.00$941.00$4.71
1,000 sq ft, area + 10%122.22 sq yd$2,750.00$630.00$1,000.00$4,380.00$4.38

In this carpet estimator calculator comparison, the 10 × 10 room costs more per square foot than the 12 × 12 room because 21% of its carpet is offcut. Swap in your own quoted rates; the order quantities stay the same whatever the price.

Prices come in three units. A price per square yard is 9 times the price per square foot, so $2.50 per sq ft is $22.50 per sq yd. One square meter is 1.196 sq yd, so a carpet calculator in meters quoting $26.91 per m² matches the same $2.50 per sq ft.

Some stores price by the roll foot, a figure worth converting before any carpet price calculator comparison. At $2.50 per sq ft, a 12 ft roll costs $30 per linear foot of cut, which is the fastest way to check a quote: the 12.5 ft cut for a 12 × 12 room is $375.

Labor quotes often add charges per step, for furniture moving and for removing old carpet. The Carpet Installation Cost Calculator breaks those out, and the Flooring Calculator compares carpet with hard floors for the same rooms.

Circles, Ovals and Real Estate Carpet Area

For curved rooms, carpet calculator math still runs on strips: a round room 12 ft across has 113 sq ft of floor but takes the same 16.67 sq yd as a 12 × 12 ft room, because it is cut from a 12 ft wide strip 12.5 ft long. Curved rooms buy their bounding rectangle and trim the rest away as offcut.

D is the diameter. An oval uses π × length × width ÷ 4, and a regular hexagon or octagon uses its side length, but each still orders from the strip widths that cross it, not from the area.

In Indian real estate, carpet area means something else. The Real Estate (Regulation and Development) Act, 2016 defines it as the net usable floor area inside the external walls, excluding balconies and service shafts, so a 1,000 sq ft built-up flat has a smaller carpet area set by its plan.

For a carpet calculator order, measure the rooms themselves rather than relying on a builder's carpet area figure. Bathrooms and kitchens rarely get carpet, so the carpeted floor is usually well below either number.