Painting Cost Calculator

Updated

Painting cost calculator for one room, a whole home by carpet area or a house exterior, pricing walls, ceiling, trim and doors per sq ft, with paint in gallons or litres and labor.

Surfaces, Size and Coats

Enter the room size. Doors and windows come off the wall area, and baseboard trim runs the room edge less each doorway.

coats
ft
ft
ft
rooms
sq ft
× floor
sq ft
sq ft
ft
doors
windows
gables
in 12
coats
Painter Rates and Minimum Job$1-$2/sq ft walls, $375 minimum

Rates load as typical US painter prices with paint included, for a two-coat job. Swap in your own quotes.

$/sq ft
$/sq ft
$/sq ft
$/ft
$/ft
$/door
$/door
$
$/sq ft
$/sq ft
Paint, Primer and DIY Supplies$32.50/gal paint, 350 sq ft/gal

Coverage loads at the low end of the 350 to 400 sq ft per gallon that paint makers print for one coat. Use the figure on your can.

$/gal
sq ft/gal
$/gal
$
%
$/hr
Door and Window SizesDoor 36 × 80 in, window 36 × 60 in

Each opening is cut from the wall area. Door width also comes off the baseboard run.

in
in
in
in
Painting Cost
$965 Midpoint Estimate
Pro bid range $613 - $1,316
493 sq ft to Paint
Walls After Openings349 sq ft
Ceiling144 sq ft
Walls net of doors and windows plus any ceiling. Trim and doors are priced by the foot and by the door.
3 Gallons of Paint
Exact Paint Needed2.82 gal
Left Over for Touch-Ups0.18 gal
Area times coats divided by coverage, rounded up to whole gallons. Trim and door enamel is bought apart from wall paint.
$223 DIY Materials
Paint and Primer$97.50
Saved vs. Midpoint$742
Wall paint, primer and supplies. Trim and door enamel, ladders and patching are not counted, so real savings run lower.
$1.96/sq ft Pro Rate
Labor Share of Midpoint76.9%
Hours Billed at $35/hr21.2 hrs
Midpoint over the painted area. Labor is the midpoint less DIY materials, turned into hours at the billing rate you enter.
Surface Map With Your Numbers493 sq ft painted
Ceiling 144 sq ft×112 ft×112 ft12 ft12 ftWalls 349 sq ft after 35 sq ft of openings3 gal at 2 coats · 45 ft of trim8 ft walls, 493 sq ft to paint
Bid Line by Line and Paint by Coats4 bid lines, 4 coat options
ItemAmountRateLowHigh
Walls349 sq ft$1.00 - $2.00/sq ft$349$698
Ceiling144 sq ft$1.00 - $2.00/sq ft$144$288
Trim45 ft$1.00 - $4.00/ft$45$180
Doors1 door$75.00 - $150.00/door$75$150
Total Bid493 sq ft$1.24 - $2.67/sq ft$613$1,316
Step-by-Step Painting Cost Math11 steps
Wall area2 × (12 + 12) ft × 8 ft = 384 sq ft
Openings cut(1 × 20 + 1 × 15) sq ft = 35 sq ft
CeilingEqual to the floor = 144 sq ft
Surface to paint384 sq ft - 35 sq ft + 144 sq ft = 493 sq ft
Trim length(48 ft - 1 × 3 ft) = 45 ft
Paint493 sq ft × 2 ÷ 350 sq ft/gal = 2.82 gal, buy 3
DIY materials3 × $32.50 + $125.00 supplies = $222.50
Low bid349 × $1.00 + 144 × $1.00 + 45 × $1.00 + 1 × $75.00 = $613.00
High bid349 × $2.00 + 144 × $2.00 + 45 × $4.00 + 1 × $150.00 = $1,316.00
Midpoint($613.00 + $1,316.00) ÷ 2 = $964.50
Labor and hours$964.50 - $222.50 = $742.00 (76.9%) ÷ $35.00/hr = 21.2 hrs
Labor Share Matches Typical Bids
76.9% of the midpoint pays for labor, inside the 70% to 85% range typical of painting jobs. Keep the 0.18 gal left over for touch-ups.

Painting Cost Calculator Breakdown for a 12 x 12 Bedroom

Painting a 12 by 12 ft bedroom with 8 ft walls costs $613 to $1,316, with a $965 midpoint. That covers two coats on the walls and ceiling, the baseboard trim and one door, at typical US painter rates with paint included.

L and W are the room length and width and H the wall height. The bracket removes each door at 20 sq ft and each window at 15 sq ft, which are a 36 by 80 in door and a 36 by 60 in window, and L W adds the ceiling.

Odd-shaped rooms with alcoves or sloped walls are easier to measure one wall at a time with the Wall Square Footage Calculator.

Bid lineAmountRateLowHigh
Walls349 sq ft$1 to $2 per sq ft$349$698
Ceiling144 sq ft$1 to $2 per sq ft$144$288
Baseboard trim45 ft$1 to $4 per ft$45$180
Door1 door$75 to $150 each$75$150
Total bid493 sq ft$1.24 to $2.67 per sq ft$613$1,316

Trim runs the 48 ft room edge less the 3 ft doorway. The $1.96 per sq ft midpoint is the painting cost per square foot of surface, and it is the figure to hold any bedroom quote against.

Against that painting cost calculator midpoint, doing it yourself takes 3 gallons of paint at $32.50 and $125 of rollers, tape and drop cloths, or $223. The other $742, 76.9% of the midpoint, is what a painter charges for labor and overhead.

Bedroom Sizes From 10 x 10 to 20 x 20

In a painting cost calculator comparison, a 10 by 10 ft room costs about $783 at the midpoint, and a 20 by 20 ft room about $1,813. Each room has 8 ft walls, one door, one window, the ceiling and baseboard trim.

RoomSurfaceBid rangeMidpointPaint to buyWalls only, midpoint
10 x 10 ft385 sq ft$497 to $1,068$7833 gal$473
10 x 12 ft437 sq ft$553 to $1,188$8713 gal$505
12 x 12 ft493 sq ft$613 to $1,316$9653 gal$537
12 x 14 ft549 sq ft$673 to $1,444$1,0594 gal$572
10 x 20 ft645 sq ft$777 to $1,668$1,2234 gal$668
15 x 20 ft825 sq ft$967 to $2,068$1,5185 gal$788
20 x 20 ft1,005 sq ft$1,157 to $2,468$1,8136 gal$908

The 10 by 20 ft row answers the 200 sq ft room question, at $1,223 for walls, ceiling, trim and door. Walls alone in rooms up to 12 by 12 ft price above the plain $1 rate, because the $375 minimum job charge lifts their low bids.

Every number in a painting cost calculator estimate starts from surface area, not floor area. A 20 by 20 room has four times the floor of a 10 by 10 room, but only 2.6 times the painted surface.

Carpet Area Rule: 2.5x for Walls, 1x for the Ceiling

Wall area is about 2.5 times the floor (carpet) area, and the ceiling about 1 times, so walls and ceiling together are about 3.5 times the floor. Asian Paints uses the same 2.5 factor for walls and counts the ceiling separately.

The 3.5 figure often quoted for paintable area is that sum, walls plus ceiling. Applying 3.5 to walls alone and then adding the ceiling again counts the ceiling twice and overstates a 1,000 sq ft home by 1,000 sq ft of surface.

RoomWall heightNet wallsWalls per sq ft of floor
10 x 10 ft8 ft285 sq ft2.85
12 x 12 ft8 ft349 sq ft2.42
12 x 12 ft9 ft397 sq ft2.76
12 x 12 ft10 ft445 sq ft3.09
15 x 20 ft8 ft525 sq ft1.75
20 x 20 ft8 ft605 sq ft1.51

The 2.5 rule fits a 12 by 12 room with 8 ft walls almost exactly, at 2.42, but it drifts at both ends of the size range.

It undercounts small rooms and tall walls in any painting cost calculator estimate built on floor area, where the ratio climbs past 3. Open living areas fall to about 1.5.

A home of 12 by 12 bedrooms with 10 ft ceilings needs about a quarter more wall paint than the rule predicts. For those homes, a wall painting cost calculator figure built from each room's size is worth the extra measuring.

Whole-Home Paint Costs for 500 to 2,000 sq ft

A painting cost calculator total for the walls and ceilings of a 1,000 sq ft home is about $3,500 to $7,000, with a $5,250 midpoint. That is 3,500 sq ft of surface at the 2.5 and 1 factors, with two coats, before trim and doors.

Floor areaWalls and ceilingBid rangeMidpointPaint, 2 coatsDIY materials
500 sq ft1,750 sq ft$1,750 to $3,500$2,62510 gal (37.9 L)$450
800 sq ft2,800 sq ft$2,800 to $5,600$4,20016 gal (60.6 L)$645
1,000 sq ft3,500 sq ft$3,500 to $7,000$5,25020 gal (75.7 L)$775
1,200 sq ft4,200 sq ft$4,200 to $8,400$6,30024 gal (90.8 L)$905
1,500 sq ft5,250 sq ft$5,250 to $10,500$7,87530 gal (113.6 L)$1,100
2,000 sq ft7,000 sq ft$7,000 to $14,000$10,50040 gal (151.4 L)$1,425

Walls alone in the 1,000 sq ft home cost $2,500 to $5,000, so the ceilings add about $1,500 at the midpoint. Skipping ceilings that are still clean is the largest single saving in a 1000 sq ft house paint cost.

Labor grows faster than materials on bigger jobs. The fixed $125 for supplies spreads over more area, so materials fall to about 14% of a 2,000 sq ft painting estimate calculator total, against 23% for one bedroom.

Gallons and Litres of Paint by Area

Two coats need 2 gallons for 200 to 300 sq ft of wall and 3 gallons for 400 sq ft, the paint line under any painting cost calculator labor total.

Paint makers rate a gallon at 350 to 400 sq ft per coat, and the Sherwin-Williams Harmony data sheet lists exactly that range.

G is the gallons to buy, A the area, n the number of coats and C the coverage of one coat. Using the low 350 sq ft figure leaves a little over for touch-ups instead of a short final wall.

Wall areaPaint for 2 coatsGallons to buyLitres for 2 coatsLitres to buy
100 sq ft0.57 gal12.16 L3
200 sq ft1.14 gal24.33 L5
300 sq ft1.71 gal26.49 L7
400 sq ft2.29 gal38.65 L9
500 sq ft2.86 gal310.82 L11
1,000 sq ft5.71 gal621.63 L22

At 350 sq ft per gallon, one litre covers 92.46 sq ft, or 8.59 m², per coat. So 10 litres paint 462 sq ft with two coats, and 20 litres paint 925 sq ft, enough for the walls of about 2.6 rooms of 12 by 12 ft.

Coats change a painting cost calculator paint order fast. The 12 by 12 bedroom needs 2 gallons for one coat, 3 for two, 5 for three and 6 for four, and most color changes or fresh drywall need the full two coats to hide.

To order paint without pricing labor, the Paint Calculator covers the gallon count for a room on its own.

Walls, Ceiling, Trim and Doors as Separate Bid Lines

Each surface adds its own line to a painting cost calculator bid. For the 12 by 12 room, walls alone are $537 at the midpoint, walls and ceiling $740, walls with trim and door $749, and all four together $965.

Surfaces in the 12 x 12 roomBid rangeMidpointWall paint to buy
Walls only$375 to $698$5372 gal
Walls and ceiling$493 to $986$7403 gal
Walls, trim and door$469 to $1,028$7492 gal
Walls, ceiling, trim and door$613 to $1,316$9653 gal

Trim and doors take a separate enamel, usually semi-gloss, bought by the quart. Wall gallons above cover flat or eggshell wall paint only, so add a quart of trim paint to any DIY shopping list that includes baseboards and a door.

Trim is cheap in paint but slow in labor. At $1 to $4 per foot, 45 ft of baseboard adds $45 to $180. The high rate is four times the low because every foot is cut in by brush against the wall and floor.

Painter Rates Per Day and Per sq ft

In the 12 by 12 painting cost calculator bid, labor is $742, or $1.51 per sq ft of surface, while paint and supplies are $0.45 per sq ft. Painting labor cost per sq ft with material comes to the full $1.96.

A painter's own wage is far below the billed rate. The US Bureau of Labor Statistics puts the median pay for construction and maintenance painters at $48,660 a year in May 2024, about $23.40 an hour.

At that wage, an 8-hour day is about $187 in pay. A contractor bills more to cover insurance, travel, equipment and profit, so a per-day price of $280 at $35 an hour, or well above, is common.

Dividing the $742 labor by an hourly rate shows the time a bid pays for. It is 31.7 hours at $23.40, 21.2 hours at $35 and 9.9 hours at $75, and a pro painting one bedroom in about a day implies a billing rate near the top of that list.

Minimum Job Charges on Small Rooms

Small jobs cost at least the painter's minimum, set here at $375. A 5 by 8 ft bathroom with 8 ft walls has 188 sq ft of wall, which bids at $188 to $376 before the minimum and $375 to $376 after it.

Below about 375 sq ft of wall at $1 per sq ft, the minimum sets the painting cost calculator low bid. Adding a hallway, closet or touch-ups to the same visit costs little extra until the job passes that threshold.

Small rooms also skew the labor split. In the bathroom, paint and supplies are $190 of the $376 midpoint, so a painting labor cost estimate calculator figure there says more about the minimum than about the labor.

Exterior House Painting by Siding Area

Painting the siding of a 40 by 30 ft two-story house with 18 ft walls, 2 doors, 12 windows and two 6 in 12 gable ends costs $1,263 to $11,363, with a $6,313 midpoint.

That is 2,525 sq ft of siding, including 225 sq ft of gables, at $0.50 to $4.50 per sq ft, a spread wide enough that an exterior painting cost calculator figure needs the siding type beside it.

HouseWall heightSiding with gables, after openingsBid rangeMidpointPaint, 2 coats
40 x 30 ft9 ft1,265 sq ft$633 to $5,693$3,1638 gal
40 x 30 ft18 ft2,525 sq ft$1,263 to $11,363$6,31315 gal
50 x 30 ft18 ft2,885 sq ft$1,443 to $12,983$7,21317 gal

The 9-to-1 spread in exterior rates reflects siding type, height, scraping and caulking, so an exterior painting cost calculator range this wide needs real quotes to narrow.

Adding 250 ft of trim at $1 to $3 per foot, for corner boards, casings and fascia, lifts the two-story midpoint to $6,813.

Gable ends sit above the eave line, so wall height times perimeter misses them. Each triangle is half the house width times its rise, which reduces to the width squared times the roof pitch over 48.

W is the gable end width in feet and P the pitch as inches of rise per 12 in of run. On a 30 ft wide house, two gables add 150 to 450 sq ft to any exterior painting cost calculator siding count.

Roof pitchOne gable, 30 ft wideTwo gablesAdded bid at $0.50 to $4.50
4 in 1275 sq ft150 sq ft$75 to $675
6 in 12112.5 sq ft225 sq ft$113 to $1,013
8 in 12150 sq ft300 sq ft$150 to $1,350
12 in 12225 sq ft450 sq ft$225 to $2,025

A steep 12 in 12 roof doubles the gable area of a 6 in 12 roof on the same house, so measure the pitch before comparing exterior quotes.

Primer, Texture and Rough Surfaces

One coat of primer on the 12 by 12 room adds 2 gallons at $20, lifting the painting cost calculator DIY materials from $223 to $263. New drywall, bare wood, stains and big color changes are the usual reasons to prime first.

Fresh board and patches both need that primer coat. The Drywall Cost Calculator prices new board, and the Drywall Repair Cost Calculator prices patches before the painter arrives.

In a painting cost calculator total, textured walls cost more because the surface holds more paint and takes longer to roll.

A texture add-on of $0.80 to $2 per sq ft of wall lifts the 12 by 12 room's range to $892 to $2,014, a $1,453 midpoint.

Rough, porous or bare surfaces drink paint. Valspar rates its professional flat at 350 to 450 sq ft per gallon on smooth surfaces and 250 to 350 on rough ones, so a rough wall can need about a third more paint.

Short Answers on Painting Prices

The bedroom in these answers is the same 12 by 12 ft room priced at the top, with 8 ft walls, one door and one window.

How much does it cost to paint a 12x12 room in India?

The price comes from a local per-sq-ft rate applied to 493 sq ft of surface. A 12 by 12 ft room with 8 ft walls has 349 sq ft of wall and 144 sq ft of ceiling, which painters in India quote together by paint grade.

A painting cost calculator India estimate works the same way for a whole flat, with walls at 2.5 times the carpet area and the ceiling at 1 times, so a 1,000 sq ft flat has about 3,500 sq ft to price.

What is a good price to charge for painting a room?

For a 12 by 12 ft bedroom with walls, ceiling, trim and one door, $613 to $1,316 sits inside typical US pricing, with $965 at the midpoint. A quote under about $410 barely covers the $223 of paint and supplies plus one day at the median painter wage.

Quote the surfaces as separate lines so a customer can drop the ceiling or trim and see exactly how much the total falls.

Separate lines also make a painting cost calculator comparison fair. A $375 minimum protects small jobs like a single bathroom, where travel and setup cost as much as the painting.