Drywall Cost Calculator

Updated

Drywall cost calculator for rooms or a known board area, pricing finish Levels 0 to 5 with sheet count, mud, tape and screws, removal, DIY labor savings and metric or local prices.

Room Size, Finish Level and Price

Measure one room. Use the room count for several rooms of the same size. Doors and windows are in the first panel below.

ft
rooms
$/sq ft
Doors, Windows and Sloped Walls1 doors, 1 windows, 0 triangles

Enter totals for all rooms. Sloped walls are triangles, such as under a stair or an attic roof.

doors
windows
triangles
ft
Sheet Size and DIY Supplies4 × 8 ft at $12.8, 10% waste

Used for the sheet count and the do-it-yourself materials cost. Supplies cover mud, tape and screws.

$/sheet
%
$/sq ft
Removal, Add-Ons and Local PriceRemoval $0/sq ft, $0 add-ons, 0%

Set removal above 0 when old drywall comes out first. The local adjustment changes contractor prices only.

$/sq ft
$ total
%
Drywall Cost, Hung and Finished
$1,205 Midpoint Estimate
Bid range $836 - $1,574 at Level 4 finish
17 Sheets of 4 × 8 ft
Net Drywall Area492 sq ft
Gross Before Openings528 sq ft
Sheets cover the net area plus waste, rounded up. Longer sheets mean fewer butt joints to tape.
4.43 gal of Joint Compound
Joint Tape, 1 Roll of 250 ft182 ft
Drywall Screws1.3 lb
Per 1,000 sq ft of board: 9 gal of lightweight mud in 4.5 gal pails, 370 ft of tape and 2.7 lb of screws.
$2.45/sq ft All-In
Hung and Finished per Sheet$78.40
Per sq ft of Floor Area$8.37
Midpoint total over the net drywall area with removal and add-ons, the figure to compare bids.
$587 DIY Materials
Labor You Would Save$619
Sheets Alone$218
Doing it yourself, you pay only for the sheets and supplies. The rest of the installed price is labor.
Sheet Layout on the Longest Wall2 rows of 4 × 8 ft
2 rows of 4 × 8 ft sheets hung sideways, butt joints staggered12 ft wall8 ft1.5 sheet lengths per row
Cost by Finish Level and Sheet Size6 finish levels, 4 sheet sizes
FinishWhat You GetInstalled per sq ftTotal for This Job
Level 0Hung and fastened, no tape or mud$0.85 - $1.90$418 - $935
Level 1Tape set in mud at joints only$1.15 - $2.15$566 - $1,058
Level 2One coat over tape; garages, tile backer$1.30 - $2.60$640 - $1,279
Level 3Two coats; walls getting heavy texture$1.50 - $2.75$738 - $1,353
Level 4Three coats; flat paint or light texture$1.70 - $3.20$836 - $1,574
Level 5Full skim coat; eggshell, gloss or dark paint, raking light$1.75 - $3.50$861 - $1,722
Sheet SizeSheetsPrice EachSheet CostBoard Bought
4 × 8 ft17$12.80$218544 sq ft
4 × 9 ft16$14.40$230576 sq ft
4 × 10 ft14$16.00$224560 sq ft
4 × 12 ft12$19.20$230576 sq ft
Step-by-Step Drywall Cost Math13 steps
Wall area1 room × 2 × (12 + 12) ft × 8 ft = 384.00 sq ft
Ceiling area1 room × 12 × 12 ft = 144.00 sq ft
Sloped wall triangles0 × ½ × 6.00 × 4.00 ft = 0.00 sq ft
Doors and windows1 × 21.00 + 1 × 15.00 = 36.00 sq ft
Net drywall area528.00 - 36.00 = 492.00 sq ft
Sheets492.00 sq ft × 1.1 ÷ 32.000 sq ft per sheet = 16.91 → 17 sheets
Compound, tape, screws492.00 sq ft × 0.009 gal = 4.43 gal (1 pail of 4.5 gal); × 0.37 ft = 182 ft tape; × 0.0027 lb = 1.33 lb screws
Installed price range492.00 sq ft × $1.70/sq ft to $3.20/sq ft = $836.40 to $1,574.40
Old drywall removal492.00 sq ft × $0.00/sq ft = $0.00
Low and high totals$836.40 + $0.00 = $836.40; $1,574.40 + $0.00 = $1,574.40
DIY materials17 × $12.80 + 492.00 sq ft × $0.75/sq ft = $586.60
Labor you would save$1,205.40 installed midpoint - $586.60 = $618.80
Midpoint estimate($836.40 + $1,574.40) ÷ 2 = $1,205.40
Level 4 Finish Priced
Level 4: three coats; flat paint or light texture. Level 4 suits flat paint; eggshell or glossier sheens, dark colors or strong side light call for Level 5.

Drywall Cost Calculator Example: One 12 x 12 Room

A 12 by 12 ft room with 8 ft walls, one door and one window takes 492 sq ft of drywall on the walls and ceiling. Hung and finished to Level 4, it bids at $836 to $1,574, with a $1,205 midpoint.

N is the number of identical rooms, L and W the room length and width, and H the ceiling height. The triangle term covers sloped walls under stairs or attic roofs, and the last term removes every door and window.

P is the installed price per sq ft at the chosen finish level, run at the low and high quote to set the drywall cost calculator bid range. R is any removal rate for old board and F any flat add-ons such as delivery or texture.

LineMathResult
Walls2 × (12 + 12) ft × 8 ft384 sq ft
Ceiling12 ft × 12 ft144 sq ft
Door and window21 + 15 sq ft36 sq ft
Net drywall384 + 144 - 36492 sq ft
4 x 8 sheets492 × 1.10 ÷ 32 = 16.9117 sheets
Level 4 installed492 sq ft × $1.70 to $3.20$836 to $1,574
Midpoint($836.40 + $1,574.40) ÷ 2$1,205, or $2.45 per sq ft

The ceiling is 29% of the board in this room, so a walls-only price misses a large share of the job.

Per sq ft of floor, the same room costs $8.37, which is the drywall cost calculator by square footage figure people often confuse with the board price.

The Drywall Calculator handles the sheet, screw and mud count alone, and the Wall Square Footage Calculator nets doors and windows out of each wall.

Room Sizes From 10 x 10 to 15 x 20, Walls and Ceiling

A drywall cost calculator estimate for a 10 by 10 ft room needs 14 sheets of 4 x 8 board and runs about $941 at Level 4, while a 15 by 20 ft room needs 29 sheets and about $2,019. Each room has 8 ft walls, one 21 sq ft door and one 15 sq ft window.

RoomNet drywall4 x 8 sheetsLevel 4 bid rangeMidpointBoard per sq ft of floorCost per sq ft of floor
10 x 10 ft384 sq ft14$653 to $1,229$9413.84$9.41
12 x 12 ft492 sq ft17$836 to $1,574$1,2053.42$8.37
12 x 14 ft548 sq ft19$932 to $1,754$1,3433.26$7.99
14 x 16 ft668 sq ft23$1,136 to $2,138$1,6372.98$7.31
15 x 20 ft824 sq ft29$1,401 to $2,637$2,0192.75$6.73

Small rooms carry more wall per sq ft of floor, so they cost more per floor sq ft in any drywall cost calculator comparison. A 10 by 10 room needs 3.84 sq ft of board for each sq ft of floor, against 2.75 in a 15 by 20 room.

Splitting the 12 by 12 room by surface shows how the work divides. Walls alone take 348 sq ft, 12 sheets and a $853 midpoint, while the ceiling alone takes 144 sq ft, 5 sheets and a $353 midpoint.

A drywall calculator for walls and ceiling should add both, since installers price them together. Openings come off the walls only, so a drywall ceiling cost calculator estimate never subtracts doors or windows.

Finish Levels 0 to 5 and What Each Adds per sq ft

The finish level sets most of the labor in a drywall cost calculator total, from $0.85 per sq ft for board hung with no tape to $3.50 for a skim-coated wall. On 1,000 sq ft of board, the midpoint climbs from $1,375 at Level 0 to $2,625 at Level 5.

LevelGA-214 workTypical useInstalled per sq ft1,000 sq ft rangeMidpoint
0No tape or compoundTemporary work$0.85 to $1.90$850 to $1,900$1,375
1Tape set in compoundAttics, plenums, concealed areas$1.15 to $2.15$1,150 to $2,150$1,650
2Thin coat over tape, 1 coat on fastenersGarages, tile substrate$1.30 to $2.60$1,300 to $2,600$1,950
31 more coat on joints, 2 on fastenersMedium or heavy texture$1.50 to $2.75$1,500 to $2,750$2,125
42 more coats on joints, 3 on fastenersFlat paint, light texture$1.70 to $3.20$1,700 to $3,200$2,450
5Level 4 plus a full skim coatSheen or dark paint, critical light$1.75 to $3.50$1,750 to $3,500$2,625

The work and use columns follow the Gypsum Association's GA-214-2022 quick reference guide. The prices are US starting ranges for planning, so local quotes should replace them in a drywall cost calculator total.

Level 4 is the usual paint-ready finish, but GA-214 does not recommend it under non-flat or deep-tone paint. Eggshell, satin or dark walls belong at Level 5, which adds $175 at the midpoint on 1,000 sq ft in these ranges.

A drywall finishing cost calculator figure for a garage can drop to Level 2. On 1,000 sq ft that saves $500 at the midpoint against Level 4, since the board only needs a thin coat over the tape and fasteners.

Per-Sheet Prices: Bare Board vs Hung and Finished

A bare 4 x 8 sheet runs about $12.80 at $0.40 per sq ft of board, while the same sheet hung and finished to Level 4 costs $54.40 to $102.40. The midpoint is $78.40 per sheet installed.

LevelInstalled per 4 x 8 sheetMidpoint per sheetBare board share of midpoint
0$27.20 to $60.80$44.0029%
1$36.80 to $68.80$52.8024%
2$41.60 to $83.20$62.4021%
3$48.00 to $88.00$68.0019%
4$54.40 to $102.40$78.4016%
5$56.00 to $112.00$84.0015%

A drywall cost per sheet installed quote compares only with another per-sheet quote at the same finish level.

In a drywall cost calculator split, the bare board falls from 29% of the per-sheet midpoint at Level 0 to 15% at Level 5, as finishing labor takes over.

Shelf prices at stores such as Home Depot change by thickness and type. Moisture-resistant and 5/8 in Type X fire-rated panels cost more than standard 1/2 in board, so the sheet price belongs in a drywall price calculator total as a local figure.

Is 12-Foot Drywall Cheaper Than 8-Foot?

For 1,000 sq ft of board it is slightly cheaper, at 23 sheets for $442 against 35 sheets for $448. For one 12 by 12 room it costs more, because 12 sheets of 4 x 12 buy 576 sq ft of board against 544 sq ft for 17 sheets of 4 x 8.

Sheet sizePrice each12 x 12 room sheets12 x 12 room cost1,000 sq ft sheets1,000 sq ft cost
4 x 8 ft$12.8017$21835$448
4 x 9 ft$14.4016$23031$446
4 x 10 ft$16.0014$22428$448
4 x 12 ft$19.2012$23023$442

The board difference in a drywall cost calculator total is a few dollars either way, so the real saving is in taping. On a 12 ft wall, a 4 x 12 sheet hung sideways spans the wall with no butt joint, while 4 x 8 sheets leave one butt joint per row.

Butt joints are the hardest seams to hide, so fewer of them saves finishing time. Longer sheets need two people and a clear path into the room, which can rule them out for stair-access basements.

Mud, Tape and Screws per Sheet and per 1,000 sq ft

Each 1,000 sq ft of board takes about 9 gal of lightweight compound, 370 ft of paper tape and 2.7 lb of drywall screws. Per 4 x 8 sheet, that is 0.288 gal of compound, 11.84 ft of tape and 0.086 lb of screws.

The tape and screw rates come from the CGC Sheetrock installation and finishing guide (EJC371), which lists 370 ft of tape and 2.7 lb of Type W screws per 1,000 sq ft. It puts all-purpose compound at 10 gal.

USG puts lightweight compound at about two 4.5 gal pails per 1,000 sq ft in its product guidance. That works out to 0.9 gal per 100 sq ft of board for any drywall cost calculator mud estimate.

JobBoardCompound4.5 gal pailsTape250 ft rollsScrews
12 x 12 room492 sq ft4.43 gal1182 ft11.3 lb
1,000 sq ft1,000 sq ft9.00 gal2370 ft22.7 lb
1,200 sq ft home4,048 sq ft36.43 gal91,498 ft610.9 lb

These rates assume a three-coat Level 4 finish. A Level 5 skim coat uses more compound over the whole face, while Level 0 uses none, so the mud line in any drywall cost calculator materials total should follow the finish level.

Doing It Yourself: Materials Against Labor

Against a drywall cost calculator midpoint of $1,205, hanging and finishing the 12 by 12 room yourself costs about $587 in materials and saves $619. Labor is 51% of that midpoint at Level 4.

The $587 is 17 sheets at $12.80, or $218, plus $369 for mud, tape and screws at $0.75 per sq ft of board. On 1,000 sq ft, materials run $1,198 and the labor saved is $1,252.

Hanging alone is the easier half to DIY. At Level 0 the room needs only the 17 sheets at $218, and doing that part saves $459 of a $677 hung-only midpoint, with no mud or tape to buy.

Taping and coating are where a finisher's skill shows, so a drywall labor cost estimator figure for a pro to finish owner-hung board is worth getting before deciding.

Ceilings are the hard part of DIY drywall, since every sheet goes up overhead. Many owners rent a panel lift for the 144 sq ft ceiling in a 12 by 12 room, or hire out the ceiling and hang only the 348 sq ft of walls.

Tall Ceilings, Old Drywall and Add-Ons

A 12 by 12 room with 9 ft walls takes 540 sq ft and 19 sheets, and with 10 ft walls 588 sq ft and 21 sheets.

Installers price ceilings over 8 ft near the high end, so a drywall cost calculator high figure of $1,882 fits a 10 ft room better than the $1,441 midpoint.

Wall heightNet drywall4 x 8 sheetsLevel 4 midpointLevel 4 high
8 ft492 sq ft17$1,205$1,574
9 ft540 sq ft19$1,323$1,728
10 ft588 sq ft21$1,441$1,882

Replacing old board adds a removal line to the drywall cost calculator total, priced on the same net area. A $0.50 per sq ft tear-out quote adds $246 to the 12 by 12 room, and $1.00 adds $492, lifting the midpoint to $1,451 or $1,697.

A drywall replacement cost calculator total also needs delivery, texture and debris haul as flat add-ons. Those items do not scale with area on a small job, so they weigh heavily on a single room.

Paint follows the board, and the Paint Calculator sizes primer and finish coats from the same wall and ceiling area.

Outside the US: Metric Rooms and Local Prices

In metric, the drywall cost calculator Level 4 range of $1.70 to $3.20 per sq ft equals $18.30 to $34.44 per m², and supplies at $0.75 per sq ft equal $8.07 per m². The 12 by 12 ft room is 45.7 m² of net board.

South Africa, Australia, the UK and Ireland mostly sell metric sheets. A 1200 by 2400 mm panel covers 2.88 m², or 31.0 sq ft, about 3% less than a 4 by 8 ft sheet, so the 12 by 12 ft room needs 18 instead of 17.

Metric sheetArea eachSheets for 45.7 m² netBoard boughtSheet cost
1200 x 2400 mm2.88 m²1851.8 m²$223
1200 x 2700 mm3.24 m²1651.8 m²$223
1200 x 3000 mm3.60 m²1450.4 m²$217

Sheet costs use the same $0.40 per sq ft of board, or $4.31 per m², with 10% waste. The 3000 mm sheet buys the least board here, and it spans a 3 m wall without a butt joint.

For a drywall cost calculator in Canada, South Africa or Australia, the US starting prices do not carry over by exchange rate alone. A local installed price per m² replaces them, and the area, sheet and supplies math stays the same in any currency.

Answers on Drywall Jobs by Size and Place

Every drywall cost calculator figure below uses 4 x 8 sheets, 10% waste and the Level 4 range unless the answer names another level or sheet size.

How much does 1000 sq ft of drywall cost?

Hung and finished to Level 4, 1,000 sq ft of drywall costs $1,700 to $3,200, with a $2,450 midpoint. That area takes 35 sheets of 4 x 8 board, 9 gal of compound and 370 ft of tape.

Done as a DIY job, the same 1,000 sq ft costs about $1,198 in sheets and supplies as a drywall cost calculator materials-only total. The drywall cost per square foot then falls to about $1.20 against $2.45 installed.

How much to drywall a 1200 sq ft home?

A 1,200 sq ft home split into eight 12 by 12.5 ft rooms, each with one door and one window, needs about 4,048 sq ft of drywall and 140 sheets. At Level 4 that is $6,882 to $12,954, with a $9,918 midpoint.

That is 3.37 sq ft of board per sq ft of floor. Open plans with fewer walls need less, and many small rooms need more, so measuring each room for a drywall cost calculator beats any whole-house rule.

How much does it cost to drywall a garage?

A 24 by 24 ft garage with 9 ft walls, a 16 by 7 ft overhead door and one entry door takes 1,307 sq ft of board on walls and ceiling. At a Level 2 garage finish, the drywall cost calculator range is $1,699 to $3,398, with a $2,549 midpoint.

The house wall and any ceiling under living space carry a fire rule. IRC Table R302.6 calls for at least 1/2 in gypsum board on the garage side, and 5/8 in Type X board on the ceiling when a habitable room sits above.

What is the cost of drywall per square foot in India?

A per sq ft quote in rupees works the same way, applied to net board area rather than floor area. At an example quote of ₹100 per sq ft, the 492 sq ft of board in a 12 by 12 ft room comes to ₹49,200.

Convert a per-m² quote by dividing it by 10.764 to get the per sq ft rate. A local quote is the only reliable price, since the US starting prices do not translate to Indian labor and material costs.

What's the difference between drywall and sheetrock?

Sheetrock is USG's brand name for gypsum board, and drywall is the generic term for the same product. Panels from USG, CertainTeed, National Gypsum and other makers are made to the ASTM C1396 gypsum board standard.

The brand matters less for cost than the panel type. Standard 1/2 in board, moisture-resistant board and 5/8 in Type X fire-rated board each carry a different sheet price, so the sheet price follows the panel the job needs.