Tile installation cost calculator for a floor, wall or known area that counts tiles with the grout joint, rounds up to full boxes and prices thinset, grout, labor and tile removal.
Enter the floor size and your tile. Tiles are counted with the grout joint, then rounded up to whole boxes.
Installer Labor, Tile Removal and Backer Board
Rates load as typical US installer prices per square foot of tile laid. Swap in your local quotes.
Thinset, Grout and Joint Size
Thinset coverage loads from the bag chart for each trowel notch. Grout is worked out from tile size, joint width and joint depth.
Tile Layout With Your Numbers
Bid Line by Line and Tiles by Size
| Item | Amount | Low | High |
|---|---|---|---|
| Tile | 72 tiles, 9 boxes | $936 | $936 |
| Thinset | 2 bags | $40 | $40 |
| Grout | 5.9 lb, 1 bag | $25 | $25 |
| Installer Labor | 120 sq ft | $600 | $1,680 |
| Total Bid | $13.34 - $22.34/sq ft | $1,601 | $2,681 |
| Tile Size | Face Area | Tiles for 120 sq ft | Grout per 100 sq ft |
|---|---|---|---|
| 4 × 4 in | 0.11 sq ft | 1,118 | 19.5 lb |
| 3 × 6 in | 0.13 sq ft | 994 | 19.5 lb |
| 12 × 12 in | 1 sq ft | 130 | 6.5 lb |
| 12 × 24 in | 2 sq ft | 65 | 4.9 lb |
| 24 × 24 in | 4 sq ft | 33 | 3.3 lb |
| 24 × 48 in | 8 sq ft | 17 | 2.4 lb |
| 6 × 36 in | 1.5 sq ft | 86 | 7.6 lb |
Step-by-Step Tile Cost Math
Where the Money Goes in a Tile Installation Cost Calculator Bid
A 12 by 10 ft floor in 12 x 24 in porcelain at $6.50 per sq ft costs $1,601 to $2,681 installed, a $2,141 midpoint or $17.84 per sq ft. Materials hold at $1,001, and labor at $5 to $14 per sq ft makes up the rest.
| Bid line | Amount | Low | High |
|---|---|---|---|
| Tile | 72 tiles, 9 boxes | $936 | $936 |
| Thinset | 2 bags of 50 lb | $40 | $40 |
| Grout | 5.9 lb, 1 bag of 25 lb | $25 | $25 |
| Installer labor | 120 sq ft | $600 | $1,680 |
| Total bid | $13.34 to $22.34 per sq ft | $1,601 | $2,681 |
Labor is 53% of the midpoint, so the installer's rate moves a tile installation cost calculator total more than the tile does. Dropping to $3.50 tile saves $432, while the labor spread alone is $1,080.
Laying the floor yourself saves the $1,140 labor midpoint, but all 9 boxes and 3 bags still get bought. Spread over the job, the midpoint works out to $35.68 for each of the 60 tiles laid, or $237.89 per box bought.
Labor Rates per sq ft and What Installers Charge
Installers charge about $5 to $14 per sq ft to set floor tile and $8 to $20 across all tile work. HomeGuide's tile installation cost guide gives the $8 to $20 average and $10 to $50 installed.
The tile installation cost per square foot climbs fast with the labor rate, because materials stay fixed. These totals are the same 120 sq ft floor and $1,001 of materials at five labor rates.
| Labor rate | Labor for 120 sq ft | Installed total | Installed per sq ft |
|---|---|---|---|
| $5 per sq ft | $600 | $1,601 | $13.34 |
| $8 per sq ft | $960 | $1,961 | $16.34 |
| $10 per sq ft | $1,200 | $2,201 | $18.34 |
| $14 per sq ft | $1,680 | $2,681 | $22.34 |
| $20 per sq ft | $2,400 | $3,401 | $28.34 |
A labor rate covers layout, cutting, setting and grouting. Removal, backer board and leveling are separate lines, so a tile installation cost calculator figure that looks cheap per sq ft may simply leave the prep out.
Room Costs From a 5 x 8 Bath to 15 x 20
A 10 x 10 floor in 12 x 24 in tile costs $1,293 to $2,193, and a 12 x 12 room costs $1,845 to $3,141. Each row uses $6.50 tile, 10% waste, 8 tiles per box and $5 to $14 labor.
| Room | Area | Tiles | Boxes | Materials | Installed range | Midpoint per sq ft |
|---|---|---|---|---|---|---|
| 5 x 8 ft bath | 40 sq ft | 22 | 3 | $357 | $557 to $917 | $18.43 |
| 10 x 10 ft | 100 sq ft | 55 | 7 | $793 | $1,293 to $2,193 | $17.43 |
| 12 x 10 ft | 120 sq ft | 65 | 9 | $1,001 | $1,601 to $2,681 | $17.84 |
| 12 x 12 ft | 144 sq ft | 78 | 10 | $1,125 | $1,845 to $3,141 | $17.31 |
| 12 x 15 ft | 180 sq ft | 98 | 13 | $1,437 | $2,337 to $3,957 | $17.48 |
| 15 x 20 ft | 300 sq ft | 163 | 21 | $2,309 | $3,809 to $6,509 | $17.20 |
The per sq ft price does not fall in a straight line. The 12 x 10 room costs more per sq ft than the 10 x 10 because its 65 tiles fill 9 boxes, leaving 7 spares paid for and never laid.
Box size is the input most often missed in a tile installation cost calculator estimate for a small room, since one extra box of 12 x 24 tile adds $104 at $6.50 per sq ft.
Small bathrooms also run into minimum charges that sit outside any tile installation cost calculator rate per sq ft. HomeGuide notes such fees on small jobs, so a $557 bath floor may be quoted higher.
Whole-Home Totals for 500 to 2,000 sq ft
On tile installation cost calculator math with $6.50 tile, tiling 1,000 sq ft costs $12,462 to $21,462 at $5 to $14 labor, a $16,962 midpoint. At the same rates, 1,100 sq ft runs $13,755 to $23,655 and 1,200 sq ft runs $15,003 to $25,803.
| Area | 12 x 24 tiles | Boxes of 8 | Thinset bags | Grout bags | Installed range | Midpoint |
|---|---|---|---|---|---|---|
| 500 sq ft | 271 | 34 | 9 | 1 | $6,241 to $10,741 | $8,491 |
| 1,000 sq ft | 542 | 68 | 17 | 2 | $12,462 to $21,462 | $16,962 |
| 1,100 sq ft | 596 | 75 | 19 | 3 | $13,755 to $23,655 | $18,705 |
| 1,200 sq ft | 650 | 82 | 20 | 3 | $15,003 to $25,803 | $20,403 |
| 1,500 sq ft | 813 | 102 | 25 | 3 | $18,683 to $32,183 | $25,433 |
| 2,000 sq ft | 1,084 | 136 | 34 | 4 | $24,924 to $42,924 | $33,924 |
Large floors settle near $17 per sq ft at these rates because box and bag rounding stops mattering. Any floor tile installation cost calculator total for a whole home is mostly labor times area.
Tile Counts With the Grout Joint Included
A 100 sq ft floor takes 108 tiles of 12 x 12 in with 10% waste and a 1/8 in joint, or 98 with no waste. A tile installation cost calculator count that skips the joint says 110, but the joint makes each tile cover 1.0209 sq ft.
N is the tile count, A the area in sq ft and w the waste in percent. W and L are the tile width and length and j the joint width, all in inches, and 144 turns square inches into square feet.
| Tile size | 100 sq ft | 200 sq ft | 1,000 sq ft | 1,200 sq ft | 2,000 sq ft |
|---|---|---|---|---|---|
| 4 x 4 in | 931 | 1,862 | 9,310 | 11,171 | 18,619 |
| 3 x 6 in | 828 | 1,656 | 8,276 | 9,931 | 16,552 |
| 12 x 12 in | 108 | 216 | 1,078 | 1,293 | 2,155 |
| 12 x 24 in | 55 | 109 | 542 | 650 | 1,084 |
| 24 x 24 in | 28 | 55 | 273 | 327 | 545 |
| 24 x 48 in | 14 | 28 | 137 | 164 | 273 |
The joint matters most on small tile. A 4 x 4 in tile with its 1/8 in joint covers 6.3% more than its face, so 100 sq ft takes 931 tiles instead of the 990 a face-area count gives.
Waste is the bigger lever on large tile. The 10% allowance suits straight lay. Diagonal and herringbone layouts cut more tiles, so raise the waste before pricing them.
Boxes, Not sq ft, Set the Tile Bill
The 120 sq ft floor needs 65 tiles, but 8 tiles per box means buying 9 boxes and 72 tiles. The tile line is $936, not the $845 that 65 tiles would cost, and 7 tiles stay spare for repairs.
Box rounding adds $91 to this tile installation cost calculator total. On a 40 sq ft bath, 22 tiles fill 3 boxes, so 2 spares are bought.
Box coverage is tile face area times tiles per box. Four 600 x 600 mm tiles cover 15.5 sq ft, or 1.44 m², so 1,000 sq ft with 10% waste and 3 mm joints takes 71 boxes.
One Indian tile maker's guide quotes 285 to 300 boxes for that same 1,000 sq ft. That count only works if a box covered 3.88 sq ft, which mixes up the 1.44 m² per box with square feet.
Thinset Bags by Trowel Notch
A 50 lb bag of thinset covers 85 to 95 sq ft with a 1/4 x 1/4 in square notch and 60 to 67 sq ft with a 1/4 x 3/8 in notch, per the Custom Building Products PremiumPlus coverage chart.
| Area | 1/4 x 1/4 in notch, 85 sq ft per bag | 1/4 x 3/8 in notch, 60 sq ft per bag | 1/2 x 1/2 in notch, 40 sq ft per bag |
|---|---|---|---|
| 100 sq ft | 2 bags | 2 bags | 3 bags |
| 500 sq ft | 6 bags | 9 bags | 13 bags |
| 1,000 sq ft | 12 bags | 17 bags | 25 bags |
Thinset is $40 of the $2,141 tile installation cost calculator midpoint for 120 sq ft, but running short stops the job.
Using the low end of each chart range keeps a spare bag on hand. The 1/2 in column uses 40 sq ft, the low end of the 40 to 50 sq ft that the ProFlex mortar catalog lists for a 1/2 in square notch.
Bag coverage is only an estimate. ANSI A108.5 calls for at least 80% mortar contact in dry areas and 95% in wet areas and exteriors, so lift a set tile and check.
Grout Weight by Tile Size and Joint Width
Grout for 100 sq ft of 12 x 24 in tile, 3/8 in thick with 1/8 in joints, weighs 4.9 lb. The same area of 4 x 4 in tile takes 19.5 lb, because small tiles put far more joint into each square foot.
G is grout in lb per sq ft, W and L the tile sides, j the joint width and t the tile thickness in inches. The 0.0578 lb per cubic inch equals 1.6 kg per liter, the factor listed for MAPEI Ultracolor on Tilers Forums.
| Tile size | 1/16 in joint | 1/8 in joint | 3/16 in joint |
|---|---|---|---|
| 4 x 4 in | 9.8 lb | 19.5 lb | 29.3 lb |
| 3 x 6 in | 9.8 lb | 19.5 lb | 29.3 lb |
| 6 x 36 in | 3.8 lb | 7.6 lb | 11.4 lb |
| 12 x 12 in | 3.3 lb | 6.5 lb | 9.8 lb |
| 12 x 24 in | 2.4 lb | 4.9 lb | 7.3 lb |
| 24 x 24 in | 1.6 lb | 3.3 lb | 4.9 lb |
| 24 x 48 in | 1.2 lb | 2.4 lb | 3.7 lb |
Figures are per 100 sq ft at 3/8 in tile thickness, and grout stays the smallest line of any tile installation cost calculator bid.
Joint width is set by the tile, not by taste. Under ANSI A108.02 section 4.3.8, a joint must be at least three times the tile's size variation.
In running bond with any side over 15 in, the same section sets a 1/8 in minimum for rectified tile and 3/16 in for calibrated tile. No joint should be narrower than 1/16 in.
Backsplash and Wall Tile Prices
A 30 sq ft backsplash in 3 x 6 in subway tile at $6.50 per sq ft costs $513 to $873 with $8 to $20 labor, a $693 midpoint or $23.08 per sq ft. It takes 256 tiles, 7 boxes of 40 and 2.4 lb of grout.
Wall labor runs $5 to $20 per sq ft for backsplashes, per HomeGuide's backsplash cost guide, with minimum charges for small areas. At a $20 to $35 rate the same wall costs $873 to $1,323.
Wall tile costs more per sq ft than floor tile because the area is small and the cuts are many. A wall tile installation cost calculator estimate for 30 sq ft carries 24 spare tiles, a full grout bag and a full thinset bag.
Removing an old backsplash adds $2 to $5 per sq ft, or $60 to $150 for 30 sq ft, per the same HomeGuide guide. Damaged drywall behind it is a separate repair that a tile installation cost calculator estimate for the tile alone leaves out.
Old Tile Removal and Backer Board
Removing old tile at $2 to $7 per sq ft, the range on HomeGuide's tile cost guide, lifts the 120 sq ft floor to $1,841 to $3,521. Removal plus new cement backer board takes it to $2,441 to $4,481.
| Prep on 120 sq ft | Prep rate | Installed range | Midpoint per sq ft |
|---|---|---|---|
| Surface ready | None | $1,601 to $2,681 | $17.84 |
| Remove old tile | $2 to $7 | $1,841 to $3,521 | $22.34 |
| Add backer board | $5 to $8 | $2,201 to $3,641 | $24.34 |
| Remove and add backer | $7 to $15 | $2,441 to $4,481 | $28.84 |
Full prep raises the midpoint by 62% on the same tile, which is why two tile installation cost calculator quotes for one room can differ so much. The $5 to $8 backer board rate is the installed sheet price that HomeServe's tile cost guide quotes.
A bathroom tile installation cost calculator estimate on a tear-out job should carry both lines. A 10 x 10 bathroom floor with removal and backer runs $1,993 to $3,693 at the same tile and labor.
Uneven floors may also need leveling before tile. The Self Leveling Coverage Calculator sizes that pour, and the Subfloor Calculator covers a new subfloor.
India Rates in Rupees for a 12 x 12 Room
A 12 x 12 ft room in 600 x 600 mm vitrified tile at ₹60 per sq ft costs ₹15,270 to ₹17,430 with labour at ₹20 to ₹35 per sq ft. That is a ₹16,350 midpoint, or about ₹114 per sq ft.
Labour and adhesive come from Orientbell's tile price guide, which lists ₹20 to ₹35 laying and a 20 kg adhesive bag covering 45 to 50 sq ft. A ₹540 bag at 45 sq ft matches its ₹12 per sq ft example.
A tile installation cost calculator estimate in rupees needs Indian rates, since US dollar labor converted at the exchange rate lands far above the ₹20 to ₹35 laying charge.
| Area | 600 x 600 tiles | Boxes of 4 | Tile cost | Adhesive bags | Installed range | Midpoint per sq ft |
|---|---|---|---|---|---|---|
| 10 x 10 ft | 29 | 8 | ₹7,440 | 3 | ₹11,060 to ₹12,560 | ₹118.10 |
| 12 x 12 ft | 41 | 11 | ₹10,230 | 4 | ₹15,270 to ₹17,430 | ₹113.54 |
| 1,000 sq ft | 282 | 71 | ₹66,030 | 23 | ₹98,450 to ₹113,450 | ₹105.95 |
Rows use 3 mm joints, 10% waste and 9 mm tile. Grout is left out at about 1.9 kg for the 12 x 12 room. GST adds 18% on tiles above ₹1,000 per m² and 5% below, per the same guide.
A tiles cost calculator India estimate shifts most with the tile grade. The same 12 x 12 room in ₹90 tile runs ₹20,385 to ₹22,545, while ₹30 to ₹50 metro labour on ₹60 tile gives ₹16,710 to ₹19,590.
Price Checks per Box, Room and Tile
Each answer below uses 10% waste, 1/8 in joints and $6.50 tile unless it names other figures, so the counts line up with the tables above.
How much to charge per sq ft to install tile?
Charge $5 to $14 per sq ft for straight-lay floor tile and $8 to $20 for walls, small formats and patterns. Prep is extra. On the 120 sq ft floor, $10 per sq ft labor gives an $18.34 installed rate.
Those rates are only the labor line of a tile installation cost calculator estimate. Materials on that floor add $8.34 per sq ft, so the installed price sits well above the labor rate quoted.
Some installers bill by the hour instead. HomeGuide puts backsplash labor at $30 to $100 per hour, a basis that suits small jobs where a per sq ft rate would fall under the minimum charge.
How to calculate tiles labour cost?
Multiply the area tiled by the labor rate. A 120 sq ft floor at $5 to $14 per sq ft is $600 to $1,680 of labor. A 144 sq ft room in India at ₹20 to ₹35 is ₹2,880 to ₹5,040 of labour.
Split the labor midpoint by the tile count to see the price per piece. The 120 sq ft floor's $1,140 midpoint over the 60 tiles laid is $19.00 of labor per tile.
How much does it cost to install 1000 sq ft of tile?
Installing 1,000 sq ft of 24 x 24 in tile at $6.50 per sq ft costs $12,566 to $21,566, a $17,066 midpoint.
That is 273 tiles in 69 boxes of 4, 17 bags of thinset and 2 bags of grout. That tile installation cost calculator midpoint is $17.07 per sq ft, inside HomeGuide's $10 to $50 installed range.
How many 12x12 tiles for 100 sq ft?
You need 108 tiles of 12 x 12 in for 100 sq ft with 10% waste and 1/8 in joints. In boxes of 10 that is 11 boxes, so 110 tiles arrive and 2 are spare.
How many tiles are needed for a 10x10 room?
A 10 x 10 room needs 108 tiles of 12 x 12 in or 28 tiles of 24 x 24 in, both with 10% waste. Without waste the 12 x 12 count is 98, since the joint adds coverage to every tile.
How many tiles are required for 1200 square feet?
For 1,200 sq ft, plan on 1,293 tiles of 12 x 12 in, 650 of 12 x 24 in or 327 of 24 x 24 in. A 2,000 sq ft house floor takes 545 of the 24 x 24 in tiles in 137 boxes of 4.
How much does it cost to tile a 10x10 bathroom?
A 10 x 10 bathroom floor costs $1,293 to $2,193 on a ready subfloor with $6.50 tile. Tearing out old tile and adding backer board raises it to $1,993 to $3,693, or $28.43 per sq ft, in a bathroom tile installation cost calculator estimate.
How much does it cost to tile a 12x12 room in India?
Tiling a 12 x 12 room in India costs ₹15,270 to ₹22,545 with tile at ₹60 to ₹90 per sq ft and labour at ₹20 to ₹35. In 600 x 1200 mm tile at ₹60, the room takes 21 tiles in 11 boxes of 2 at the same total.
How much is 1 sq ft of tile?
Tile material runs $2 to $30 per sq ft in the US, per HomeGuide, and ₹25 to ₹180 in India, per Orientbell.
Ceramic is the cheaper body and vitrified or porcelain the dearer, with stone and glass highest. Tile grade swings a tile installation cost calculator total less than labor does.
Installed, HomeGuide lists ceramic at $12 to $40 per sq ft and porcelain at $15 to $50. Orientbell lists ceramic floor tile at ₹25 to ₹45 and double-charge vitrified at ₹55 to ₹90 per sq ft.
How much is 1 box of tiles?
A box of four 600 x 600 mm vitrified tiles costs about ₹720 to ₹1,350, per Orientbell, which is ₹46.50 to ₹87.10 per sq ft over its 15.5 sq ft.
A 2-tile box of 800 x 1600 mm slabs runs ₹2,048 to ₹3,584 and covers 27.56 sq ft. Divide any box price by its sq ft to compare it with a per-sq-ft quote.
Which tile is better, 2x2 or 2x4?
A 2 x 4 ft tile uses half the pieces and 25% less grout than 2 x 2 ft. Over 1,000 sq ft that is 137 tiles and 24.4 lb of grout, against 273 tiles and 32.5 lb.
The bigger tile needs a flatter floor and a larger notch. At 40 sq ft per bag the 2 x 4 floor takes 25 bags of thinset instead of 17, and long rectified sides need at least a 1/8 in joint in running bond.
At the same $6.50 per sq ft, the two sizes land within $25 of each other in a tile installation cost calculator total for 1,000 sq ft. With the larger notch, the 2 x 4 floor costs $135 more.
Tile counts on their own are on the Tile Calculator, and the Tile Mortar Calculator sizes the setting bed. Shower floors start with the Shower Pan Slope Calculator.