Tile Grout Calculator

Updated

Tile Grout Calculator for the cement or epoxy grout a floor or wall needs from tile size, joint width and depth, with the whole bags to buy, coverage per sq ft or m², and its cost.

Tile Grout Area, Tile Size & Joints

Joint depth is usually the tile thickness; use the spacer size for joint width.

ft
ft
in
in
in
in
sq ft
Grout Type, Package, Waste & PriceCement powder, 10 lb, 10% extra
lb
%
$
lb/ft³
6 in × 3 in Tile, 1/8 in Joints, 50 sq ft
6.23 lb of Grout Powder
Includes 10% extra for mixing and wash-off, on top of what the joints hold
1 × 10 lb Bag
Left Over After the Job3.77 lb
Coverage per Bag80.2 sq ft
Round up to whole bags; any spare goes toward repairs, so buy the same color lot for the whole floor or wall.
0.1133 lb per Sq Ft
Joint Volume per Sq Ft2.68 cu in
Joint Share of Surface5.96%
Grout use before waste. Smaller tiles, wider joints and thicker tiles all raise it, since there is more joint to fill per square foot.
134.1 cu in of Joint Volume
Total Grout Line Length290.0 ft
Grout per Tile0.24 oz
Joint length helps plan sealer and caulk; grout per tile shows how little each tile takes, about 376 tiles in all.
$16.00 Grout Cost
Cost per Sq Ft$0.320
Cost of Grout Used$9.97
Whole bags at $16.00 each set what you pay; the grout the job actually uses is priced beside it, so you can see what the spare costs.
Tile & Joint Diagram1/8 in joints
1/8 in wide5/16 in deepjoint section6 in × 3 in tiles (not to scale for large tiles)
Grout Needed by Tile Size1/8 in joint
Tile SizeThicknesslb per Sq FtTotal for AreaBags
1 × 1 in mosaic1/4 in0.319217.6 lb2
2 × 2 in mosaic1/4 in0.17379.55 lb1
3 × 6 in subway5/16 in0.11336.23 lb1
4 × 12 in wall5/16 in0.07664.21 lb1
12 × 12 in floor3/8 in0.04682.57 lb1
6 × 24 in plank3/8 in0.05813.20 lb1
12 × 24 in floor3/8 in0.03521.94 lb1
24 × 24 in floor3/8 in0.02361.30 lb1
6 in × 3 in (yours)5/16 in0.11336.23 lb1
Grout Needed by Joint Width6 in × 3 in tile
Joint Widthlb per Sq FtTotal for AreaCoverage per BagGrout Kind
1/16 in0.05803.19 lb156.8 sq ftUnsanded
1/8 in0.11336.23 lb80.2 sq ftSanded
3/16 in0.16609.13 lb54.7 sq ftSanded
1/4 in0.216411.9 lb42.0 sq ftSanded
3/8 in0.310617.1 lb29.3 sq ftSanded
Step-by-Step Grout Math5 steps
Area10 ft × 5 ft = 50 sq ft
Joint share1 - (L × W) ÷ ((L + J) × (W + J)) = 1 - (6 × 3) ÷ ((6 + 0.125) × (3 + 0.125)) = 0.05959
Rate0.05959 × 0.3125 in ÷ 12 × 73 lb/ft³ = 0.11329 lb/sq ft
Grout needed0.11329 lb/sq ft × 50 sq ft = 5.66 lb; + 10% = 6.23 lb
Bags⌈6.23 lb ÷ 10 lb⌉ = 1 × $16.00 = $16.00
Buy 1 × 10 lb Bag of Sanded Grout
Joints of 1/8 in and wider take sanded grout. Mix only what you can use in about 30 minutes, and keep the same color lot for the whole job.

Tile Grout Calculator Chart by Tile Size

A 100 sq ft floor of 12 × 12 in tile with 1/8 in joints needs about 5.2 lb of cement grout powder, including 10% extra. The same floor in 1 × 1 in mosaic needs 41.8 lb, eight times as much.

Mosaic joints cover 12 times more of the surface, and the thinner tile only partly offsets that in any tile grout calculator estimate.

Each row is a tile grout calculator result for 100 sq ft at 1/8 in joints, with joint depth equal to the tile thickness. Powder weight uses 73 lb of grout per cubic foot of joint, the yield behind MAPEI's own coverage chart.

Tile SizeThicknessJoint Share of Surfacelb per Sq Ftkg per m²Total for 100 Sq Ft10 lb Bags
1 × 1 in mosaic1/4 in25.0%0.38021.85641.8 lb5
2 × 2 in mosaic1/4 in12.5%0.19010.92820.9 lb3
3 × 6 in subway5/16 in6.25%0.11880.58013.1 lb2
4 × 12 in wall5/16 in4.17%0.07920.3878.7 lb1
12 × 12 in floor3/8 in2.08%0.04750.2325.2 lb1
6 × 24 in plank3/8 in2.60%0.05940.2906.5 lb1
12 × 24 in floor3/8 in1.56%0.03560.1743.9 lb1
24 × 24 in floor3/8 in1.04%0.02380.1162.6 lb1

The lb per sq ft and kg per m² columns are rates before the 10% extra. Totals include it, and the bag count rounds up to whole 10 lb bags in each tile grout calculator row.

Here w is grout in lb per sq ft, L and W are tile length and width in inches, J is the joint width and D the joint depth in inches, and ρ is 73 lb per cubic foot. The fraction (L + W) ÷ (L × W) × J is the share of the surface that is joint.

That tile grout calculation formula matches the manufacturer method. MAPEI's Keracolor U data sheet lists 212 sq ft per 10 lb bag for 12 × 12 × 3/8 in tile at 1/8 in, and the formula gives 210.4 sq ft.

The same check holds across MAPEI's chart, which makes it a fair test for any tile grout calculator.

For 1 × 1 × 1/4 in mosaic at 1/16 in, MAPEI lists 52 sq ft and the formula gives 52.6 sq ft; for 24 × 24 × 1/2 in tile at 1/8 in, MAPEI lists 318 sq ft and the formula gives 315.6 sq ft.

The Tile Calculator counts the tiles and boxes for the same area. Grout and tile share one input that matters most, the tile size, since small tiles drive both counts up.

Joint Width and Grout Bag Count

Grout use rises in direct proportion to joint width, the input that moves a tile grout calculator for floor or wall the most.

On 100 sq ft of 12 × 12 × 3/8 in tile, 1/16 in joints take 2.6 lb, 1/8 in take 5.2 lb and 1/4 in take 10.5 lb, so the wider joint needs two 10 lb bags instead of one.

Joint Widthlb per Sq FtTotal for 100 Sq FtCoverage per 10 lb BagGrout Kind
1/16 in0.02382.6 lb382.6 sq ftUnsanded
1/8 in0.04755.2 lb191.3 sq ftSanded
3/16 in0.07137.8 lb127.5 sq ftSanded
1/4 in0.095110.5 lb95.6 sq ftSanded
3/8 in0.142615.7 lb63.8 sq ftSanded

Coverage per bag in this tile grout calculator chart already allows 10% for mixing and wash-off on top of the joint fill.

Joints under 1/8 in take unsanded grout, which MAPEI rates for 1/16 to 1/8 in joints, while 1/8 in and wider take sanded grout so the joint does not shrink and crack.

Tile thickness works the same way as width, because joint depth equals the tile thickness. A 24 × 24 in tile at 1/2 in thick takes a third more grout per square foot than the same tile at 3/8 in.

Check the real thickness on the box before a tile grout calculator order for large-format tile, since slabs run from 3/8 in to 1/2 in and more.

Grout line length is a separate number from weight. A 50 sq ft wall of 3 × 6 in subway tile has about 290 ft of joints, the length that sealer and the Sealant Calculator work from at corners and changes of plane.

Grout Coverage per kg in Metric Tiles

One kilogram of cement grout covers about 9.5 m² of 600 × 600 × 9 mm tile with 3 mm joints, but only 2.38 m² of 100 × 100 × 6 mm tile. Tile grout coverage per kg depends almost entirely on tile size and joint width, not on the brand.

Tile (mm)Thickness2 mm Joint3 mm Joint5 mm Jointm² per kg at 3 mm
100 × 1006 mm0.281 kg/m²0.421 kg/m²0.702 kg/m²2.38
200 × 2008 mm0.187 kg/m²0.281 kg/m²0.468 kg/m²3.56
120 × 2408 mm0.234 kg/m²0.351 kg/m²0.585 kg/m²2.85
300 × 3008 mm0.125 kg/m²0.187 kg/m²0.312 kg/m²5.34
300 × 6009 mm0.105 kg/m²0.158 kg/m²0.263 kg/m²6.33
600 × 6009 mm0.070 kg/m²0.105 kg/m²0.175 kg/m²9.50
600 × 12009 mm0.053 kg/m²0.079 kg/m²0.132 kg/m²12.67

Values are tile grout calculator results before waste and use 1.17 kg of powder per litre of joint, the metric form of 73 lb per cubic foot. Add the waste allowance on top, then divide by the bag size in kg.

A common rule of thumb puts grout at 0.2 to 0.5 kg per m², and many people use it instead of a tile grout calculator.

That rule fits 200 to 300 mm tile, but 600 × 1200 mm tile at 2 mm needs only 0.053 kg/m², and a 1 × 1 in mosaic at 1/8 in needs 1.86 kg/m², nearly four times the rule's upper end.

For any tile grout calculator in the UK, India or the Philippines, where tile sizes are quoted in mm, convert joint and thickness in mm too. A 3 mm joint is close to 1/8 in, and a 2 mm joint sits between 1/16 and 1/8 in.

Epoxy vs Cement Grout Quantity

Epoxy grout weighs more per litre than cement grout powder, so the same joints need about 52% more by weight. A 50 sq ft wall of 3 × 6 in subway tile at 1/8 in takes 6.5 lb of cement grout and 9.9 lb of epoxy.

JobCement GroutEpoxy Grout
50 sq ft, 3 × 6 in subway, 1/8 in6.53 lb9.92 lb
40 sq ft, 12 × 24 in floor, 1/8 in1.57 lb2.38 lb
40 sq ft, 2 × 2 in mosaic, 1/8 in8.36 lb12.70 lb
100 sq ft, 4 × 12 in wall, 1/8 in8.71 lb13.23 lb
200 sq ft, 12 × 12 in floor, 3/16 in15.68 lb23.82 lb

Both columns include 10% extra for waste. Epoxy uses 110.87 lb per cubic foot of joint, or 1.78 kg per litre, against 73 lb for cement powder, and in metric 600 × 600 × 9 mm tile at 3 mm takes 0.160 kg/m² of epoxy.

An epoxy grout calculation formula is the same joint-volume formula with the epoxy density in place of 73. Epoxy kits are sold by weight, so divide the total by the kit size and round up, since a partial kit cannot be split once mixed.

Epoxy grout coverage per kg varies by brand more than cement grout does, because fillers and resin ratios differ. Check the yield on the kit's data sheet and use that figure as a custom density when it differs from 1.78 kg per litre.

Bathroom, Shower and Backsplash Jobs

A 5 × 8 ft bathroom floor in 12 × 24 in tile needs only 1.6 lb of grout at 1/8 in joints, but the same floor in 2 × 2 in mosaic needs 8.4 lb. Both fit in one 10 lb bag, so tile choice changes the work more than the purchase.

JobTilesGrout Line LengthCement Grout10 lb Bags
50 sq ft backsplash, 3 × 6 in, 1/16 in388294.9 ft3.27 lb1
5 × 8 ft bath floor, 12 × 24 in, 1/8 in2059.5 ft1.57 lb1
5 × 8 ft bath floor, 2 × 2 in mosaic, 1/8 in1,276451.8 ft8.36 lb1
100 sq ft shower walls, 4 × 12 in, 1/8 in288389.9 ft8.71 lb1
200 sq ft kitchen floor, 12 × 12 in, 3/16 in194393.8 ft15.68 lb2
400 sq ft floor, 24 × 24 in, 1/8 in99397.9 ft10.46 lb2

Grout line length sets the labor, and the tile grout calculator weight sets what to buy. The 2 × 2 in mosaic floor has 7.6 times the joint length of the 12 × 24 in floor, so it takes far longer to grout and clean even though one bag covers both.

A 400 sq ft floor of 24 × 24 in tile needs 10.46 lb, just over one 10 lb bag, so it takes two. A 25 lb bag covers it with 14.5 lb to spare, and one bag from one color lot keeps the shade even.

For a tile grout calculator for bathroom jobs, size shower walls by the wall tile and the floor by the floor tile.

Add the floor and walls as separate areas when they use different tiles, since 2 × 2 in floor mosaic uses 2.4 times the grout per square foot of 4 × 12 in wall tile.

Thinset under the tile is a separate quantity from any tile grout calculator total. The Adhesive Coverage Calculator sizes the setting bed, and the Deck Mud Calculator covers a sloped shower pan below the tile.

Calculating, Sizing and Choosing Grout

Every answer below uses the tile grout calculator basis of cement grout at 73 lb per cubic foot of joint and joint depth equal to tile thickness. Swap in epoxy at 1.78 kg per litre for epoxy jobs.

How do you calculate grout?

Multiply the joint share of the surface by the joint depth and the grout density, then by the area, the same steps as a tile grout calculator. For 3 × 6 in tile at 1/8 in, the joint share is (3 + 6) ÷ 18 × 0.125 = 0.0625, or 6.25% of the surface.

Multiply that share by the 0.3125 in depth over 12, then by 73 lb per cubic foot, for 0.1188 lb per sq ft. A 50 sq ft wall then needs 5.94 lb, and 10% extra brings it to 6.53 lb, one 10 lb bag with 3.47 lb to spare.

How much grout does a tile need?

A single 3 × 6 in subway tile at 1/8 in joints takes about 0.25 oz of grout, and a 12 × 24 cm tile at 3 mm joints and 8 mm thick takes about 10 g. Per square foot, 12 × 12 in tile at 1/8 in needs 0.0475 lb.

A 12 × 24 cm tile at 2 mm joints takes 6.7 g, and at 3 mm joints and 10 mm thick it takes 12.6 g, so joint width and thickness together nearly double the amount per tile.

For a 50 sq ft backsplash in 3 × 6 in tile, that adds up to 3.27 lb at 1/16 in or 6.53 lb at 1/8 in.

What size grout should I use?

Use unsanded grout for joints under 1/8 in and sanded grout for 1/8 in and wider. MAPEI rates its unsanded Keracolor U for 1/16 to 1/8 in joints, and the usual minimum joint is 1/16 in even for rectified tile.

Choose the grout line size from the tile edge first, since every tile grout calculator estimate starts from the joint width.

Rectified tile with straight, square edges can sit at 1/16 in, while pressed tile with rounded or uneven edges needs 1/8 to 3/16 in so the joint hides the size variation.

That choice moves the tile grout calculator order. Going from 1/16 to 3/16 in on 12 × 12 in floor tile triples the grout, from 2.6 lb to 7.8 lb per 100 sq ft, and many sanded grouts stop at 1/2 in, so check the joint range on the bag.