Backsplash Calculator

Updated

Backsplash calculator for the tiled area of a kitchen or bath wall with range, side wall and window, then tile count with joints, boxes, grout, thinset, trim and an installed cost.

Backsplash Size & Tile

Measure the counter run and the height from counter to the upper cabinets, usually 18 in.

in
in
in
in
%
Range, Window, Side Wall & OutletsRange, window, 3 outlets
in
in
in
in
in
Grout, Thinset, Boxes & Trim1/8 in joint, 1/4 × 1/4 in
in
in
sq ft
lb
in
in
Tile Price & Labor$8.50 per sq ft
$/sq ft
Backsplash Square Footage
29.50 sq ft Backsplash
4,248 sq in ÷ 144, window deducted, range area added, outlets not deducted
245 Tiles with 10% Waste
Boxes to Buy4 boxes, 320 tiles
Tiles per Sq Ft7.52 with joints
Tile count uses the tile plus one grout joint, so it runs a little under plain area math. Boxes round up to whole cartons.
3.3 lb Sanded Grout
Grout Bags to BuyOne bag, 6.7 lb spare
Joint Share of Wall5.96%
Grout fills the joint share of the wall to the tile depth. Joints of 1/8 in and wider take sanded grout, narrower take unsanded.
1 Bag of Thinset
Thinset Used17 lb
Spare Bag Coverage55.5 sq ft
Coverage is the low end of the maker chart for 50 lb bags at this notch. Mix only what you can tile before it skins over.
$945.00 Installed Cost
Materials$414.00
Installed per Sq Ft$32.03
Tile is priced by whole boxes, plus grout, thinset and trim. Labor is charged on the net tiled area of the backsplash wall.
Backsplash Wall Diagram29.50 sq ft tiled
216 in × 18 in, range 30 in to 30 in high, window deducted
Tiles Needed by Tile Size10 sizes
Tile SizeTiles per 100 sq ftTiles for This WallGrout
2 × 8 in8342714.1 lb
3 × 6 in7522453.3 lb
3 × 12 in3801242.8 lb
4 × 4 in8462753.3 lb
4 × 12 in288942.3 lb
6 × 6 in3841252.3 lb
4 × 16 in216712.1 lb
12 × 12 in98321.2 lb
12 × 24 in49160.9 lb
600 × 1,200 mm1760.1 lb
Areas, Trim, Outlets & Caulk20.0 ft caulk joint
ItemAmountNote
Main backsplash27.00 sq ft216 in × 18 in
Range wall extension2.50 sq ft30 in × 12 in
Side wall3.00 sq ft24 in × 18 in
Window- 3.00 sq ftdeducted, 1 sq ft or larger
Edge trim1 piece3.0 ft of exposed edge
Outlet box extenders3 extendersoutlets are not deducted
Caulk joint at counter20.0 ftflexible caulk, not grout
Step-by-Step Backsplash Math8 steps
Area(216 × 18 + 30 × 12 + 24 × 18 - 36 × 12) ÷ 144 = 29.5 sq ft
Tiles per sq ft144 ÷ ((3 + 0.125) × (6 + 0.125)) = 7.5233
Tiles⌈29.5 × 7.5233 × 1.1⌉ = 245
Boxes⌈245 ÷ 80 tiles per box⌉ = 4
Joint share1 - (3 × 6) ÷ ((3 + 0.125) × (6 + 0.125)) = 0.059592
Grout29.5 sq ft × 0.059592 × 0.3125 in ÷ 12 × 73 lb/cu ft = 3.34 lb
Thinset29.5 sq ft ÷ 85 sq ft per bag = 0.3471 → 1 bag
Cost4 × 10 sq ft × $8.50 + 1 × $22.00 + 1 × $28.00 + 1 × $24.00 + 29.5 sq ft × $18.00 = $945.00
Use Sanded Grout for the 1/8 in Joint
Joints 1/8 in and wider need sanded grout to resist shrinking and cracking. Choose unsanded only for glass or polished stone that sand can scratch.

Backsplash Calculator Results for Kitchen Walls

An 18 ft run of 18 in high backsplash with a 30 in range wall, a 24 in side wall and a 36 in window comes to 29.5 sq ft. In 3 × 6 in subway tile at 1/8 in joints, that is 245 tiles with 10% waste, or 4 boxes of 10 sq ft.

Each row below is a backsplash calculator result for a plain wall at 18 in high, with no range extension, window or side wall. Tile is 3 × 6 in subway at 1/8 in joints, 10% waste and boxes of 10 sq ft.

Counter RunAreaTiles With 10%BoxesSanded GroutInstalled Cost
8 ft (96 in)12.0 sq ft10021.4 lb$460
10 ft (120 in)15.0 sq ft12521.7 lb$514
15 ft (180 in)22.5 sq ft18732.6 lb$734
18 ft (216 in)27.0 sq ft22433.1 lb$815
20 ft (240 in)30.0 sq ft24943.4 lb$954
26 ft 8 in (320 in)40.0 sq ft33254.5 lb$1,219

Every backsplash calculator cost in the table is built from $8.50 per sq ft of tile bought in whole boxes, one $22 grout bag, one $28 thinset bag, one $24 trim piece and $18 per sq ft of labor.

The short runs cost more per square foot because a part box and the grout and thinset bags are bought whole, even when a wall uses a fraction of each.

Height drives the backsplash calculator area as much as length. A 10 ft run is 3.33 sq ft at a 4 in strip, 5 sq ft at 6 in, 15 sq ft at the standard 18 in up to the wall cabinets and 20 sq ft at 24 in.

The Countertop Calculator handles a stone splash cut from the counter slab. A full-height tiled wall from counter to ceiling is better measured with the Tile Calculator.

Range, Window and Outlet Rules

For a kitchen backsplash calculator total, add the range wall above the band, deduct a window of 1 sq ft or more, and never deduct outlets.

On the sample kitchen that is 27 sq ft of band, plus 2.5 sq ft behind the range and 3 sq ft of side wall, minus a 3 sq ft window.

A is the tiled area in sq ft, and every length is in inches, the form behind any backsplash calculator inches to sq ft step.

L and H are the run and backsplash height, Wr and Hr the range width and extra height up to the hood, Ls the side wall length, and Ww and Hw the window opening inside the backsplash band.

The range wall is the area left out of most backsplash calculator estimates. A 30 in range with tile 12 in above the cabinet line adds 2.5 sq ft, about 19 extra subway tiles, since the hood sits higher than the cabinets.

Windows under 1 sq ft stay in the backsplash calculator count. An 11 × 11 in opening is 0.84 sq ft, and the tiles around it still come out of full pieces, so deduction starts at 12 × 12 in.

Outlets are too small to matter. A standard single-gang plate is about 2 3/4 × 4 1/2 in, or 0.086 sq ft, so three outlets total 0.26 sq ft, under 1% of the 29.5 sq ft wall, and each needs cut tiles anyway.

Each outlet does need a box extender once tile and thinset add depth to the wall. Three outlets mean three extenders, bought with the tile so the cover plates sit flush.

Tiles per Square Foot With Grout Joints

In backsplash tile calculator terms, 3 × 6 in subway tile runs 7.52 tiles per sq ft with a 1/8 in joint, not the 8 that plain area math gives. On the 29.5 sq ft sample wall, joints cut the count from 236 to 222 tiles before waste.

n is the tiles per sq ft, w and l the tile width and length in inches, and j the grout joint width. Each tile takes up its own face plus one joint on two sides, so the tile and joint repeat as one cell.

Tile SizeTiles per 100 Sq Ft, Plain AreaTiles per 100 Sq Ft, 1/8 in JointTiles for 40 Sq Ft With 10%Grout for 40 Sq Ft
2 × 8 in9008343675.6 lb
3 × 6 in8007523324.5 lb
4 × 4 in9008463734.5 lb
3 × 12 in4003801683.8 lb
6 × 6 in4003841693.1 lb
4 × 12 in3002881273.1 lb
4 × 16 in225216962.9 lb
12 × 12 in10098441.6 lb
12 × 24 in5049221.2 lb

The joint matters most on small tile in any backsplash calculator count. A 1/16 in joint puts 776 subway tiles on 100 sq ft, 1/8 in puts 752 and 3/16 in puts 730, while the grout for the sample wall rises from 1.7 lb to 3.3 lb and then 4.9 lb.

Large format tile breaks the backsplash calculator area math on a short wall. A 600 × 1200 mm tile is taller than an 18 in backsplash both ways, so every piece is cut down to the band height and the offcut rarely fits elsewhere.

In backsplash calculator math, that cut case needs 17 tiles per 100 sq ft instead of the 13 that area alone suggests. Large tiles on an 18 in band trade fewer grout lines for more waste, so they only pay off on a full-height wall.

Thinset, Grout and Edge Trim

The sample 29.5 sq ft backsplash calculator wall takes 3.3 lb of sanded grout, about 17 lb of thinset and one 8 ft edge trim. One 10 lb grout bag and one 50 lb thinset bag cover it with plenty left over.

Grout fills only the joint share of the wall, 5.96% for 3 × 6 in tile at 1/8 in, to the 5/16 in tile depth. At 73 lb of grout powder per cubic foot of joint, the yield behind MAPEI's coverage chart, that comes to 3.34 lb for the sample wall.

The Tile Grout Calculator breaks grout down further by tile size and joint width. Joints of 1/8 in and wider take sanded grout, while narrower joints, glass tile and polished stone take unsanded.

Thinset in a backsplash calculator estimate depends on the trowel notch. Custom Building Products rates a 50 lb bag of VersaBond at 90 to 100 sq ft with a 1/4 × 1/4 in square notch and 60 to 67 sq ft with a 1/4 × 3/8 in notch.

Planning at 85 sq ft for the 1/4 in notch keeps a margin under that range. The sample wall uses 17 lb at 1/4 × 1/4 in and 25 lb at 1/4 × 3/8 in, so one bag covers either, and the notch choice only changes how much is left.

Edge trim runs along any tile end that stops short of a wall or cabinet, such as the open end of a run. A 36 in exposed edge takes one 8 ft piece.

The 20 ft joint where tile meets the counter gets flexible caulk instead of grout, sized with the Sealant Calculator.

Labor and Material per Square Foot

The sample backsplash costs $945 installed, or $32.03 per sq ft. Materials are $414 and labor at $18 per sq ft is $531, so labor is over half the job even with mid-priced tile.

Tile PriceLabor RateMaterialsInstalled TotalPer Sq Ft
$8.50 per sq ftDIY, $0$414$414$14.03
$8.50 per sq ft$10 per sq ft$414$709$24.03
$4 per sq ft$18 per sq ft$234$765$25.93
$8.50 per sq ft$18 per sq ft$414$945$32.03
$8.50 per sq ft$30 per sq ft$414$1,299$44.03
$25 per sq ft$18 per sq ft$1,074$1,605$54.41

Tile is paid by the box, not by the square foot in the backsplash calculator area. The sample wall needs 245 tiles, but 4 boxes hold 320, so 40 sq ft of tile is bought for a 29.5 sq ft wall, which is why $8.50 tile adds $340.

Small backsplashes cost the most per foot in any bathroom backsplash calculator estimate. A 60 in bathroom vanity splash 4 in high, with a 22 in side splash, is 2.28 sq ft but still needs a whole box and bag of each supply, near $77 per sq ft.

Labor is charged on the net tiled area, so a backsplash cost calculator figure moves most with the installer's rate. Ask for that rate per square foot and for any job minimum, since a small backsplash can fall below it.

Rules, Tile Sizes and Counts

Each answer uses the backsplash calculator sample of 3 × 6 in subway tile at 1/8 in joints and 10% waste unless another tile is named. Box counts assume cartons of 10 sq ft.

How do I calculate how much backsplash I need?

Multiply the counter run by the height to the upper cabinets, then add the range wall and any side wall and subtract windows of 1 sq ft or more. A 216 in run at 18 in is 3,888 sq in, or 27 sq ft, before the range and window.

Turn the backsplash square footage calculator area into tiles with the tile plus one joint, then add waste. At 7.52 subway tiles per sq ft, 29.5 sq ft needs 222 tiles, and 10% more makes 245, rounded up to 4 boxes.

Wall tile beyond the backsplash calculator job follows the same steps. Measure each flat section as a rectangle in inches, divide by 144 for square feet, and treat the tile plus joint as one unit.

How much per sq ft for a backsplash?

A tiled backsplash runs about $25 to $55 per sq ft installed at tile prices of $4 to $25 per sq ft and $18 labor. The sample 29.5 sq ft wall is $32.03 per sq ft with $8.50 tile.

A 40 sq ft backsplash calculator estimate at the same prices comes to $1,219, or $30.48 per sq ft, with 5 boxes of tile, one grout bag and one thinset bag. Done as DIY, that same wall is $499 in materials.

Pricing a job works the same way from the other side. Charge labor on the net tiled area, add the whole boxes of tile, the supplies and trim, then add any job minimum for very small walls.

How many tiles for 100 sq ft?

A 100 sq ft wall takes 108 tiles of 12 × 12 in with 10% waste, 828 tiles of 3 × 6 in and 317 tiles of 4 × 12 in. Those all assume 1/8 in joints and come to 11 boxes of 10 sq ft.

Area12 × 12 in3 × 6 in4 × 12 in
50 sq ft54414159
100 sq ft108828317
200 sq ft2161,656634
300 sq ft3242,483951

Outside the backsplash calculator, a 10 × 10 ft room floor is 100 sq ft, so it takes the same 108 tiles of 12 × 12 in. A 1/16 in joint or a larger floor joint changes that count, so use the joint the tile will actually get.

What is the rule of thumb for backsplash?

Tile 18 in high between the counter and the upper cabinets, run tile up to the hood behind the range, and order 10% extra for a straight or brick lay or 15% for diagonal and herringbone.

On the backsplash calculator sample wall, 15% waste raises the count from 245 to 256 tiles and 20% to 267, but all three still fit in 4 boxes of 80. The waste choice changes the box count only when the total sits near a carton edge.

What is the best size backsplash tile?

For an 18 in backsplash, tiles from 3 × 6 in to 4 × 16 in fit the band with few cuts in a backsplash tile layout calculator plan. Five rows of 3 × 6 in subway tile with 1/8 in joints come to 15.6 in, so the top row is cut to about 2 1/4 in.

Tile taller than the band, like 24 × 48 in, cuts every piece and wastes the rest. Smaller tile adds grout lines, so 2 × 8 in tile needs 834 tiles per 100 sq ft against 216 for 4 × 16 in, nearly four times as many pieces to set.