Tile Calculator

Updated

Tile calculator for tiles, boxes, cut pieces and grout pounds on a floor, wall, shower or L-shaped room, from tile size, grout joint and layout pattern, with tile plus labor costs.

Area & Tile

Tile length runs along the floor length; the layout is centered on the room.

Waste, Grout & Skirting 10% Waste · 3/8 in Thick
Price, Boxes & Units $2.50/sq ft · US
12 × 24 in Tiles, Straight Grid
65 Tiles to Buy
9 Boxes of 8 Tiles
120 sq ft to Tile
Sq Ft per Tile + Joint2.03
Tiles Before Waste60
Area to tile after openings, how many tiles one square unit takes with the grout joint, and the count before any waste is added.
32 Whole + 28 Cut Pieces
End Cuts Along Length23 11/16 in Each End
End Cuts Along Width11 7/16 in Each Side
Tiles left whole and pieces cut at the edges when the layout is centered on the space, with the size of the cut piece at each end.
6.45 lb Sanded or Unsanded Grout
Grout Package1 × 25 lb Bag
Total Joint Length178 ft 5 3/8 in
Grout to fill every joint at your joint width and tile depth, using the yield backed out of the Polyblend coverage chart.
$350.00 Total Cost
Tiles$325.00
Grout$25.00
Tiles at your price basis, grout by the full package, and labor on the tiled area when you enter a labor rate.
Tile Layout Plan60 Pieces From 60 Tiles
blue whole tiles, pink cut pieces
AreaRowsRow HeightPieces Along the Row
Floor211 7/16 in23 11/16 in + 4 × 24 in + 23 11/16 in
Floor812 in23 11/16 in + 4 × 24 in + 23 11/16 in
Tiles by Tile SizeArea method, 1/8 in joint
TileSq Ft per TileTiles per 100 Sq FtTiles for 120 sq ft + 10%
4 × 4 in0.1118471,118
3 × 6 in0.125753994
6 × 6 in0.25384507
12 × 12 in198130
6 × 24 in198129
12 × 24 in25065
18 × 18 in2.254458
24 × 24 in42533
24 × 48 in81317
Tiles for Common Areas12 × 24 in Tiles
AreaTiles, No WasteWith 10% WasteBoxes
50 sq ft25284
100 sq ft50557
120 sq ft60659
150 sq ft748211
200 sq ft9910914
300 sq ft14816321
Step-by-Step MathTiles = max(area method, cut layout)
  1. Area = 12 ft × 10 ft = 120 sq ft.
  2. Tile with joint = (2 ft + 1/8 in) × (1 ft + 1/8 in) = 2.03 sq ft.
  3. Area method = 120 sq ft × 1.1 ÷ 2.03 sq ft = 64.98, rounded up to 65.
  4. Cut layout = 60 tiles; buy the larger count, 65.
  5. Grout = 120 sq ft × 1.54% joint share × 3/8 in deep = 100 cu in ÷ 15.5 cu in per lb = 6.45 lb.
  6. Cost = tiles $325.00 + grout $25.00 = $350.00.
  7. Result: 65 Tiles to Buy.
Start the Layout From the Center
Set a grout joint on the length center line and a grout joint on the width center line. That keeps every edge cut at half a tile or more where the space allows.

Tile Calculator Counts for 100 and 120 Sq Ft

A 12 × 10 ft floor of 12 × 24 in tiles with a 1/8 in grout joint needs 65 tiles with 10% waste, or 9 boxes of 8. Without waste the count is 60, because each tile plus its share of joint covers 2.04 sq ft, not 2.

That is the tile calculator formula for any floor or wall. A is the area to tile, w is the waste share as a decimal, l and t are the tile length and width and g is the grout joint.

Adding the joint to each side gives the module one tile really covers, which is why a 12 × 12 in tile covers 1.02 sq ft on the floor.

Tile sizeSq ft per tileTiles per sq ft100 sq ft, no waste100 sq ft + 10%120 sq ft + 10%
4 × 4 in0.1118.468479311,118
3 × 6 in0.1257.52753828994
6 × 6 in0.253.84384423507
12 × 12 in1.00.9898108130
6 × 24 in1.00.9798108129
12 × 24 in2.00.49505565
18 × 18 in2.250.44444958
24 × 24 in4.00.25252833
24 × 48 in8.00.12131417

Every tile calculator square feet figure in that table uses a 1/8 in joint. The joint matters most on small tiles, where 4 × 4 in tiles cover 6% more than their face area suggests, and least on large format, where it barely moves the count.

In any floor tile calculator estimate, round up to whole boxes after the waste, not before. A 65-tile order at 8 per box is 8.13 boxes, so 9 boxes and 7 spare tiles, which is the stock to keep for future repairs.

Edge Cuts That Push the Count Past 10%

A flat 10% waste covers most tile calculator for floor estimates, but large tiles in a room that does not divide evenly can need more. A 15 × 11 ft floor of 24 × 24 in tiles needs 45 tiles by area with 10% waste, yet a centered cut layout needs 48.

That room leaves cuts of 17-9/16 in at each end and 17-11/16 in at each side. Each cut piece takes most of a tile, and the 6-3/8 in offcut is too small to fill any other gap, so 24 of the 48 tiles become one cut piece each.

Room and tileArea + 10%Centered layoutWhole / cut piecesTiles to buy
10 × 10 ft, 12 × 24 in555024 / 2655
12 × 10 ft, 12 × 24 in656032 / 2865
13 × 11 ft, 12 × 24 in787745 / 3278
13 × 13 ft, 24 × 24 in464925 / 2449
15 × 11 ft, 24 × 24 in454824 / 2448

In tile calculator terms, the 13 × 11 ft room comes within one tile of its 10% allowance, so any breakage would leave it short. Buy the larger of the two counts, then add a few spares on top when the layout and the waste figure land that close.

Centering the layout keeps edge cuts even on both sides, the step a basic tile calculator online often skips. Start with a tile or a grout joint on each center line, whichever leaves the bigger edge piece, so no wall gets a thin sliver that cracks when cut.

Patterns From Straight Grid to Herringbone

On the same 12 × 10 ft floor of 12 × 24 in tiles, the tile calculator count for a straight grid, 1/2 offset and 1/3 offset all cut from 60 tiles, so a 10% allowance covers each. A 45° diagonal needs 71 tiles, about 18% over the straight count, because every edge tile is a triangle.

Pattern, 12 × 10 ftArea + 10%Cut layoutWhole tilesCut piecesTiles to buy
Straight grid6560322865
1/2 offset6560362965
1/3 offset6560382865
Diagonal 45°6571354671

The diagonal tile calculator count pairs its 20 small edge triangles two to a tile. Herringbone has no simple cut plan, since every row ends in a zigzag, so price it on area plus a waste allowance well above 10% and confirm with the installer.

Offsets carry a code limit on long tiles. ANSI A108.02 Section 4.3.8.2 caps the offset at 33% where the offset side is over 15 in, unless the tile maker allows more.

The Ceramic Tile Education Foundation quotes the rule in Offsets, Grout Joints and Customer Expectations, and it belongs in any ceramic tile calculator plan for planks.

That rule puts a 12 × 24 in plank on a 1/3 offset, not a 1/2 offset, because most long tiles have a slight bow. A half offset lines the high center of one tile up with the low end of the next and shows as lippage.

The same standard, Section 4.3.8.1, adds a joint minimum for those offset layouts. Running bond with any tile side over 15 in needs an average joint of at least 1/8 in for rectified tile and 3/16 in for calibrated tile.

In tile calculator results, a 3/16 in joint on 12 × 24 in tiles keeps the 120 sq ft count at 65, but grout rises by half, from 6.45 lb to about 9.6 lb, so check whether the tile is rectified or calibrated before choosing the joint.

Walls, Showers and Bathroom Tile

For a wall tile calculator for walls, measure the run times the height, and every wall to be tiled adds into one run. A 5 × 2-1/2 ft shower with a back wall and two side walls tiled 8 ft high is 80 sq ft, which takes 44 tiles of 12 × 24 in with 10% waste.

Shower tile, 80 sq ftJointArea + 10%Cut layoutTiles to buyGrout
12 × 24 in1/8 in4444444.3 lb
12 × 12 in1/8 in8788885.7 lb
4 × 12 in1/16 in2592482595.7 lb
3 × 6 in subway1/16 in6836406838.5 lb

The 12 × 12 in shower is the one tile calculator shower case where cuts beat the waste allowance, by a single tile. Narrow side walls of 30 in leave cut pieces on both edges, and they cannot all come from the offcuts of the back wall.

A tile calculator for bathroom floors and kitchen backsplashes follows the same two methods. Floor area comes from length times width, and a backsplash is its run times its height, less the window or range hood space, which you can size with the Wall Square Footage Calculator.

A shower floor needs a sloped mortar bed under the tile, sized in the Deck Mud Calculator. The corners where walls meet the floor and tub get a flexible sealant instead of grout, counted in the Sealant Calculator.

A roof tile calculator count runs the same math with an overlap instead of a joint. A 12 × 16 in tile lapped 3 in each way shows a 9 × 13 in face, so a 100 sq ft roof plane takes 124 tiles before waste, not the 75 its full size suggests.

A ceiling tile calculator count for a drop ceiling is simpler, since 2 × 2 ft panels sit in a grid with no joint. A 12 × 10 ft ceiling takes 30 panels with no cuts, since both sides divide evenly by 2 ft, while odd sizes need edge panels trimmed equally on opposite walls.

Grout Pounds by Tile Size and Joint

Grout fills the joints, so in a tile calculator its volume is the joint share of the floor times the tile thickness. A 12 × 10 ft floor of 3/8 in thick 12 × 24 in tiles with 1/8 in joints takes 6.45 lb of grout, which fits in one 7 lb box instead of a 25 lb bag.

G is the grout volume, A the tiled area, l and t the tile size, g the joint and d the tile thickness. Dividing by about 15.5 cu in per lb, the yield behind Custom Building Products' Polyblend coverage chart, turns volume into pounds.

3/8 in thick tile1/16 in joint1/8 in joint3/16 in joint1/4 in joint
12 × 12 in3.6 lb7.1 lb10.6 lb14.1 lb
6 × 24 in4.5 lb8.9 lb13.2 lb17.4 lb
12 × 24 in2.7 lb5.4 lb8.0 lb10.6 lb
24 × 24 in1.8 lb3.6 lb5.4 lb7.1 lb

Each tile calculator grout figure is per 100 sq ft. The math lands within about 2% of Polyblend's sanded grout coverage chart for 12 × 12 × 3/8 in tile, which lists 345 sq ft per 25 lb bag at 1/8 in and 175 sq ft at 1/4 in.

Polyblend sanded grout is made for joints from 1/8 to 1/2 in and comes in 7 lb boxes and 25 or 50 lb bags, so a small floor rarely needs the big bag. Joints under 1/8 in take unsanded grout, and a 1/8 in joint can take either, so match the bag to the joint before you buy.

Wall tile is often thinner than floor tile, which cuts grout in proportion. A 1/4 in wall tile at the same joint uses two-thirds of the grout of a 3/8 in floor tile.

Centimeter Sizes and m² Counts

A 60 × 60 cm tile covers 0.36 m², so one square meter takes 2.78 tiles before joints and waste. A tile calculator cm or sqm count, for UK, Australia or Philippines buyers, follows the same module math in millimeters.

Tile sizem² per tileTiles per m², 3 mm joint10 m² + 10%20 m² + 10%
30 × 30 cm0.0910.89120240
30 × 60 cm0.185.4761121
60 × 60 cm0.362.753161
60 × 120 cm0.721.381631

One square meter is 10.76 sq ft, so multiply a tile calculator m2 result by 10.76 for a US quote, whatever the store, from B&Q to CTM or a Mariwasa dealer. A 60 × 60 cm tile is close to 24 × 24 in but about 3/8 in smaller each way, so do not mix metric tile with inch-based counts.

Pricing a Tile Job by the Square Foot

Tile floors cost $15 to $20 per sq ft installed, with labor at $3 to $15 per sq ft, according to Angi's August 2026 tile floor installation cost guide. A 100 sq ft room at those rates runs $1,500 to $2,000.

Material is the part of a tile calculator cost total that changes most with the tile. The same guide lists ceramic at $0.50 to $7 per sq ft, porcelain at $3 to $10, marble at $5 to $25 and slate at $10 to $16.

12 × 10 ft floor, 12 × 24 in tileBasisCost
Tile65 tiles × 2 sq ft at $2.50$325.00
Grout1 bag of 25 lb at $25.00$25.00
Materials total$2.92 per sq ft of floor$350.00

In a tile calculator cost line, tile is priced on the tile you buy, 130 sq ft here, while labor is quoted on the 120 sq ft you tile. Pricing the waste tiles at the labor rate is a common way a quote gets padded.

Thinset, backer board, a self-leveler and trim add to the tile calculator materials line. Stone floors need their own sealing and setting costs, priced in the Marble Flooring Cost Calculator, and a stiff floor under the tile starts with the Subfloor Calculator.

Short Answers on Tile Counts, Boxes and Sizes

Each tile calculator answer below uses a 1/8 in grout joint, 3/8 in thick tile and 10% waste unless the question names something else.

How do I calculate how many tiles I need?

Multiply the length by the width for square feet, divide by the area one tile covers with its joint, add 10% and round up. A 12 × 10 ft room of 12 × 24 in tiles is 120 ÷ 2.04 = 58.8, then 64.7 with waste, so 65 tiles.

Then check the cuts. Large tiles in an odd-sized room can need more than the 10% covers, as the 15 × 11 ft room of 24 × 24 in tiles shows at 48 tiles against 45.

How many 12x12 tiles for 120 sq ft?

A 120 sq ft floor takes 130 tiles of 12 × 12 in with 1/8 in joints and 10% waste. Without waste it is 118, and with no joints and 10% waste it would be 132.

How many tiles for 100 sq ft?

A 100 sq ft floor takes 108 tiles of 12 × 12 in, 55 of 12 × 24 in, 28 of 24 × 24 in or 423 of 6 × 6 in, all with 10% waste. Divide 100 by the tile's area in square feet and add the waste to check any other size in a tile calculator square foot estimate.

How many 12x24 tiles for 100 sq ft?

You need 55 tiles of 12 × 24 in for 100 sq ft, from 50 tiles of floor coverage plus 10% waste. Each tile covers 2 sq ft of face and 2.04 sq ft once its 1/8 in joints are counted.

How many tiles per sqft?

A square foot takes 0.98 of a 12 × 12 in tile, 3.84 tiles of 6 × 6 in and 8.46 tiles of 4 × 4 in with 1/8 in joints. Divide 144 by the tile length plus joint times the width plus joint, all in inches.

How much will 10 12x12 tiles cover?

Ten 12 × 12 in tiles cover 10 sq ft of tile face and about 10.2 sq ft of floor once laid with 1/8 in joints. Keep 10% back for cuts, and they cover about 9.3 sq ft of a real room.

What size tile is 1 sq ft?

A 12 × 12 in tile is exactly 1 sq ft, and so is a 6 × 24 in plank. A 24 × 24 in tile is 4 sq ft and a 12 × 24 in tile is 2 sq ft.

What size is a 2x2 tile in feet?

A 2 × 2 tile is 2 ft by 2 ft, or 24 × 24 in, and covers 4 sq ft. A 100 sq ft floor takes 25 of them before waste and 28 with 10%.

Is 12x12 200 square feet?

A 12 × 12 ft room is 144 sq ft, not 200. A 200 sq ft floor would be about 14 ft 2 in square, or 10 × 20 ft, and takes 216 tiles of 12 × 12 in with 10% waste.

How many 12x12 tiles come in a box?

Box counts vary by maker, so read the square feet printed on the carton. Because each 12 × 12 in tile is 1 sq ft, the box's square footage is also its tile count, and 130 tiles for a 120 sq ft floor means dividing 130 by that number and rounding up.

How many tiles do I need for a 10x10 room?

A 10 × 10 ft room needs 108 tiles of 12 × 12 in, 55 of 12 × 24 in, 49 of 18 × 18 in or 28 of 24 × 24 in, all with 1/8 in joints and 10% waste. The 18 × 18 in tile lands at exactly its 10% figure once its edge cuts are planned.

How much do 10*10 tiles cost?

Tiling a 10 × 10 ft room costs about $1,500 to $2,000 installed at Angi's $15 to $20 per sq ft. Materials alone for 108 tiles of 12 × 12 in at $2.50 per sq ft and one bag of grout come to about $295.

How do I estimate my tile cost?

Multiply the tile square footage you buy by the price per square foot, then add grout by the bag and labor on the floor area. For the 12 × 10 ft room, 130 sq ft of tile at $2.50 is $325, plus $25 of grout.

What is a tile layout calculator?

A tile layout estimate plans where each tile lands, centered on the room, instead of dividing area alone. It finds the edge cuts, such as 17-9/16 in pieces in a 15 × 11 ft room of 24 × 24 in tiles, and counts how many tiles those cuts use up.

Can I use the tile calculator for walls?

Walls work the same way, as run times height. Add the length of every wall you will tile into one run, multiply by the tile height, and subtract windows and doors. An 80 sq ft shower takes 44 tiles of 12 × 24 in or 683 subway tiles of 3 × 6 in.

How do I use the tile calculator for different spaces like bathrooms or kitchens?

For a bathroom or kitchen tile calculator estimate, measure floors and walls separately, since they often use different tiles and joints. A bathroom with a 40 sq ft floor and an 80 sq ft shower is two counts, and a kitchen backsplash is a wall run times its 18 in or so of height.

How accurate is the tile calculation formula?

The tile calculator formula is exact for the face it covers, so errors come from ignoring the joint or the cuts. Dropping a 1/8 in joint on 4 × 4 in tiles overcounts by 6%, and skipping the cut plan undercounts a 15 × 11 ft room of 24 × 24 in tiles by 3 tiles.

How do I choose the right tile size?

Choose a size whose cuts suit the room. Large tiles cut fewer joints and less grout, but in a small or odd-sized room they leave big offcuts, and planks over 15 in long should go on a 1/3 offset or less under ANSI A108.02.

Check the joint too before any tile calculator app count. On an offset with tiles over 15 in, ANSI sets the average joint at 1/8 in or more for rectified tile and 3/16 in or more for calibrated tile, so a calibrated 12 × 24 in plank cannot run as tight as a rectified one.

What if I want to include skirting in my tile estimate?

Skirting is the room perimeter divided by the tile length, then grouped by how many strips one tile yields. A 12 × 10 ft room has a 44 ft perimeter, which takes 22 strips of 4 in skirting cut three to a 12 × 24 in tile, or 8 more tiles.

Subtract door openings from the perimeter first. Wood or MDF trim is the alternative, counted in the Baseboard Trim Calculator.

Can I calculate grout requirements as well?

Grout follows the joint share of the area times the tile thickness. A 120 sq ft floor of 12 × 24 × 3/8 in tile at 1/8 in joints needs 6.45 lb, and the same floor in 12 × 12 in tile at 1/4 in joints needs about 17 lb.

What about irregularly shaped rooms?

Split the room into rectangles and run a tile calculator count on each one. An L-shaped room of 12 × 10 ft plus a 6 × 4 ft alcove is 144 sq ft and takes 78 tiles of 12 × 24 in with 10% waste, or 10 boxes of 8.