Hardwood Flooring Cost Calculator

Updated

Hardwood flooring cost calculator for solid or engineered wood by room size or floor area, buying whole boxes after waste and pricing underlayment, install labor, removal and trim.

Floor Size, Flooring Type and Boxes

Enter the room size and the coverage printed on the flooring box. Wood is bought in whole boxes after the waste allowance.

%
ft
ft
rooms
sq ft
sq ft
in
Hardwood Price, Labor and Underlayment$4-$15/sq ft wood

Prices load as typical US ranges for solid hardwood. Enter one price twice if you already have a quote.

$/sq ft
$/sq ft
$/sq ft
$/sq ft
$/sq ft
Old Floor Removal, Subfloor and BaseboardsNo prep added

Removal includes hauling. Enter a baseboard length only if new baseboards go in with the floor.

$/ft
$/ft
ft
$/sq ft
$/sq ft
$/sq ft
$/sq ft
Hardwood Flooring Cost
$5,375 Midpoint Estimate
Installed bid range $2,350 - $8,400
17 Boxes of Flooring
Flooring to Buy340 sq ft
Area With 10% Waste330 sq ft
Floor area plus the waste allowance for cuts and culled boards, rounded up to whole boxes at the coverage on the carton.
$3,425 Wood and Underlayment
Wood at Low Price$1,360
Wood at High Price$5,100
Every box you buy at your wood price range, plus underlayment under the area laid. Nails or glue are part of the install.
$1,950 Installer Labor
Labor at Low Rate$900
Labor at High Rate$3,000
Area laid times your installer rates. Glue-down work sits near the high rate and nail-down or floating near the low rate.
$17.92/sq ft Installed
1,000 sq ft at These Rates$17,600
Midpoint per Box$316.18
Midpoint over the floor area. The size rows use the same rates with waste but before rounding to whole boxes, as in the table.
Plank Layout With Your Numbers36 plank rows
20 ft × 15 ft, 5 in planks36 rows of plank across the 15 ft width17 boxes · 816 linear ft of plank
Cost by Floor Size and Solid vs. Engineered7 floor sizes, 2 types
Floor SizeLowHighMidpoint
200 sq ft$1,540$5,500$3,520
500 sq ft$3,850$13,750$8,800
1,000 sq ft$7,700$27,500$17,600
1,200 sq ft$9,240$33,000$21,120
1,500 sq ft$11,550$41,250$26,400
2,000 sq ft$15,400$55,000$35,200
3,000 sq ft$23,100$82,500$52,800
TypeWoodLaborSandings
Solid Hardwood$4-$15/sq ft$3-$10/sq ft6 to 8 times
Engineered Hardwood$3-$12/sq ft$1.2-$7.5/sq ft0 to 3+, by wear layer
Step-by-Step Hardwood Cost Math9 steps
Floor area20 × 15 ft = 300 sq ft
With waste300 sq ft × 1.1 = 330 sq ft
Boxes330 ÷ 20 sq ft per box = 16.5, buy 17 (340 sq ft)
Plank run340 sq ft ÷ 5 in plank width = 816 linear ft
Wood340 sq ft × $4.00 to $15.00 = $1,360.00 to $5,100.00
Underlayment300 sq ft × $0.30 to $1.00 = $90.00 to $300.00
Labor300 sq ft × $3.00 to $10.00 = $900.00 to $3,000.00
Bid rangeSum of the lines above = $2,350.00 to $8,400.00
Midpoint($2,350.00 + $8,400.00) ÷ 2 = $5,375.00, or $17.92/sq ft
Solid Hardwood Sands 6 to 8 Times
Engineered boards should not be sanded below a 3/32 in wear layer, so a thin layer allows none. The higher price of solid wood buys more sandings over the life of the floor.

A 300 sq ft Room in Hardwood Flooring Cost Calculator Math

A 20 x 15 ft room in solid hardwood costs $2,350 to $8,400 installed, a $5,375 midpoint or $17.92 per sq ft. That uses wood at $4 to $15 per sq ft and labor at $3 to $10, the ranges in HomeGuide's hardwood flooring cost guide.

LineQuantityLowHigh
Solid hardwood17 boxes, 340 sq ft$1,360$5,100
Underlayment300 sq ft$90$300
Installer labor300 sq ft$900$3,000
Total$7.83 to $28.00 per sq ft$2,350$8,400

Wood is bought by the box, so the 330 sq ft needed with 10% waste becomes 17 boxes of 20 sq ft, or 340 sq ft. Underlayment and labor are priced on the 300 sq ft actually laid.

C is the installed cost, A the floor area and w the waste percent. B is the coverage printed on one box, p the wood price, u the underlayment rate and r the labor rate, all per sq ft.

Wood is the swing line in any hardwood flooring cost calculator estimate. Its $3,740 spread is bigger than the $2,100 labor spread, so the species and grade decide more of the bill than the installer does.

Solid or Engineered per sq ft

Engineered hardwood brings the same 300 sq ft room to $1,470 to $6,630, a $4,050 midpoint or $13.50 per sq ft. Solid costs $1,325 more at the midpoint, or 33% more, on the same boxes, waste and underlayment.

Floor typeWood per sq ftLabor per sq ft300 sq ft installedMidpoint
Solid hardwood$4 to $15$3 to $10$2,350 to $8,400$5,375
Engineered hardwood$3 to $12$1.20 to $7.50$1,470 to $6,630$4,050

The engineered rates come from ConsumerAffairs' engineered hardwood cost guide, which puts materials at 50% to 80% of the job. An engineered hardwood flooring cost estimator should carry its lower labor range as well as the cheaper wood.

Solid wood also handles moisture poorly. HomeGuide's engineered vs. solid comparison rates solid low and engineered high for moisture resistance, which matters over concrete slabs and in basements.

Floor Sizes From 200 to 3,000 sq ft

A 1,000 sq ft solid floor costs $7,700 to $27,500, a $17,600 midpoint, and engineered costs $4,800 to $21,700.

These hardwood flooring cost calculator totals add 10% waste to the wood but skip rounding to whole boxes, which matters little at this size.

Floor areaBoxes of 20 sq ftSolid installedSolid midpointEngineered installedEngineered midpoint
200 sq ft11$1,540 to $5,500$3,520$960 to $4,340$2,650
500 sq ft28$3,850 to $13,750$8,800$2,400 to $10,850$6,625
1,000 sq ft55$7,700 to $27,500$17,600$4,800 to $21,700$13,250
1,200 sq ft66$9,240 to $33,000$21,120$5,760 to $26,040$15,900
1,500 sq ft83$11,550 to $41,250$26,400$7,200 to $32,550$19,875
2,000 sq ft110$15,400 to $55,000$35,200$9,600 to $43,400$26,500
3,000 sq ft165$23,100 to $82,500$52,800$14,400 to $65,100$39,750

Per sq ft, solid runs $7.70 to $27.50 and engineered $4.80 to $21.70 once waste and underlayment are in. HomeGuide's installed ranges, $11 to $25 solid and $7 to $20 engineered, sit inside both bands.

A hardwood flooring cost calculator range this wide narrows fast with one real quote. A single wood price and a single labor rate collapse each row to one figure.

Cartons, Waste and Plank Run

The carton size changes a hardwood flooring cost calculator bill even when the floor stays the same. For 300 sq ft with 10% waste, 22 sq ft cartons buy exactly 330 sq ft, while 31 sq ft cartons buy 341 sq ft and leave 11 sq ft over.

Coverage per boxBoxes for 300 sq ftWood boughtBoxes for 12 x 12 roomWood bought
18.5 sq ft18333 sq ft9166.5 sq ft
20 sq ft17340 sq ft8160 sq ft
22 sq ft15330 sq ft8176 sq ft
24 sq ft14336 sq ft7168 sq ft
31 sq ft11341 sq ft6186 sq ft

Waste rounding hides inside the box count of any hardwood flooring cost calculator order. At 20 sq ft cartons, 7% and 10% waste both buy 17 boxes for the 300 sq ft room, and only dropping to 5% saves a box, worth $80 to $300 of solid wood.

Plank width sets the linear feet an installer handles. The 340 sq ft bought is 1,813 linear ft of 2 1/4 in strip, 816 ft of 5 in plank and 453 ft of 9 in plank, which is one reason narrow strip floors take longer to lay.

L is the plank run in linear feet, S the square feet bought and pw the plank face width in inches. The 12 turns inches of width into feet.

The Flooring Calculator estimates square feet and boxes with waste for other floor types, and the Board Coverage Calculator counts boards by width for walls and floors.

Sanding Limits by Wear Layer

Most solid wood floors can be sanded six to eight times over their service life, per Hardwood Floors magazine, NWFA's publication. Engineered floors depend on the wear layer, from 0 to about 6 sandings.

The same article sets the limits. A traditional sanding removes 1/32 to 1/16 in of wood, and sanding is not recommended once the wear layer is under 3/32 in, or 2.38 mm.

Engineered wear layerSandings at 1/16 in removedSandings at 1/32 in removed
2 mm (0.079 in)00
3 mm (0.118 in)11
4 mm (0.157 in)23
6 mm (0.236 in)35
1/4 in (6.35 mm)36

Each count is the number of sandings that start with at least 3/32 in left. A 2 mm wear layer is below the limit from day one, so the saving on a thin-veneer floor comes with no sanding at all, only recoats.

That changes the solid vs. engineered sum in a hardwood flooring cost calculator comparison. A $1,325 saving on 300 sq ft buys a floor that cannot be refinished if the wear layer is 2 mm, and one close to solid if it is 6 mm or more.

Removal, Subfloor and Baseboard Add-Ons

Removing an old floor at $1.50 to $3.50 per sq ft, HomeGuide's range, lifts the 300 sq ft solid job to $2,800 to $9,450, a $6,125 midpoint. Adding a new subfloor at $2.20 to $4.75 per sq ft takes it to $3,460 to $10,875.

Prep on 300 sq ftRate per sq ftInstalled rangeMidpoint per sq ft
Subfloor readyNone$2,350 to $8,400$17.92
Remove old floor$1.50 to $3.50$2,800 to $9,450$20.42
Remove and replace subfloor$3.70 to $8.25$3,460 to $10,875$23.89

Full prep raises the midpoint by 33% on the same wood. A hardwood flooring cost calculator total without prep lines fits new construction, not a tear-out over an old subfloor. The Subfloor Calculator counts the sheets.

New baseboards run by the foot, so they sit outside any per sq ft hardwood flooring cost calculator rate.

The room's 70 ft perimeter at $2 to $6 per foot adds $140 to $420, for $2,490 to $8,820 in all. The Baseboard Trim Calculator finds the length and pieces.

Installer Rates and the DIY Saving

In the hardwood flooring cost calculator split for the 300 sq ft room, labor is $900 to $3,000, a $1,950 midpoint and 36% of the job. Laying it yourself saves that $1,950, while the $3,425 midpoint for wood and underlayment stays the same.

Method sets where a rate lands. HomeGuide ranks nail-down as the lowest-cost method, glue-down moderate and floating the highest for hardwood, so an installer's quote should name the method before it is compared.

Unfinished wood adds on-site sanding and finishing. HomeGuide prices refinishing solid hardwood at $1.50 to $5 per sq ft, which is the scale of the extra line for a site-finished floor in a hardwood floor cost estimator.

Spread over the job, the midpoint is $316.18 per box laid. That hardwood flooring cost calculator figure helps check a quote that bundles wood and labor into one price per carton.

Hardwood Against Tile, Laminate, Vinyl and Carpet

Hardwood costs $5 to $25 per sq ft installed, against $1 to $5 for laminate and $5 to $10 for vinyl or carpet, per HomeAdvisor's wood flooring cost guide. Tile runs $10 to $50 installed on HomeGuide's tile figures.

On the 300 sq ft room, a $17.92 hardwood flooring cost calculator midpoint compares with laminate's $1 to $5 band, so laminate saves several thousand dollars. The Laminate Flooring Installation Cost Calculator prices that option.

Tile and hardwood overlap in price. The Tile Installation Cost Calculator and the Carpet Calculator run the same room on those floors for a direct comparison.

Answers by Square Footage and Floor Type

Each answer below uses the solid rates of $4 to $15 wood and $3 to $10 labor, or engineered at $3 to $12 and $1.20 to $7.50, with 10% waste and 20 sq ft boxes unless it names other figures.

How much does 1000 sq ft of hardwood flooring cost?

A 1,000 sq ft hardwood floor costs $7,700 to $27,500 in solid wood or $4,800 to $21,700 engineered. Removal at $1.50 to $3.50 per sq ft adds $1,500 to $3,500 on a replacement job.

How much does 1200 sq ft of hardwood flooring cost?

Hardwood for 1,200 sq ft costs $9,240 to $33,000 solid, a $21,120 midpoint, or $5,760 to $26,040 engineered. The hardwood flooring cost calculator order is 66 boxes of 20 sq ft, or 3,168 linear ft of 5 in plank.

How much does 2000 sq ft of hardwood flooring cost?

A 2,000 sq ft floor costs $15,400 to $55,000 in solid hardwood and $9,600 to $43,400 engineered. That is 110 boxes, and a hardwood flooring cost calculator midpoint of $35,200 for solid.

How much does 500 sq ft of hardwood flooring cost?

Solid hardwood for 500 sq ft costs $3,890 to $13,900 with 28 whole boxes, an $8,895 midpoint. Engineered costs $2,430 to $10,970 in the same hardwood flooring cost calculator run.

HomeGuide's $3,500 to $12,500 for 500 sq ft matches the solid band closely, which is $7 to $25 times the area with no waste added.

How much is 200 square feet of hardwood flooring?

Two hundred sq ft costs $1,540 to $5,500 in solid hardwood and $960 to $4,340 engineered. The order is 11 boxes, so 220 sq ft arrives and none is left over at 10% waste.

How much does 1500 sq ft of flooring cost?

For 1,500 sq ft of hardwood, plan on $11,550 to $41,250 solid or $7,200 to $32,550 engineered. Rounding to 83 whole boxes adds $40 to $150 over the unrounded figures.

How much does it cost to install 3,000 square feet of hardwood floors?

Installing 3,000 sq ft costs $23,100 to $82,500 in solid hardwood, a $52,800 midpoint, or $14,400 to $65,100 engineered.

Labor alone is $9,000 to $30,000 for solid at $3 to $10 per sq ft, the largest line after wood in that hardwood flooring cost calculator total.

How much does it cost to put hardwood floors in a 12x12 room?

A 12 x 12 room costs $1,115 to $3,984 in solid hardwood, a $2,550 midpoint, and $696 to $3,144 engineered. The hardwood flooring cost calculator order is 8 boxes of 20 sq ft for the 158.4 sq ft needed with waste.

How much does wood flooring cost?

Wood flooring costs $4 to $15 per sq ft for materials and $3 to $10 for labor, per HomeGuide. Species drives the material price, from pine at $3 to $8 to teak at $11 to $20 per sq ft on the same guide.

Is hardwood flooring expensive?

Hardwood is mid-to-high priced. At $5 to $25 per sq ft installed it costs more than laminate at $1 to $5 but overlaps tile, and exotic species such as teak push the material alone to $20 per sq ft.

Which is cheaper, hardwood or engineered hardwood?

Engineered hardwood is cheaper, $13.50 per sq ft at the midpoint against $17.92 for solid in the 300 sq ft room. The trade is refinishing, where solid allows six to eight sandings and a thin engineered veneer may allow none.

Is it cheaper to do tile or hardwood floors?

Hardwood is usually cheaper than tile installed, $5 to $25 per sq ft against $10 to $50 for tile on HomeGuide's figures. A basic tile floor can still undercut premium hardwood, so the grade matters more than the category.

What is cheaper than hardwood flooring?

Laminate is the cheapest common option at $1 to $5 per sq ft installed, per HomeAdvisor, and vinyl and carpet run $5 to $10. On a 300 sq ft room, laminate at $5 costs $1,500 against the $5,375 solid hardwood midpoint.

How to calculate flooring cost?

Multiply the area by one plus the waste, round up to whole boxes, then price the wood bought and add underlayment and labor on the area laid.

Worked on 300 sq ft of solid hardwood, that method buys 17 boxes for a hardwood flooring cost calculator range of $2,350 to $8,400.

What is the lifespan of hardwood floors?

Hardwood can last decades to over a century with upkeep, per HomeGuide, which suggests refinishing every 7 to 10 years. Six to eight sandings at 7 to 10 year intervals cover 42 to 80 years on a solid floor.

What are the disadvantages of wood flooring?

Wood reacts to moisture, needs periodic sanding and costs more than laminate. Solid wood rates low for moisture resistance, which rules it out over damp slabs, and thin engineered veneers cannot be sanded back.

What is the Rule of 3 for flooring?

In design, the rule of 3 means no more than three flooring finishes across a home, as House Digest explains. On the install side, Fine Homebuilding racks boards from three or four boxes to blend color.

What to never use on hardwood floors?

Never use a steam mop or excess water, and never put wax over a surface finish, per the NWFA maintenance guide. Steam forces moisture into the boards and can damage the finish and the wood.