Countertop Calculator

Updated

Countertop calculator for straight, L, U, galley and island layouts, with corners counted once, backsplash area, slabs after nesting, quartz or granite weight, and installed costs.

Countertop Layout & Size

Measure each run along the wall to the outside corner. Standard kitchen depth is 25 1/2 in with the front overhang.

in
in
in
in
Island & PeninsulaIsland 72 × 42 in
in
in
in
in
in
Backsplash, Cutouts & Waste4 in splash, 2 cutouts
in
%
Stone, Slab Size & PriceQuartz 3 cm
in
in
in
$/ft
$/sq ft
Countertop Square Footage: L-Shaped + Island
54.73 sq ft Countertop
7,881.75 sq in ÷ 144 across 3 pieces, corner squares counted once
60.73 sq ft with Backsplash
Backsplash Area6.00 sq ft
Order With 10% Waste66.81 sq ft
Add the backsplash strips to the counter tops for the area to fabricate, then add the waste allowance for the area to order.
2 Slabs, 120 × 56 1/2 in
Seams in the TopsOne, at the corner
Area-Only Estimate1.42 slabs
Every piece is nested on the slab with the saw gap. Area-only math divides the order area by one slab and often comes up short.
847 lb Countertop Weight
Heaviest Piece297 lb (Main Run)
Weight per Area13.95 lb/sq ft
Weight comes from stone density and slab thickness. The heaviest piece sets the install crew size and the cabinet bracing it needs.
$4,337.06 Installed Cost
All-In per Sq Ft$71.41
Edge 32.8 ft + 2 Cutouts$693.00
Stone is billed on finished area, backsplash included. Edges are priced per foot and each sink or cooktop cutout is one set charge.
Layout Plan & Slab Nesting64% slab yield
120 in96 inIsland 72 in × 42 inL-Shaped, 25 1/2 in deep, backsplash shown on wallsMain RunReturnSlab 1IslandSlab 2
Cut List by Slab5 pieces
PieceSizeAreaSlab
Main Run120 × 25 1/2 in21.25 sq ft1
Return70 1/2 × 25 1/2 in12.48 sq ft1
Island72 × 42 in21.00 sq ft2
Splash A120 × 4 in3.33 sq ft2
Splash B96 × 4 in2.67 sq ft2
2 cm vs 3 cm Thickness3 cm selected
ThicknessTotal WeightHeaviest PieceNo Support Up ToIsland Support
2 cm568 lb199 lb11 3/4 in4 brackets
3 cm847 lb297 lb15 1/2 inNone
Step-by-Step Countertop Math10 steps
Main Run120 × 25.5 = 3,060 sq in
Return70.5 × 25.5 = 1,797.75 sq in
Island72 × 42 = 3,024 sq in
Countertop area7,881.75 sq in ÷ 144 = 54.7344 sq ft
Backsplash216 in × 4 in ÷ 144 = 6 sq ft
Order area60.7344 sq ft × 1.1 = 66.8078 sq ft
Area-only slabs66.8078 sq ft ÷ (120 × 56.5 ÷ 144) = 1.4189
Nested slabs5 pieces with a 1 in saw gap fill 2 slabs, 64.5% of the stone used
Weight60.7344 sq ft × 13.954 lb/sq ft = 847 lb
Cost60.7344 sq ft × $60 + 32.75 ft × $12 + 2 × $150 = $4,337.06
Keep Seams 2 3/8 in From Sink and Cooktop Cutouts
Fabrication guides call for at least 2 3/8 in between a cutout and a seam or edge, with a support strip under it when closer than 6 in.

Countertop Calculator Results for Common Kitchens

An L-shaped kitchen with 120 in and 96 in runs plus a 72 × 42 in island has 54.73 sq ft of countertop, or 5.08 m². A 4 in backsplash adds 6 sq ft, and the stone nests onto 2 standard quartz slabs.

Each row below is a countertop calculator result at 25 1/2 in depth with a 4 in backsplash, 10% waste and 3 cm quartz. Cost uses $60 per sq ft installed, $12 per foot of finished edge and $150 for each of one sink and one cooktop cutout.

LayoutCountertopWith BacksplashOrder AreaSlabsSeamsWeightInstalled Cost
Straight, 120 in21.25 sq ft24.58 sq ft27.04 sq ft10343 lb$1,895
Galley, 120 + 120 in42.50 sq ft49.17 sq ft54.08 sq ft20686 lb$3,490
L, 120 × 96 in33.73 sq ft39.73 sq ft43.71 sq ft21554 lb$2,849
L, 144 × 120 in42.23 sq ft49.57 sq ft54.52 sq ft22692 lb$3,487
U, 96 / 144 / 96 in50.47 sq ft59.80 sq ft65.78 sq ft33834 lb$4,122
L, 120 × 96 in + 72 × 42 in island54.73 sq ft60.73 sq ft66.81 sq ft21847 lb$4,337
L, 144 × 120 in + 96 × 42 in island70.23 sq ft77.57 sq ft85.32 sq ft321,082 lb$5,443
U, 96 / 144 / 96 in + 72 × 42 in island71.47 sq ft80.80 sq ft88.88 sq ft431,128 lb$5,610

Run lengths in every countertop calculator row are measured along the wall to the outside corner. Weight covers tops and backsplash, and the order area adds the 10% waste to both.

Seams in a countertop calculator layout come from two sources. Every inside corner gets one, and any run longer than the 120 in slab gets another, which is why the 144 in back run of the U-shaped kitchen adds a seam on top of its two corners.

L-Shaped Corners Counted Once

An L-shaped countertop of 120 × 96 in at 25 1/2 in deep is 33.73 sq ft, not the 38.25 sq ft that two full runs suggest. Adding both runs counts the 25 1/2 × 25 1/2 in corner square twice, an extra 4.52 sq ft.

A is the area in sq ft, L1 the main run and L2 the return, both measured to the outside corner in inches, and D the depth. The return loses one depth because the main run already covers the corner.

That double count is 13% of the L-shaped top in any countertop calculator sq ft total. At $60 per sq ft it adds $271 to a quote, and on a U-shaped kitchen with two corners the error doubles to 9.03 sq ft.

In an L shaped countertop calculator estimate, the front edge also stops at the inside corner. The main run's finished edge is 120 - 25.5 = 94.5 in and the return's is 96 - 25.5 = 70.5 in, so the L needs 13.8 ft of edge, not 18 ft.

An island has no wall, so its full perimeter gets a finished edge in the countertop calculator edge count. The 72 × 42 in island adds 2 × (72 + 42) = 228 in, or 19 ft, which brings the default kitchen to 32.8 ft of edge.

Slabs Needed vs Square Footage

Square footage alone undercounts slabs, the most common countertop calculator mistake. The default kitchen orders 66.81 sq ft, which is 1.42 standard slabs by area, but the pieces only fit on 2 slabs once each is laid out with a 1 in saw gap.

Caesarstone's fabrication guide lists its standard slab at 120 × 56 1/2 in and its jumbo slab at 131 1/2 × 64 1/2 in. Each rectangle has to be placed on that sheet, since a 120 in run uses the full slab length.

JobSlabs by AreaSlabs After NestingStone Used
L 120 × 96 in, no backsplash, standard slab0.79171.6%
L 120 × 96 in, 4 in backsplash, standard slab0.93242.2%
L 120 × 96 in, 4 in backsplash, jumbo slab0.74167.5%
L 120 × 96 in + island, standard slab1.42264.5%
L 144 × 120 in + 96 × 42 in island, standard slab1.81354.9%
132 × 60 in island alone, standard slab1.38431.5%

In countertop calculator terms, the 4 in backsplash is a small area that can force a whole extra slab.

Without it the L-shaped tops fit on one slab, while with it the splash strips no longer fit beside the runs, so either drop the stone splash, use tile, or price a jumbo slab.

A 132 × 60 in island is both longer and deeper than a standard slab. It splits into four pieces with seams in both directions, which is the case where a jumbo slab or a 56 in deep top keeps the island whole.

A tile backsplash in place of stone is sized with the Tile Calculator, and the change often saves the slab that the stone strips would have needed.

Quartz, Granite, Marble and Quartzite Weight

A 3 cm quartz countertop weighs 13.95 lb per sq ft, or 68.1 kg/m², so the default kitchen weighs 847 lb. Its heaviest piece is the 120 in main run at 297 lb, the piece that sets the install crew and the cabinet bracing.

Stone2 cm Weight3 cm WeightDefault Kitchen, 3 cm120 in Run, 3 cm
Quartz9.35 lb/sq ft13.95 lb/sq ft847 lb297 lb
Granite10.50 lb/sq ft15.75 lb/sq ft956 lb335 lb
Marble10.63 lb/sq ft15.94 lb/sq ft968 lb339 lb
Quartzite10.50 lb/sq ft15.75 lb/sq ft956 lb335 lb

Quartz weights come from the Caesarstone technical data manual, which lists a standard slab at 417 to 463 lb in 2 cm and 639 to 675 lb in 3 cm. The midpoints of 440 and 657 lb over a 47.1 sq ft slab give the figures above.

Natural stone weights in a granite countertop calculator use density times thickness. Granite and quartzite at 160 lb per cubic foot and marble at 162 lb per cubic foot match the minimum densities in ASTM C615, C616 and C503.

In countertop calculator weight terms, going from 3 cm to 2 cm quartz cuts the default kitchen from 847 lb to 568 lb and the main run from 297 lb to 199 lb. That is a real saving on old cabinets, but 2 cm stone has shorter overhang limits.

A quartz countertop calculator weight check matters most for islands. A 96 × 42 in island top in 3 cm quartz weighs 391 lb in one piece, more than the heaviest wall run in any of the kitchens above.

Island Overhang Support by Thickness

Caesarstone lists a 3 cm quartz overhang up to about 15 3/4 in (400 mm) with no added support, and a 2 cm overhang up to about 11 3/4 in (300 mm). A standard 12 in seating overhang therefore needs brackets on 2 cm stone but not on 3 cm.

Seating Overhang2 cm Quartz3 cm Quartz
10 inNo supportNo support
12 in4 bracketsNo support
15 in4 bracketsNo support
18 in4 brackets4 brackets
24 inLegs or panelLegs or panel

Bracket counts in this countertop calculator table are for a 72 in island. The Caesarstone guide spaces brackets at 600 mm (24 in), so the count is the island length divided by 24 in, rounded up, plus one.

Brackets stop at about 19 3/4 in (500 mm) for 2 cm and 23 5/8 in (600 mm) for 3 cm. Past that, the top needs legs, columns or a panel at 24 in spacing, which is why a 24 in bar overhang changes the base cabinet plan.

These limits are for engineered quartz. Granite, marble and quartzite vary by stone and slab, so confirm the natural stone overhang with the fabricator before planning seating without support.

The same guide sets the seam rule behind every countertop calculator seam count. Keep sink and cooktop cutouts at least 60 mm, or 2 3/8 in, from any seam or edge.

When that distance is less than 150 mm, or 6 in, the Caesarstone guide calls for a support strip of the same stone under that area.

Installed Price Built Up

The default kitchen costs $4,337 installed at $60 per sq ft, or $71.41 per sq ft all-in. Stone on 60.73 sq ft is $3,644, 32.8 ft of edge at $12 per foot is $393, and two cutouts at $150 each add $300.

C is the installed cost, An the finished area with backsplash, P the installed price per sq ft, E the edge length in feet, pe the edge price per foot, Nc the cutout count and pc the price per cutout.

Pricing BasisInstalled CostAll-In per Sq Ft
$45 per sq ft installed$3,426$56.41
$60 per sq ft installed$4,337$71.41
$90 per sq ft installed$6,159$101.41
$1,800 per slab + $30 per sq ft fabrication$6,115$100.68

Buying by the slab charges for the whole sheet, and the default kitchen uses only 64.5% of its two slabs in the countertop calculator layout. At $1,800 a slab, the stone alone costs $3,600 before $1,822 of fabrication on the finished area.

That choice turns on yield. A countertop cost estimator figure per sq ft favors jobs with a lot of offcut, while a slab price favors layouts that fill the sheet, such as the 120 × 96 in L without a backsplash at 71.6%.

Edges and cutouts add up to 16% of the default total. A granite countertop calculator quote with a full island perimeter carries more edge cost than a wall-only kitchen, since the island alone adds 19 ft.

Measuring Runs, Depth and Backsplash

Standard kitchen countertop depth is 25 1/2 in, a 24 in base cabinet plus a 1 1/2 in front overhang. A 120 in straight run at that depth is 120 × 25.5 ÷ 144 = 21.25 sq ft, or 1.97 m².

Measure each run along the wall to the outside corner, and let the corner rule in countertop calculator math take out the overlap. Islands are full rectangles, with the seating overhang counted inside the island depth rather than added to it.

Backsplash runs the full length of each wall with counters, counted as strips in any countertop calculator for sq ft.

On the L-shaped kitchen, 120 + 96 = 216 in of wall at 4 in high is 6 sq ft, while a full 18 in splash is 27 sq ft and pushes the job from 2 slabs to 3.

Bathroom vanities are shallower than a kitchen countertop calculator default. A 61 in vanity at 22 1/2 in deep is 9.53 sq ft, and with a 4 in splash it fits on one slab with most of the sheet left over, so a remnant piece may cover it.

Add 10% for waste on a simple kitchen countertop calculator order, or more for veined stone that must be book-matched. Seal the joint where the splash meets the top, and the Sealant Calculator sizes the caulk from that joint length.